Find a professional gate installation in Coburg

Install a new gate latch and lock (provided) on a metal gate and wooden post. Metal gate will need some new holes drilled.

Works to be completed: Preparation, priming, and painting of all side and rear boundary fences and gates. Two (2) coats of paint to be applied, in addition to primer and surface preparation. Areas included: Left-hand side (LHS) timber paling fence: approx. 30m (one side) Right-hand side (RHS) timber paling fence: approx. 30m (one side) Rear painted Colorbond fence: approx. 12m (one side) 1 x timber paling double gate: both sides 1 x timber paling single gate: both sides Colour: All fences and gates to be painted Monument Notes: All timber fences and gates are new and unpainted. Painter to supply all materials, including paint, primer, and all preparation and application equipment. Price to include all preparation, priming, and painting works to achieve a durable, high-quality finish. Colour to be Monument (confirm exact product brand and sheen prior to commencement).

Side and back boundary fences and gates to be painted, 2 x coats plus prep and primer. LHS timber paling fence: approx 30m (one side) RHS timber paling fence: approx 30m (one side) Back painted colourbond fence: approx 12m (one side) 1x timber paling double gate (both sides) 1 x timber paling single gate (both sides) All timber fences and gates are new and unpainted. Paint to be supplied however all other materials (including primer) and prep work to be included in price.

Sliding gate fell over and need to be replaced. Can hopefully reuse some pickets and the track in the ground. About 4.5 m. Also remove old fence /parts and take to recovery centre.

I need the removal and disposal of a brick fence and the foundation / footing. This includes 2 metal gates (see photos) Brick fence - approx. 9m x 1.3m Two Steel gates - approx. 2m wide Footing/foundations- not sure how deep, but was built in the 1960's if that helps, ready to install a new fence. **Apologies as I posted this but had to cancel as I forgot to add photos and additional info. Please resend quotes if you sent through yesterday

Front gate has dropped approximately 1.5cm and needs to be squared, braced and re-hung onto brackets.

I need someone to come and install a latch on my side gate. The latch is from Bunnings and it’s all ready to go - see attached pic. I have removed the existing latch and ensured the new one will fit. You will need to drill into the metal gate (4mm drill bit) and ensure the pieces line up perfectly so the latch opens and shuts smoothly. It should be a quick job.

Looking for a qualified installer to build a fence and driveway gate at my mum’s home. Driveway gate (swing or sliding) – electric with remote access preferred, but open to manual option if needed. • Fence and gate made from material that allows us to see out but prevents outsiders from seeing in (e.g. privacy aluminium slats, perforated screen, or similar). • Approx. height: 1.8m (open to recommendations). • Gate should include lock and safety features. • Must supply and install all materials.

Looking for someone to come and install a wooden gate for our back fence. Fence approx 3m long. Requiring a gate (standard pedestrian gate) somewhere along the fence line.

Gate has been broken and security door damaged, would like someone to go have a look

Wooden gate installation to our driveway, preferably around 1.8m, extending from the dividing fence to the house side. Painting not required. Please see photos for gate type examples and location.

Need electricity wired from house to the front gate. Trench with cable wiring already exist, so just need the wiring to be connected to the house electricity. Also need power point on the pole on front gate.

Front gate hinge has come off and needs to be re connected along with latch so that gate can open and close I hate latches if needed Don’t want to pay to replace post Simply glue post, relocate hinge and latch

Fix / repair gate that does not close properly. Gate is rubbing against hanging poles and will not close properly. Needs to be repaired or rehung.

There’s a few issues with the driveway electric gate which seemed to be caused by the switch mechanism inside the power box. I would love to have this fixed by next Friday at the very latest. Examples: 1. Gate switch doesn’t fall into place every time i open the gate so very often once the gate has opened completely, the switch gets reactivated and pushes the gate back towards closing direction by about 10-20cm. 2. When opening gate goes further beyond the track limit and has started to slowly dig into the soil 3. Cog wheel sometimes slows down the gate closing automation. It makes a noise as if something was stuck underneath

I need two side gates built and installed i have 2 colourbond sheets that can be used with a new frame (to be built) - they will need to be cutup if the sheets cant be used, then i will buy two gates from market will also need to install locks width of the side path is 1.2M

Not shutting off mains water tap needs new 20mm Gatevalve, 20mm cupping 20mm, brass nupple. Ground floor unit. Easy access to water meter on a wall at shoulder height Licensed plumber Includes labour & materials & gst if needed Location Coburg

Hello, I need a sliding gate, posts and 4 fence panels removed and disposed from site today - gate is 3.6m long I'm here now and can help load if required Also a little bit of other mixed rubbish as per photo

I have a side gate that needs repairing ASAP - either sanding back the parts of the areas my dog has damaged or replacing the timber panels! I'm happy to paint afterwards if you prefer also!

The fence gate dropped a bit and I need a new hole for the bolt drilled in the gate