Find a professional kitchen sink installation service in NSW

The kitchen skin is blocked and needs fixing. The bathroom sink tap is loose.

Just need licenced plumber to reattach kitchen sink and tap upgrade

Install a kitchen sink , New sink and tap is provided. Property is a Villa and ground floor , easily accessible,ty

Need existing sink replaced as it is leaking. Ive purchased a new sink and mixer tap so ready to be installed.

Water Purifer To Fit Above the Sink. On The Counter Top, I have most of the parts, however I do not have the correct device to screw under the Tap to fit the Water Purifer.

Old unit, does not have tap for dishwasher under kitchen sink

I have a leaky sink drain and the washers are tight and cannot be turned. While you are here please fix an outdoor leaky tap and a toilet cistern that is always draining water.

Remove exisisting tap, and install new tap into same space. Zetland is my location

Kitchen sink tap is loose and needs to tighten

I’ve purchased a new kitchen tap that I need installed

the kitchen sink is dripping and the tap outside won’t turn off you can see in the pic of the kitchen sink i tried to tape it , that seems to be where the leak is coming from and the outside tap piece was recently replaced but now it won’t turn off , i have the hose in it to stop it at the moment please provide quotes for both tasks

The kitchen sink is blocked! The water from the dishwasher is backing up into the sink. It’s in an apartment unit. The block was built around 2016.

Remove existing mixer and replace with a new sink mixer in kitchen.

Kitchen sink is currently blocked. Needs unblocking

Replace one kitchen sink mixer No leak or issue, just want to replace as its old. Have attached photo of the old and new one.

Current under sink is water damaged. Replacement doesn't need to be wood, as long as it blends with the overall kitchen. I'd prefer something less prone to water damage. Cabinet Dimensions: Height: 106.8cm Length: 54.3cm Width: 77.5cm

Simple kitchen sink tap chaged

Job Description – Kitchen Sink Tap Replacement Task: Remove the existing kitchen sink mixer tap (purchased from Bunnings, already installed) and replace it with a new tap (new one already purchased). Details: • Access: Tap is installed in the kitchen sink, accessible from under the sink cabinet. • Old Tap: Standard mixer tap, connected to hot and cold water lines via flexible hoses. • New Tap: Standard kitchen mixer tap with all required parts included. • Steps Required: 1. Shut off hot and cold water supply valves under the sink. 2. Disconnect old flexible hoses from shut-off valves. 3. Unscrew mounting nut/plate holding the old tap in place from underneath the sink. 4. Remove old tap. 5. Insert new tap into the sink mounting hole. 6. Secure new tap underneath using the supplied bracket/nut. 7. Connect new flexible hoses to the hot and cold valves, ensuring correct orientation. 8. Turn water supply back on and check for leaks. 9. Test tap operation (hot/cold flow and swivel). Notes: • Please bring plumbing tools (adjustable wrench, basin wrench, bucket/towel for any water drips and all useable tools for replacing the tap i need the job to be done bring the right tools ). • Work area under sink may be tight, so a small torch or work light could help.

Need plumber to come reinstall or rectify a leaking sink tap mixer now. At Killarney heights 2087

I have a kitchen sink to replace the current one. I’ve been told that the hole doesn’t need to be cut differently to fit the sink by a builder, it’s a swap of the current with the new one. New one is a granite composite sink that needs a hole drilled (35mm diameter) and I have a new tap to put in