Find experienced local fencing contractors in Glen Iris VIC

Just need to repair the fence by placing a wooden plank to stabilize it

About 10m length brick wall fence footing -concrete job

Hi, I am looking for an experienced carpenter or handyman to complete two timber-related repair jobs in our sideway. Job 1: Install a New Side Gate Remove the existing chain-link wire gate (as shown in the first picture).Dig a hole and set a new, strong timber gate post with concrete. Build and install a single-opening timber pedestrian gate (Size: 1600mm Wide * 1900mm High).Install hinges, latch, and a secure lock. Job 2: Straighten and Reinforce Leaning Fence. As shown in the second picture, a section of our timber boundary fence is leaning. You will need to dig holes, install about 3-4 new reinforcing support posts, pour rapid-set concrete, and securely bolt the leaning fence back to straight/upright position. Materials & Tools: This is a LABOUR ONLY quote. You must bring your own professional tools (post hole digger, drills, levels, etc.).I will reimburse you for all materials (timber, gate frame/kit, lock, concrete bags) based on your Bunnings receipt. The old gate must be taken away. Please provide your best fixed price for the total labour. Ready to hire immediately. Thank you!

My neighbour’s fence was hit by my contractor’s van and caused certain damages

There is a hit from the Van and caused some damages, requires fixing

Fence need repairs, post replacement and refit and secure

Fence: Timber fence approx. 36m long x 1.8m high Scope: Minimal repair only (no painting) What I need done: Re-fasten/secure any loose palings and rails Tighten/replace fixings where needed (screws/nails) Replace 3–6 timber palings/planks (max 6) that are damaged Make the fence solid and tidy, ready for painting later Clean up and remove any small debris off-site What’s NOT included: No post replacement / no re-levelling the whole fence No full fence rebuild No painting Budget guide (please quote accordingly): If you supply materials: Budget $400–$800 (include materials + pickup) Materials: You supply materials: You supply palings, fasteners, and any small consumables What to include in your offer:: Estimated time required Any assumptions (e.g., “up to 6 palings included”) Confirmation you have the tools to cut/fit palings and securely fix rails Timing: Flexible — ideally within the next 1–2 weeks.

The pool fence gate hinge has come off as the screws are corroded. Needs to remove corroded screws and replace with new ones. Needs to adjust the second pool fence gate so that it closes automatically.

About 1 meter high timber picket fence. Sloping line and the fence to be stepped to follow the fall. The length is approximately 10 meters. 125x75 cypress posts, 2 CCA treated pine 75x50 rails, 1000mm pickets, 7 posts. No bottom plinth. The hole dimensions 300x600mm. The work includes supply and install the two sections of the fence. Painting is optional.

Repair the fence, about 1M

Installation of wooden street library. Requirement of post securely into the ground

Need to fix or replace part of our fence

Hi, Need a shared boundary wooden fence repaired. Scope of works as below: - Repair approximately 10-12m of fencing (6 foot high). Re-use current fence panels where condition is good, replace where broken/bad condition (looks to be 6-10 replacements from what I can see). - Repair any broken foundations (see photos) - Repair any slatted fence on top of the fence - Add 3 additional slatted fence missing (see photos). Price to include supply of all material and works. Regards Ching

Need fence repaired. 2 fence post has rotten so will need 2 new posts dug out and secured with new post then reconnect/prop fence back to post.

Paint property boundary side fence (residential). Dimensions: Length: total 35 metres (20 metre section + 15 metre section) Height: 2.85 metres Colour: Monument grey/charcoal

I have creepers in my backyard that aren’t growing like I thought they would I think I need to create a better lattice for them to grow on

Fence needs to be pushed in place, its leaning towards one side.

I need a gate installed in my fence, preferably using the same wood so it won’t need to be painted.

I’m looking for someone to repair a section of fencing where three properties meet. The fence has become disconnected at a T-intersection on the boundary between our property and two neighbours. The job involves reconnection and reinforcing the join - potentially using brackets or another secure method. All three neighbours are happy to provide access from their side of the fence on Friday in Glen Iris. Photos are from two sides of the fence.

1. Replace 4 broken/damaged timber fence palings. Pailings are provided, but needs to be cut to match existing fence paling. Where pailings are cut, touch up painting of exposed timber is required. Paint is provided. 2. Reattach around 4 loose fence paling to frame. 3. Add screws to door hinges. 12 screws per door. 15 doors in total. Screws are provided.