Find an experienced flooring expert near you

Levelling of a concrete floor and installation of supplied rubber gym flooring and underlay approx 40sqm.

Looking for an experienced flooring installer to: * Remove and dispose of existing vinyl flooring and vinyl skirting. And Install new vinyl flooring. Laundry is a small room measuring: * Length: 1900mm * Width: 1300 mm Photos and dimensions below.

Laminate flooring replaced in the theatre room. Supplied and installed. Give me an offer or can come and give me a quote

Looking for a site quote from a hardwood flooring installer, or skilled carpenter to provide and install a neat level transition between two existing timber floors. The two floor types meet in a straight line but are different timbers/colours (Baltic Pine & Tasmanian Oak). I would like a custom timber transition strip (or brass metal) made and installed to create a clean, intentional finish i.e. recessed. Scope of works: Inspect existing flooring junction. Supply suitable timber transition strip (matching or complementary timber such as Tasmanian Oak). Rebate the strip into the flooring join where required. Finish flush or as close to flush as practical with the existing floor surface. Sand, stain and finish to complement one or both floor finishes. Leave with a professional, tidy appearance. Alternatively a 10–20 mm wide brass flat bar recessed into the floor (example pictured - can purchase strip with suggestion).

Harringon board floor installation approximately 200mtr square

we have removed old carpet and underlays and timber edges would like someone to lay glue down vinyl planks - we have the boards and a tub of the glue just install required It’s a main bed and walk in robe approximately 20sqm

Install floorboards. Carpet has already been removed. I will provide the floorboards

Contractor pulled out late. Need supply and install of light oak clip in flooring. Double storey in Footscray. Attached are photos of another property we would like to replicate

Need a professional to Lay/Install 30 m² of Hybrid Flooring. Lounge room and small hall. (photo shows the room, but of course it will be completely cleared on the day.) Tuesday, June 2

Remove carpet and install hybrid floor

Remove some existing boards to match up the lengths, remove some quad along the window wall to fit in boards and match up, install floor boards into and through small room 3m x 1.5m. Underlay and boards provided.

Install deck in backyard

I have 25m2 of hybrid parquetry flooring i need installed as well as 10 linear m of skirting.

Scrape off floor underlay

Experienced Handy person needed to install floor boards Approx 2.5m2 Engineered floor boards - glued down to concrete Please apply if you have experience Must bring own cutting tools. etc Floor boards and glue included - Install on Monday May 11 - preferable morning

Help me lay vinyl planks on my floors very small house only doing kitchen living and dining

I have 10mm Hybrid floor already installed by myself. I need approximately 40 linear meters of quads installed. Each quads is 2.4M. I have 24quads. Want all the quads done with 45 degrees angle in corners and wherever necessary. Installed with NAIL GUN not liquid nails.

I need somebody who has previous experience to install hybrid clip in floorboards to the ground of my yoga studio. As you can see in the photo we have the floorboards lay out- there’s more to complete the space.

Floor boards broken, new boards need to be relayed I have spare floorboards, install only required

Floor sanding and polishing of hardwood floor (50m2)

Looking for someone to Sand and Polish the floors in a 3 bedroom house in Bass.

Timber Floor Sanding & Polishing (Living Room) Looking for an experienced professional to sand, prime, and finish my living room timber floors with 2K water-based polyurethane. Floors are currently in good condition. Scope: Sand back to raw timber Light surface prep if needed Primer + 2–3 coats of 2K water-based polyurethane Clean, high-quality finish Details: Location: Warranwood Flexible timing About 60-70 sqm

Requiring sanding and polishing of floorboards

I need the floorboards in my rental property sanded and polished. The house is empty and the area small. Can be done anytime/any day before Wednesday 10/06/26. See photos for current condition, photos of the area and floor plan showing the size of the lounge/dining.

I need a bedroom 3.7 m by 3.5 m and a kitchen 2.3 m by 3.5 m and a small patch of hallway need sanding and repolishing. The hallway and kitchen are clear but the bedroom will need furniture removed. The floorboards are in good condition and don't need specific repairs

- sand back and polish the floors of a Queenslander which recently had the carpet removed. 3 beds, kitchen and living room

Sand and polish hardwood floors – approx. 70m² Residential. Looking for an experienced floor sander/polisher to sand and polish hardwood timber floors in a house. Job details: • Approx. 70m² of hardwood flooring • Sand back existing floors • Apply polish/coating finish • Must supply own equipment and materials • Must have experience with timber floor sanding and polishing • Looking for a neat, professional finish Please include in your offer: • Your experience • What coating/finish you recommend • How many coats are included • Estimated time to complete the job • Availability Photos can be provided if required.

Task: Floorboard Prep Sanding & Polishing Brief description: Lightly sand, prepare (take out any random staples/leftover nails from carpet removal if any, fill any cracks or holes), and polish floorboards of 3/4 of a house (see floor plan red circle area). Please apply x3 coats of polyurethane as per usual standard. Details: • Location: Doncaster • Access: Easy driveway access, single story, no furniture or obstacles • Tools/materials: You’ll need your own tools and products for prepping, sanding, polishing. Scope: • 3/4 of house (see picture floorplan) • Vacuum/clear up sanding dust before polishing Timing: Around 12 - 21 June. Please quote your total price and confirm availability around 12 - 21 June. Experience with similar timber floor jobs required.

