Find experienced local fencing contractors in Pakenham

Looking to install a secure side gate between my house and existing Colorbond boundary fence. Will provide measurements soon and currently has no gate installed. It should include a latch/lock Please provide: • Quote including materials and labour • Experience with Colorbond fencing and gates • Availability Photos attached. Happy for an inspection if required.

Hi. I am looking for someone to replace my back fence with colourbond fencing. Its approx 6 to 8 Mts long. If anyone could give me a rough quote of approx $ I would really appreciate it. thanks.

The neighbour I share a backyard fence with has mounted his pergola on top of our shared fence and it looks terrible. I wanted to put some type of colour bond screening of fencing above the fence to be able make that part private so that we don’t see that clear sheet that he has put I was wondering if anyone may have any solutions. thanks for your time. happy to pay for the materials on top of course. thanks ☺️

Fence needs to be repair, 5 to 6 posts needs to be replaced .

Fence tilting cause the post is weak

Broken Fence need fixing.

Wind has knocked down rear house fence. Just need a temporary fix

My fence is shaking. Need to have it strengthened and some palings replaced. Need to visit and quote for the job.

Hi, I need sports netting put on one side of the fence, i have purchased it already, has 2 posts and 10m or netting. On the other side which is pictured i need a wire cable run along the top for it to be tightened, it may need to be taken down and put back up this needs tp be done on both side.ropfing screw used to connect posts to colourbond fence. I dont have the wire cable or the roofing screws, also needs the wire run along the top of both sides and then cable tied all the way arpund. so that needs to be included in the price. It will possible need to go higher too on both sides so its pulled tighter and also higher so the ball doesnt go over to the neighbours house.

The fence in between two houses is bending over one side. A person who does the fence work needs to come and fix it. And check the whole base line and in between holding bars.Only reasonably offers

Flat blade fence height is around 1.2-1.3M & needs to be reduced to below 1M or less within 9M of the intersection. Corner block. Please pass on quotation.

Looking for Fence / Sleeper Installer – Pakenham Need someone to install 6 galvanised steel H-posts next to an existing fence to hold concrete sleepers and protect the fence base. 📍 Location: Pakenham 🛠 Experience with concrete sleepers required 📅 Start: ASAP 💬 Please DM with price & availability

Need about 35 metres of timber fencing pulled does and removed and approx new 35 metres of colorbond fence installed

Need fence panels to go on top of the retaining wall walls. Have all the hardware onsite. Just need a good labor

Repair Leaning Timber Fence / Replace I need a handyman or fencing professional to fix a leaning timber fence in my backyard. As you can see in the photos, the fence has tilted significantly and looks like the posts have rotted or become loose. Work Required: • Inspect the fence and identify the problem (likely broken or rotten posts). • Replace 1–2 posts (or however many are needed) to straighten and secure the fence. • Re-attach the fence panels if required. • Ensure the fence is stable and upright. Details: • Easy access down the side of the house. • Please bring all tools and materials needed. • Located in Pakenham

Due to recent heavy wind gust. Some of the Colorbond fence is damaged as per the attached photos. I am looking for experienced fencing contractor who can fix this.

Need to bolt down aluminium fence and jumping castle

Garden wooden fence of approx 19.1m long and 1.8m with cap had given way at 3 sections of the fence. 1. need to demolish the fance 2. remove the old fence 3. install a new fence per the phots of 19.1m (approx) 1.8m High with cap using all new posts for fencing works are hardwood posts (not cypress pine posts) of 125mm x75mm, and 75mm x 50mm (recess fitted – three rail set up) and 4. remove the old fence and rubbish associated with the fence Photo Notes 1- first photo shows 3 segments with single post collopsed. The part behind the shed is the post shared by 3 houses is still standing. Nothice that after the 3 collapsed segment, remaining fence that is still standing 2- second photo show that after the 3 collapsed segment, the reamining segments have not fallen. While the corner post is still intact, it might need a bit of clean up to attach new fence to it.

Fix leaning fence as show in pictures

I want some railings installed on my existing rendered fence, in the same style as the attached image example