Find experienced local carpenters in Melbourne City CBD

Seeking an experienced and professional installer for the pickup, delivery, and assembly of flat pack joinery for a retail store located in the Melbourne CBD. Responsibilities: Collection & Transport: Pick up flat pack components from Heidelberg West (van or ute required) and deliver to the Melbourne CBD site. Site Delivery & Handling: Carefully transport components into the store. Parking is available at the front of the site. Furniture Relocation (Pre-Assembly): Assist in moving existing furniture to accommodate new joinery. Joinery Assembly: Assemble two (2) cupboards: 500mm (W) x 500mm (D) x 500mm (H), 1 door each. Assemble fourteen (14) cupboards: 1000mm (W) x 500mm (D) x 500mm (H), 2 doors each. Includes all door mounting and adjustments for correct alignment. Includes kicker installation. Furniture Relocation (Post-Assembly): Assist in returning existing furniture to its original position. Requirements for Applicants: Demonstrable experience in flat pack joinery assembly, preferably in commercial/retail settings. Own professional tools suitable for joinery assembly. Reliable, with a high standard of workmanship and attention to detail. Access to a suitable vehicle (van or ute) for transport.

Just need a bulkhead to be made and installed in kitchen area, it will be approx 2.7 m long

Replace the door front finish

I have one cupboard in our office on which I need the old lock removed and a new one installed. I need two keys with the lock.

We need two joinery panels removed from old drawers and fitted together to create a single panel that can be installed on an integrated dishwasher.

We are in the process of fitting out a shop in Melbourne CBD - QV centre. We require some joiners/carpenters or handymen to assemble some furniture that has been shipped in from overseas, as well as to put up a few panels to cover some columns and add pegwalls to these. One of our pictures shows units to be assembled highlighted in green, and units to be made up - highlighted in yellow. For the units to be assembled - Generally base cabinets have been shipped who and the shelves on top need to be reassembled. All pieces are marked and all componenets given. Shouldn't be much harder than putting ikea furniture together. For units to be assemled - pretty straight forward - mostly just box out some columns with provided plywood and add some pegwalls from bunnings and frame them nicely. Plywood and accessories provided - except for the pegwalls which will need to be picked up. We are estimating from our past experience that it might be 2-3 days of work for a couple of guys - would prefer to work on hourly basis of approx $80 per man hour. If you work in group of 2 or 3 already that's perfect - otherwise we may hire 2 individual airtaskers to work together. I will also be there to help myself. We have more detailed plans available, however reached upload limit here. Start time Monday 20th or Tuesday 21st - next week.

I need new kitchen lighting as the old ones not working, there are two bulbs overlap within joinery as in the photo. Budget is only estimated.

We need a trade man who can fix the pull out pantry, bathroom door handle and the wardrobe door off track. - Due date: Before Sunday, 24 September 2023

Some hairline cracks and paint peeled off to be repaired. A small hole in joinery cupboard Tobe fill and repaired - Due date: Before Saturday, 4 March 2023

Need a frame made for an L-shaped counter for base cabinets to sit behind. Frame is approximately 2.3m x 2.3m, with one side being 22cm wide and another 10cm. Height is 1.1m high. It will need be sturdy as the frame will be topped with a slim piece of engineered stone (30cm wide and 2cm thick). Both sides of the frame to be covered in 18mm MDF. - Due date: Before Sunday, 12 March 2023

I need to replace a bathroom joinery mirror - approximate dimensions 800mmH×500mmW (frameless) - Due date: Before Friday, 17 February 2023

Build small joinery shelf 20-25cm off ground for electric oven to sit on Have organised electrician for oven install on Friday 3rd Feb, so need platform built before then. Space beneath oven can roughly match existing joinery/skirting, otherwise can also consider a drawer. - Due date: Before Friday, 3 February 2023

I recently purchased a queen sized gas lift bed. I had someone attend and put together my bed from Airtasker which he did a great job. However the previous owners didn’t provide all of the screws I don’t need the gas lift side of the bed as I don’t care for it. But the mattress sitting on it, isn’t the most secure, I’m looking for potentially a joiner to come in (or handy man) and make up a secure base / partial base to secure it long term. Not a complex job. Just need someone with the right knowledge and skills to do a quick fix on the bed itself. - Due date: Needs to be done on Monday, 1 August 2022

Hi there, We are installing a new oven and need a small joinery platform built to raise oven off floor (around 110mm high) and face on front finished similar to rest of existing kitchen. We are also installing a stovetop that is larger than our current one, so will need hole in stone benchtop cut a little larger to accomodate this. Please provide quote for these two tasks, Thank you Jack

office fit out project. need to supply and install melamine panel wall divisions Please contact us for more details. This is just a part of the project which is urgently need to be done. Then we can go to the stage 2 fit out. - Due date: Before Saturday, 15th Jan 2022

Quote to provide the following: Basic kitchen unit - supply and install, including: - Floor cabinet unit on 100 kicker - total 2.8LM, 600mm depth. Roughly 600mm to be dishwasher opening, 1200mm cupboard doors (as noted below), remainder open front. - 3 cupboard doors approx 400mm wide each - allow standard laminate colour. Soft close hinges, finger pull to top of doors. - Benchtop 20mm laminate allow a standard colour, with 40mm square edge. 600mm depth. Roughly 2.8LM at 600mm depth or 1.7m2 - End panels 20mm laminate allow standard laminate colour. 600mm x 900mm height - Allow cutout for overmount sink and some plumbing/electrical - Site measure - Shop drawing If done well, have more work on larger jobs - domestic and commercial. Need to know when you can measure, and your manufacture time also.