My house has polished hardwood floors but they are quite scuffed and scratched in some areas. House is 130m2. I'm assuming full sand and polish is expensive (~$5000+) so Im looking for a cheaper, simpler solution and curious what it would cost to just give them a polish to try and improve their finish. I presume it won't solve deep scratches much but might eliminate the scuffed areas and improve the floor appearance overall. Am open to the idea of potentially spot sanding and polishing just the bad areas in the photos and it doesn't stand out significantly Please see photos and suggest approach and cost.

I need to get my Queenslander balcony sand & oiled

Light buff of floors and polish in a 3 bedroom townhouse. Boards are floating floorboards and in good condition, they have faded in some areas from sunlight and we want to touch them up prior to sale. Location: Seaholme, VIC Objective: Restore flooring to near-new presentation suitable for sale campaign Buff & Recoat with water based matte polyurethane (good quality) Meals area is 3.3x4.1m, living area is 4.8x5

sand and polish an existing timber floor in a two bedroom unit

Looking for someone to sand and polish timber floorboards in my unit. • Timber appears to be cypress pine Please mention how much the quote is going to cost • Floors are in decent condition, just need sanding and resealing

Sand and polish around 40 Sqm fooor

I need an experienced flooring professional for a two-stage job in my kitchen in Aspley (QLD). Stage 1 – URGENT (before 17 Feb): • Remove existing cork flooring and cement sheet underlay • Deal with nails/staples properly • Leave timber boards clean and ready for kitchen renovation This part must be done before 17 February. Stage 2 – After kitchen renovation: • Sand and polish the timber floor • Match the finish to the rest of the house (appears gloss, but to be confirmed) • Open to professional advice on finish type to ensure a good match Area size: Approx. 2.4m x 2.4m What I’m looking for: • Experience with older timber floors • Own tools and sanding equipment • Ability to match existing floor finishes • Clean, professional workmanship Kitchen renovation is underway — sanding/polishing will be scheduled once installation is complete.

Looking for someone to remove lino and sand/polish floorboards.

I want to polish and varnish my current stair treads. Want them to look brighter, similar to oak color. I've taken all out, twelve in total, dimensions of each are: 900 x 235 x 45 There are some nails and staples due to the carpet I removed. Two of the stairs are partly broken, I attach some pictures so you can see. I have the existing parts and the balustrade if needed. I can bring all the stairs to your place. Thanks

Need to sand and polish 5 bedrooms, two living , rumpus , walkways. Need to retain the patterns. Refer to photos

Need a sand and polish of 27 sqm of wood flooring

The deck that came with our house was poorly finished. It needs the old finish stripped and a new finnish applied.

Refinish approx 16m2 of timber flooring. Peroxide markings. Only 2m2 have the drip markings I foolishly let 6% peroxide drip on the floor.

8 - 12 boards on wooden floor need sanding to remove small areas of scratches and then refinishing with polyurethane varnish.

3 bedrooms house in wantirna, hardwood floor needs sanding and coating. Not sure how much it cost, quote on site? or square meter price?

Timber floor repair / sand and refinish small damaged patch I need someone experienced in timber floor repair to inspect and fix a small damaged/discoloured patch on polished timber flooring near the skirting board. The area has surface wear / sanding marks / finish removed, so I need someone who can: assess the damage properly advise whether it needs spot sanding and colour matching re-stain / recoat / refinish the affected section so it blends with the surrounding floor as closely as possible

Sand and refinish timber floor in small room (~9m²). Looking for experienced floor sanding professional (not handyman). Want a light Scandinavian/blonde finish with matte seal—no yellow/orange tones. Please include materials and 2–3 coats. Must provide photos of similar work. Prefer test patch before full job.

We are putting our house up for sale and need some help replacing with some damaged floorboards. And also stopping other floorboards squeaking in the hallway. There are some other odd jobs I'd love some help with. We can discuss if we meet up.

Want a slightly darker/less orange colour that will not show as much dirt and not scratch so easily. The treatment on the floor currently is not enough for the foot traffic we get in the store. Scratching in one room but minimal scratching in the other. Both about 6x4 rooms

We have Baltic pine floorboards that need refinishing (sanding and polish) They are currently overlaid with vinyl flooring which will be removed before works commence 2 rooms at roughly 30sqm total

Looking for someone to sand back and refinish my outdoor timber bench seat, then seal it with a durable natural matte finish. Bench seat is removable and can be taken away to complete off site. I would like pickup and return included. Size Approx 3.0m long x 0.4m wide. Finish required Natural matte, low sheen. Prefer the most durable option for outdoor use. Happy to follow your recommendation, but I am leaning toward a quality exterior decking oil in a natural matte finish for longevity and easy maintenance. Scope of work: - Transport off site - Sand back to an even finish (top and edges, tidy up the ends, bottom if needed) - Prep and clean properly before coating - Apply stain if needed to even out colour, otherwise, clear natural is fine - Apply exterior grade protective finish in natural matte (2 to 3 coats as required, coat all faces including: top, edges, and ends and bottom if recommended) - Return Please include in your offer • Total price including materials and pickup and return • Product system you will use (brand and type if possible) • Estimated turnaround time • Photos of similar outdoor timber refinishing work Timing Flexible, ideally within 7 to 14 days.

