Find experienced local carpenters in Pascoe Vale South

We’ve recently moved into a new place and need adjustments made to two built-in cabinets: 1. Fridge Cabinet (Photo 1): • The fridge cannot slide fully into the built-in space because the top shelf/cabinet is obstructing it. • We need the cabinet modified so the fridge fits in properly. • This is not just a cutting job, the finish must look neat, flush, and professionally done (no rough/scruffy edges). 2. TV Cabinet (Photo 2): • The TV currently sits proud of the built-in unit. • We want the surrounding shelving/cabinet adjusted so that the TV sits flush and looks integrated. What we’re looking for: • Someone with cabinetry/joinery experience. • Ability to cut/adjust existing cabinetry and make it look like a built-in.

Moved into a new home and had to remove the kitchen cabinet above the fridge space to fit in my fridge. Now I’m needing to shorten the height of the kitchen cabinet (and cabinet doors) by about 8cm so that I can fit the cabinet back in (top of cabinet needs to sit flush with top of sideboards so the moulding can be put back on). Cabinet may need to be shortened partially from top and partially from bottom due to the mouldings on the doors. Cuts need to be precise due to the mouldings.

Wooden door, hinges and latch installed for under house access. Tasker will need to buy materials and have own tools and equipment. Cost of materials will be added to the final price. Job price is labour only

Have purchased a new oven, but it it too tall for existing cavity. Need a new shelf/drawer made in place to accommodate new oven.

Need stain on wooden desk to be removed / repaired. See photos attached.

Patch faded flooring by sanding the affected area lightly and applying a new coat of varnish. Scratches or damaged areas can be repaired by sanding out the damaged area, applying wood filler, and then sanding lightly before applying varnish.

Need help to design a new white cabinet for the kitchen area to replace the current one, which has a brownish color (as seen in the second photo). *Height: 2.52m *Width: 2.1m *Depth: 0.6m

Have three window frames that need to be sanded down, stained (light colour) and polished. Stain/polish can be provided also. Must have previous experience in sand/polishing.

Need some cabinets, benchtop and built in sink (I'll supply the sink) for laundry. Allow space for the washing machine. Small space. In Pascoe Vale South.

1) Remove the existing old carcass (450mm depth) and replace with 600mm depth cabinets. Sink already removed. 2) Extend wall cabinets to be higher. Keep carcass. Replace all doors. 3) Install new cabinets above the fridge 4) Install new void for dishwasher (no dishwasher currently) 5) Install new void for microwave (no microwave space currently) 6) Replace all doors and hardware (melamine for all) Sink, oven and fridge have already been removed. I will replace benchtop when finished. Job in Pascoe Vale South. Start asap. Thanks - Due date: Flexible - Due date: Flexible

Deck needs to be sanded back and then retained- would like the quote to include materials - Due date: Flexible

Sand and oil deck- repair if required in any section. 15 x 3 m approx. tasker to provide materials - water based oil preferred. - Due date: Before Saturday, November 25, 2023

I have instructions and materials to build a wooden compost bin. The wood may need to be cut down to fit specifications. - Due date: Flexible

Hi - I’m looking for a professional carpenter to install a stone bench on brackets on the exterior of my servery window and also install timber battens on my island bench - Due date: Before Friday, 10 February 2023

I need the skirting boards carefully removed from my powder room (1m x 2.3m) and also the 2 wooden strips at the entrance ways (to the powder room and laundry) to be carefully removed in the same way. The toilet and vanity are being removed on 21 Oct morning so it would be easier to remove the skirting boards after this. The strips are being removed so we can retile the floors. - Due date: Before Tuesday, 25 October 2022

Looking for a cabinet maker to build custom items. Please see attached photos for 4 rooms that require cabinets. Pascoe Vale South Site is available for measurements for quote. Job to be completed Aug/Sep

We move to a new place and realised our fridge is a tiny bit taller so it needs adjusting to fit. Carpenter or handyman to cut a kitchen cabinet to get fridge to fit inside. Refer to picture for details. If any questions please let me know

We have a cupboard where the vent has been moved to and now need flooring that can be easily lifted up and put back if needed.floor space and vent Floor area is Approximately 85cm x 60 cm but the round vent is approx 30 cm diameter in one corner taking up some space that the wood flooring needs to be cut around. I might have wood that can be used but please let me know if you can do it with all tools and material, - Due date: Before Sunday, 3 April 2022