Find experienced local fencing contractors in Burwood VIC

Fix existing fence or new one depending on assessment of condition

Hi, I need one section of the paling fence to be replaced as per the picture. - take down and removal of old fence - approx 5.8m - 1.95m height - materials to be provided by installer

Looking for someone to supply and install a side gate on the side of the house. Height: 1.8 metres Width: 2 metres Prefer colour bond gate, or steel frame with Colorbond infill) for durability. Existing timber fence is not stable and should not be used as a load-bearing post. Gate needs its own posts or be fixed to brick wall. Please have experience with gate installation and provide all tools. Open to discussing materials and design options.

Need to fix fence need to make it straight

Replacing old paling fence on the boundary. 36.58m long. Require 2.7m post, 700mm in the ground with concrete mix or post mix cement, and waterproof coating on the base of the post. Disposal of the old fence also required. I will clear the vegetation nearby prior to the work.

Need to supply and install a side gate

Remove current side gates and install new gates. Gates, hinge and latch provided. Gate 1 is horizontal slats and gate-2 is vertical slats Gate-1 requires cutting through slats (see image) Gate-2 requires adjustment of width by 30mm.

Install 6 m pool fence Posts, panel, screws , brackets , instant concrete mix all provided . You need to bring driller.

I need somebody to notch out 3 fence post for an install. I will install posts, just need them notched out to fit existing rails.

About 30 meters fence need either reapir or replaced.

（update, fence is now collapsed further, see new photo) A section of fence with my neighbour has broken off, I want to help fix it as part of goodwill, just need it to be fix temporarily so it can be safe for my neighbour until full replacement

7 brick pillar/post for front fence with 1200mm height frock fence in between posts 600mm and 2 planter box

Fence is pretty old, need to replace some of the cracked beams and pole. Budget is negotiable, I just don't really know how much it would cost - feel free to give me a quote.

Install aluminium panel fence. Materials will be supplied. Length 6.5m. Got 2.5 panels each 2.4m wide and 1.2m height. Needs 3 posts and brackets as required.

Building a timber fence on retaining wall 15 meters Have all materials and tools

Need fence done in the missing bit. Length 2m and height is 1.2m see attached photo. Quote for supply install labour posts etc etc

Need 1 timber pailing fence . 2m by 1.2m high battered down. Will need 1 post Pls quote supply install See attached picture

Timber fence I have a small challenge job . I have an easement on my boundary with neighbour and i am on higher ground. Since i am on easement i cant build a retaining wall so i need a very very strong fence with 3 plinths (200mm each) so 600mm high which can do a job of retaining wall and then 1.8m high fence on top of the plinths With Length 21m Pls only experienced guys quote

I would like to replace my backyard gate with a taller and stronger one . Dimensions are 2.1m *1.78m. You need to come and measure it yourself.

Old fence came down couple of years ago due to wind, new fence erected. But, the last fence screening panel need to be nailed back as shown in the photo, then paint the fence (about 20m) I do not have the paint, so supply and install