We have removed the carpet from our staircase, and it need sanding and refinishing. Total 15 steps Pls send me your quote price

Refinishing of timber floors (downstairs) in a Reservoir townhouse. Approx 40m2. Refer floorplan I've highlighted in blue the extent. There are some gaps between boards that need to be filled in a few areas. Sand and refinish floors to new condition. Use hardy sealer / polyurethane coat. House has been recently painted and new carpets etc so dust suppression must be used.

I have approx 35 square metres of floorboards that need sanding back to bare timber. I don’t need them refinished as we will do that.

Looking for an experienced tradie to fully sand back and properly refinish internal timber stairs. Anytime between 20th and 25th Jan Details: Approx 14 timber treads (including winders) Existing finish is worn on nosings with a few scuffed areas 2 small gouges to be repaired with timber filler Require full sand back to bare timber (not just a light scuff) Refinish with a high-quality stair-grade clear varnish or polyurethane Minimum 3 coats, suitable for stairs (durable, non-yellowing) Materials to be supplied by you and included in the price Clean, tidy job with proper prep and cleanup Please include in your offer: What product/finish you will use (brand + water/oil based) How many coats Estimated timeframe and drying time between coats Examples of similar stair work if available Home is occupied, but I will be out each day, however walls have just begun painted , so clear communication and care with dust and drying is important. I’ll check quotes later today, will reply then.

I need a small section of timber floorboards (doorway area – see photos) sanded back and refinished to match the surrounding treated floorboards as closely as possible. The area was previously covered by tiles and has old adhesive/paint residue and uneven finish. I’m after a professional result that blends in with the existing floor. Scope of work: • Sand back the existing timber boards to bare timber • Remove all residue/old finish • Prepare surface properly (fill if required) • Stain/colour match to existing floorboards • Apply suitable clear protective coat (polyurethane or similar) • Clean up after job • Supply and apply all required materials Details: • Area size: approximately 1100mm x 1100mm • Location: indoor hallway / door threshold • Access is easy • Photos attached Requirements: • Experience with timber floor sanding & finishing • Own tools and materials preferred • Ability to colour match existing floor as close as possible

Hi there! I'm looking for someone to restore the back deck of my house in Heathmont, Melbourne (approx. 22m2, including steps and balustrades). The job includes: Sanding the deck back to bare timber (currently weathered/old finish) Smoothing edges, steps, and tight spots Cleaning & preparing the surface for finish Applying deck oil or stain (supplied or agreed upon) Requirements: Own equipment (random orbital sander, vacuum attachment, brushes/rollers) Experience with timber decking restoration Ability to complete efficiently and neatly Reliable, punctual, and professional Timing: Flexible - hoping before Christmas but understand if that’s not possible. Payment: Open to quotes. Please provide your estimate

Approx 26,60sqm of decking needs to be sanded down and refinished at my place. Divided in 2 different areas (front and back balconies). Easy access, floor level, timber in fair condition, no damage. Please send me an estimate or quote. Needs to be done before end of Jan 2026 but as soon as possible really. Cheers.

I am seeking an experienced and professional flooring specialist to complete a high-quality refinishing of my indoor solid hardwood flooring and spiral staircase. This project requires proper equipment, attention to detail, and the ability to deliver a smooth, uniform, premium finish. Scope of Work 1. Timber Floor Refinishing (Approx. 40 m²) Sanding & Surface Preparation Fully sand timber floors back to bare wood using professional-grade sanding machinery Precision edge sanding and detailed finishing at corners, skirting boards, and transitions Surface preparation including: • Filling minor gaps where required • Smoothing sanding marks and imperfections • Levelling surface to ensure an even base prior to coating 2. Application of Premium Clear Coatings Apply 2–3 coats of high-quality, non-toxic, water-based clear varnish Light sanding between coats (if required) to achieve a smooth, uniform finish Materials can be supplied by me, or you may provide a quote inclusive of all materials and labour 3. Final Protective Seal Apply a final non-toxic protective sealer for enhanced durability and scratch resistance Ensure a consistent, even, high-quality finish across the entire floor area Maintain and highlight the natural timber grain and tone 4. Spiral Staircase Refinishing (14 Timber Steps) Careful machine or hand sanding of each step, including treads and risers Precision detail finishing on edges, corners, and curved spiral sections Application of matching varnish/stain and final protective sealer Consistent finish to match the main flooring area Extra attention to drip prevention, smooth transitions, and edge accuracy Additional Requirements: Use of dust-minimizing sanding equipment preferred Clean and tidy workspace during and after completion Professional workmanship with consistent coating results Clear communication throughout the process Option for on-site inspection before finalizing the price

Existing timber floor requires sanding back and refinishing with water based coating system. Approx 147m2 in total Quotes welcome

Timber floor in loungeroom refinished.