Find experienced local fencing contractors in Kensington VIC

Fence palings require preparation and spraypainting

Remove the fence palings which are in a pile near a roller door at the back of the property.

I need 4 x 4m steel posts installing so require quote to: - drill post holes 300w x 1400 deep - concrete in holes - formwork & concrete around post base (soil height will be raised 400mm later so need to cover post) - set posts & brace I have the posts but need concrete supplied. Ground is heavy clay so not easy to dig by hand. Post to go in between slab and fence - see pic.

Need 3-4 steel pipe fence rails cut in half to be able to fit in skip. Angle grinder... approx 4 cuts needed.

My grand mother need s fridge delivered tomorrow and the fence is stooping the delivery guys from entering the froht door. Keen to bring a electric saw to temp remove fence?

Looking for somebody with experience to install simple timber boundary fencing. Measurements are 5.5m width + 3m height. Will we paint in charcoal ourselves afterwards. Will attach to existing fence on neighbours side. You will need to provide all of your own tools and also ensure that the edge is sealed as there are currently gaps between the boundary on both side to the existing fence.

I need 4 x 4m posts installing so require quote to: - drill post holes 300 x 1400 - concrete in holes - set posts & brace I have the posts but need concrete supplied. Site access is ok but a concrete delivery would be (level) 15m away from worksite.

Quotation is a Must since it is a shared fence. While paling fence needs to be replaced. End of the paling there is an existing brick fence which is missing some bricks and that needs to be fixed. Bricks are available.

Metal lattice with jasmine is coming away from fence and needs to be properly secured. Two fences, each is approx 4 metres long.

Budget flexible based on material costs and selected option. Require single gate installation from side street. Preference is for iron gate, however open to other suggestions. Pictures are of existing setup. Existing gate has been mounted on adjacent fence. Fence is sagging slightly, causing gate to slump. There may also be limitations in concreting new posts (if required) due to existing fence post. Width is approximately 900mm between posts, except for towards the top where the sagging has occurred. Posts are 50mm width. No preference on height, however taller (1600+) is preferred for security purposes. - Due date: Flexible

Build a timber fence 1.5m wide and approx 2.2m high. This fence will adjoin a free standing roller door at the rear of the property. - Due date: Flexible

Need new fence either timber or steel Powder coated - Due date: Flexible

There is a timber dividing fence between mine and my neighbours balconies. We need it removed so underneath can be properly waterproofed and capped before the fence is put back. - Due date: Flexible

We need someone to fix our fence that has become detached from our balcony wall and pulling down our ac lines. This fence bridges the boundary between 3 properties and is leaning. We at least need the fence secured on the side that has detached but would also want the fence reinforced if possible. The other side is the neighbour's property which we can arrange access to. The black poles seen to be loose in the concrete. Not sure the cost so please send me quotes and what you'd be able to do. - Due date: Before Tuesday, 13 December 2022

Hello, Looking for a carpenter or handyman to replace what looks like rotten crossbeams of back fence. Please quote. By my assessment, all 12 will need replacing and they are approximately 1900mm each of 70x40/50 sections. These should be treated timber, primed would be a plus. Access to only my side will be available and all building waste and job debris will be expected to be taken away. In addition, 3 x ~1800mm sleepers need to be removed and replaced, these are 75x200 sections No painting required. Intervention with garden should be minimised. Will have access to only my side of the fence. - Due date: Before Friday, 7 October 2022

Remove old timber fence & roller door.remove bushes X5 along fence line.Erect colorbond 24.5 mts 1.8m high with timber sleeper supply 2 new RHS 100x100 posts 3mts high to support new roller door. (2500h X 3100w) supplied supply double swinging gate 3.5 MTR width mid way in fence. Woodland grey colour. - Due date: Flexible

The fence is 6 ft long. It’s replacing a corrugated iron fence with a paling fence. Two posts need to be replaced. You quoted $800. The neighbour wants a quote.

3M roughly to protect our garden from our puppy. Need someone to come and install it as well as supply it.

Want to take the old fencing out, clear some of the planet that is on the way, and replace the fence with colorbond product and a 820mm gate at the backyard. (4200mm+3500mm)x1900mm Height, approximately 8 posts required concrete footing that goes at least 700mm deep, 450mm wide. Removing unwanted grass and rubbishes in the bush to make a clean soil surface around the house.

Approximately 20 metres of fence to be replaced at rear of residential property . Either with wood or colour bond fence. - Due date: Flexible