Find a fence installation professional in Yarraville

Complete replacement of one lockable side gate (post is very loose). Repair of a side fence. Repair/rehang of a front gate that is getting stuck against the ground. Repair of 2 x small waist height gates where panels are loose/broken. Please see pictures for details. Seeking like for like repair/replacement of each. Quote to be fully inclusive of time, materials and disposal of the old gate/panels. Thanks.

Looking for an experienced fencer/carpenter to replace the existing front fence and pedestrian gate at my home in Yarraville. Front boundary is approximately 7–8m including the gate. Measurements to be confirmed on site before starting. * Remove and dispose of existing timber/wire fence and gate * Supply and install new traditional timber picket fence * Approx. 900mm high * Matching pedestrian picket gate in existing location * Traditional pointed/spear-style pickets * New timber posts and rails as required * Paint/finish fence in exterior white * Retain and protect existing garden and trees * Retain/integrate existing house number and mailbox where possible * Remove all waste and leave area clean Looking for a simple, traditional picket fence that suits the existing weatherboard home. Please include labour, materials, removal/disposal and painting in your offer. Happy for you to inspect/site measure if required. Photos of existing fence attached. Please send through examples of similar work if available. Budget: $2,000

10.5 Mtr * 2.1 mtr height Supply and install of Backyard fence including removal and disposal of existing.

2 fence posts that have rotted at the base to be removed and replaced.

I am wanting a pedestrian gate installed. Would like it to be black aluminium style or wooden. It’s about 1m wide gap between the brick wall and the timber fence. Example photos attached of style - open to height whether low about 1m or up to 1.8M tall. Hoping to find out easiest way to do this and quotes. Thanks

I need 2 fence posts that have rotted and need to be replaced. The rest of the fence is intact.

Install an 11m standard fence

Need a fence put in from house to boundary fence with a pedestrian gate. Have attached style below

1) Increase height of perimeter fence, make pedestrian entrance gate, and make room for pillar mail box. 2) Install motorised sliding gate for car.

Fence, Metal post and timble panel on metal gate frame need to be replaced. Metal gate frame seems ok

Install sports netting to colourbond fence - netting and poles ready and in position just need someone to secure and attach to fence

Front gate requires repair / replacement as the latch doesn’t properly close the gate

Two jobs: Pointed feature fence: Old fence needs to be straightened out. A couple posts to be straightened up and a few broken panels replaced Standard side fence (approx 21m) Needs to be replaced with new timber fence

One of our pool fence panels have broken install of a panel that’s 1.2m height and 1.55 or 1.6m wide. Frameless Install is to slide into two existing floor stands. Probably need two people See photo The glass panels are available for sale under $200. Standard 12mm thickness See picture

Front fence build for unit block. With electronic gate.

Need 13m of paling fence removed and replaced (1.95m high). The site has no street access and requires walking from a near by street, I’m happy to factor this challenge into the quote.

i) Left hand side - 6.50 metres ii) Rear – 7.8 metres iii) Right hand side – 3.20 metres iv) Material - Colorbond v) Height – 2.1 metres vi) Lattice – 0.2 metres

Looking for someone to install a 3.5m colourbond fence.

We are looking for a dark grey metal gate with vertical slats installed on the side of our house. Gate measurements are approximately 900mm wide x 1900mm tall. Please see images for exact measurements of space between house and fence.

I am looking for someone to supply and install 8m of glass pool fencing with gate. 3m of hooding will need to be done