Find a fence installation professional in Glen Iris VIC

Hi, I am looking for an experienced carpenter or handyman to complete two timber-related repair jobs in our sideway. Job 1: Install a New Side Gate Remove the existing chain-link wire gate (as shown in the first picture).Dig a hole and set a new, strong timber gate post with concrete. Build and install a single-opening timber pedestrian gate (Size: 1600mm Wide * 1900mm High).Install hinges, latch, and a secure lock. Job 2: Straighten and Reinforce Leaning Fence. As shown in the second picture, a section of our timber boundary fence is leaning. You will need to dig holes, install about 3-4 new reinforcing support posts, pour rapid-set concrete, and securely bolt the leaning fence back to straight/upright position. Materials & Tools: This is a LABOUR ONLY quote. You must bring your own professional tools (post hole digger, drills, levels, etc.).I will reimburse you for all materials (timber, gate frame/kit, lock, concrete bags) based on your Bunnings receipt. The old gate must be taken away. Please provide your best fixed price for the total labour. Ready to hire immediately. Thank you!

Fence: Timber fence approx. 36m long x 1.8m high Scope: Minimal repair only (no painting) What I need done: Re-fasten/secure any loose palings and rails Tighten/replace fixings where needed (screws/nails) Replace 3–6 timber palings/planks (max 6) that are damaged Make the fence solid and tidy, ready for painting later Clean up and remove any small debris off-site What’s NOT included: No post replacement / no re-levelling the whole fence No full fence rebuild No painting Budget guide (please quote accordingly): If you supply materials: Budget $400–$800 (include materials + pickup) Materials: You supply materials: You supply palings, fasteners, and any small consumables What to include in your offer:: Estimated time required Any assumptions (e.g., “up to 6 palings included”) Confirmation you have the tools to cut/fit palings and securely fix rails Timing: Flexible — ideally within the next 1–2 weeks.

About 1 meter high timber picket fence. Sloping line and the fence to be stepped to follow the fall. The length is approximately 10 meters. 125x75 cypress posts, 2 CCA treated pine 75x50 rails, 1000mm pickets, 7 posts. No bottom plinth. The hole dimensions 300x600mm. The work includes supply and install the two sections of the fence. Painting is optional.

Installation of wooden street library. Requirement of post securely into the ground

Need to fix or replace part of our fence

I need a gate installed in my fence, preferably using the same wood so it won’t need to be painted.

looking to install some netting to prevent balls going over the fence and into pool. a few options on how to do it (poles, connect to house) so perhaps best if someone local to glen iris that have a look and discuss. small area

A post on a pailing fence is leaning. Appears to be rotting at the base. It needs replacing or repair.

Supply and Install a new timber paling fence (plus demolish and removal of existing fence) Measurements: 7.5 meters @ 950 mm 3.9 meters @ 950 mm - 1950 mm (scaling height) 30 meters @ 1950 mm (1800 mm planks plus horizontal plinths) In your quote, please specify if this is LABOUR only (and to quote materials separately through PY) or if this is LABOUR AND MATERIALS. Please note there are existing bushes / trees on either one side of the fence or another so full 600 mm clearance isn't always possible. There is also a shed that may need to be shifted so the planks can be nailed in (will need your assistance to do this if required).

Require someone to: 1) build gate and extend railing as diagrammed 2) repair stair railing Ideally using same picket fencing and same railing material if possible. Gate needs to be able to lock (although I can supply this if required). * not painting required

Replace stumps to a 7 foot timber fence that is leaning on to neighbour's property as the posts have rotted.

replace fence about 17meter.

Use concrete to secure metal posts and then attach wooden gate

We have a chicken coop but need a fox proof chicken run to be built so our chickens are contained and safe to roam in our backyard. Run will run across side fence so will need 3 sides. Will need some one to measure, decide what size is best and then to safely construct.

Require a gate/door installed for the backyard Width-1280 Height (of the post on the fence)-2150 Open to the type of material that mat be used If you have any questions please feel free to ask

We need someone to install a dog door for our puppy and possibly construct a fence/enclosure to make the yard secure

fence replaced that is like for like and screening approx 24 m long

Need to replace the paling fence. Length @5m, height 2.1m. Need to trim and re-align the retaining wall (see picture) and dispose of the old fence, rubbish etc. - Due date: Before Sunday, 25 February 2024

Our corrugated fence has come off on one side and needs to be fixed up. The bottom railing has rotten and needs to be replaced, the other two might require replacing as well. The railings and the part of the fence to be fixed are about 3.5m long and the post is about 1.5m tall. We are flexible about the exact date and time but needs to be done before next Monday. Details: Fix up fence, replace at least the bottom railing (and up to all 3) and clean up after. Please state what your quote includes - Due date: Before Monday, December 11, 2023

Newly built home. Side gate put in as part of landscaping, but we are not happy. Need it replaced. Must be timber and can be locked from both sides. Approximate dimensions are: Height : 204 cm Width: 155 cm