Find experienced local fencing contractors in Camberwell VIC

Hi, I’m looking for someone to reinforce my backyard timber fence. There is currently a large tree behind the fence that the fence has been leaning against for support over time. The tree is scheduled to be removed soon, and I’m concerned the fence may become unstable once the tree is gone. I would like someone to: • Assess the current fence structure • Reinforce and stabilise it before the tree removal • Install additional posts or supports if required The fence is not fully broken, but I want to ensure it remains structurally sound after the tree is removed. Please bring your own tools and advise on any materials needed (happy to cover material costs separately). Location: Camberwell Flexible timing, ideally before the tree removal date.(20 Feb 2026)

We have a black aluminium pool fence that I would like to extend

One fence pillar was attached to a tree trunk. Due to bad weather, the tree fell and pulled the fence pillar out with it. The damaged pillar now needs to be removed and replaced. The job involves sourcing a new fence pillar with matching grooves to fit the existing concrete fence slabs, installing the new pillar securely, re-inserting the concrete slabs between the pillars, and painting the new pillar white to match the rest of the fence. The original supplier of the fence pillars is unknown, so the tasker will need to source a suitable matching pillar. I can assist on site if required. Material cost out of my pocket.

Fix/close the gap on one side of timber fence, as photo

Looking for a quote to remove and install new Paling fencing. Roughly 28meters.

Our side fence just blew down - it measures 10m long by about 1.5m high. I need help making safe and securing the side of our house. The access is very good - we are a corner block and the fence is on the side street side. There is the potential to quote for the full repair/replace when you get here - but for now I just need help getting the fence off the street and making it safe and secure. Thanks!!

Hi there need a side gate replaced. Height 1960× width 1085

Install new pool gate latch and remove old one. Includes two self-latching hinges.

I need someone to help.enrepair the lose fence poles

Part of our rear fence has fallen down It needs to be secured and repaired

We need to fix the fence for short term. Probably align it back to position or have something solid to keep it from falling. We are looking for affordable repair.

Need earthing of pool fence and side colourbond fence near to spa. Fence not yet installed. On a few weeks. But measure approx 3.7 m 3.2 m

Old white picket fence (10m total length) to be demolished/dismantled and disposed of. The concrete posts do not need to be removed. Can likely be dismantled in sections. Would be easy with a crow bar, electric saw, circular saw, etc. Care must be taken to ensure adjacent fence is not touched or damaged. All fence remnants and rubbish to be removed from site and disposed. **We will require painting to match colour on neighbour's side once fence removal is completed (looks like monument colour). This job is for picket fence removal & disposal only. Message me if you can paint the lattice fence also. Paint needs to be included in estimate for this additional piece of work.

Supply and install 19 metres of fencing

Build a single PowerPoint in the front yard to connect electric sliding gate motor. Conduit has in placed with rope. Around 10 meters length from garage to exit. Main switchboard is 1.4 meters away from the conduit . There is an existing PowerPoint 2 meters away from main switchboard. I will supply steel post and concrete. You supply other materials. You need to find solution to finish the job; you must have electrician license; You issue a compliance certificate when the job done.

Repost fence as it’s come out. The fence itself is okay however has come out during the winds

Job: Replace Fence & Build Retaining Wall (Approx. 16m) Looking for someone experienced to help with the following: 1. Remove and dispose of the existing leaning timber fence (approx. 16m) 2. Build a new fence, approx. 2.0m high (1.8m paling + 200mm plinth) 3. Install a 600mm high retaining wall beneath part of the fence (approx. 9.6m² area) Fence construction to include (based on a previous quote for reference): • 125x75 hardwood posts at 2.7m centres • Treated pine rails (75x50) • Treated pine palings (150x25, no gaps) • 50x200 double T/P sleepers • Concrete footings • Galvanized screw shank nails • One start post The retaining wall is necessary as the neighbouring ground is about 600mm higher than our side, and proper support is needed to prevent collapse. Please quote for full supply and installation (including demolition and disposal). Photos attached for reference. Let me know your availability and estimated completion time.

i got backyard fence need repair , its leaning back need to straighten it up . thanks

New build steel blade fence combined with brick render , height 1.2 meters, total length 15.4 meters, including letter box , electric sliding gate. measurement and design attached , please see photos. Note: build on incline field .

Please give me a quote including the lattice + installation. Would be nice if you can give me some options of lattice to select. Looking for 300mm height extension with about 7m length