Find a professional gate installation in Brunswick West

I need a gate welded up, must be done in mig or tig- approx 12 welds, approx size 800 by 1700, gal 25mm SHS. We also need a plate welded on for a latch, will be provided. All materials will be provided and pre cut. thank you

I knocked the gate catcher for our shared driveway mechanical gate. Not the gate itself, that's working fine. I've realigned the catcher and everything is working with no issue but I think the bolts have come loose in the brick and are potentially slightly bent. It seems secure enough now but I'm looking for someone that's familiar with these gate catchers to come and properly secure it flush with the bricks as I don't want the catcher to come loose over time.

Remove gate off fence - leave main fence, just the gate needs to come off

extend gate deadbolt so it properly engages the strike plate I need a handyman to fix the locking mechanism on my gate. The deadbolt (sliding bolt) from the lock does not extend far enough to properly reach and engage the strike plate/receiver on the frame. Scope of work: Inspect the existing surface-mounted gate deadbolt. Replace the bolt mechanism or install a longer throw deadbolt so the bolt extends far enough to fully engage the strike plate. Ensure the lock aligns correctly with the receiver/keeper and operates smoothly. Adjust or replace the strike plate if needed to ensure a secure lock. The goal is for the deadbolt to extend further across the gap and securely latch into the receiver on the opposite side.

Wooden front gate catches on the closing post in cooler or wet weather. I’m open on the method to fix it. Even shaving off some of the post if that’s the easiest way (but still looks good).

Repair and paint metals gates

My courtyard gate latch no longer lifts and secures when I turn the latch handle making it hard to open and close and get in and out through my courtyard. Please fix the gate latch so I can open and close it from both sides of the gate - the courtyard side and driveway side.

I'm looking for a tradesperson to install a narrow gate along the side of my house. The area has a brick structure on one side and a wooden fence on the other (see photo attached). All materials and tools must be supplied.

Would like a fence and gate put up for the front yard. I believe the front is 12m across and 5m deep. Roughly 17m of gate and fence all up. Desired type of fence in photos and front of property also shown.

My external electric gate needs a tiny plug inside the box to go into the right spot and then a dial turned to make the motor work.

Metal gate broken needs to be repaired.

Secure the outdoor gate as it is not closing properly. Need to align the handle so the latch slides in (pictures should hopefully explain). The handle is on the left hand side in the pic

Remove old broken screw and re attach flat bar part of a D gate latch into wooden gate

Our wrout iron gate has broken at the hinges and needs repair ASAP as it is a security issue! Thank you - Due date: Needs to be done on Thursday, 25 May 2023

Timber on gate needs to be repaired and screws attached. - Due date: Needs to be done on Friday, 17 February 2023

to supply and istall a gate into an old pailing fence, at the back of the property. The fence is 1.8m high. The gate to be ~1.2 to ~1.5m wide. Will need new posts (at least one side (the side the gate is fixed to). May have to access the property from a laneway that's 3m wide) i.e. might not have enough access for equipment through the front of the property. - Due date: Flexible

Post seems have a become twisted/warped. Need someone to come and make it usable!

We need to get a cage bold welded back on and gate bolt repaired that has been bent - Due date: Flexible

Hello, I need someone with the necessary tools to help with the following: * Cut to size and install new corrugated sheeting for two gates * Cut / remove existing welded locks * Remove angle arm welded to retaining wall steel post I will be: * Providing corrugated sheeting, screws * Removing existing corrugated sheeting Thanks - Due date: Flexible