Find trusted awning repair experts in VIC

Handyman or someone with experience with awning needed to realigned and adjust this to the correct position as one side is tilted downword and its low on full extension. Probably lifting one side and tighting the bolts can realign again... please quote the job.

Want kings awning removed and new 270 degree awning installed.

Have a colourbond metal awning that needs to be screwed into a concrete wall. I have the screws need someone with the a drill to drill into the concrete.

Existing polycarbonate front door Awning/canopy replaced with corrugated metal roof sheets. Canopy spans from front door to garage wall, about 2.5m.

The awning has been damaged and does not retract. It's controlled by a motor and remote. The task is to work out how to retract the awning without causing any more damage to it and leave it in the closed position.

See images. Take down old 'awning' (I'll get rid of it) and put up new one..(it comes with a motorised unit). I'll deal with the electrics separately. Separately, a few minor tasks: 1. put up a small, simple blind in the kitchen. 2. put up a bracket for a vacuum holder 3. put up an address plate front of house. This is the awning, more or less - https://www.bunnings.com.au/instahut-retractable-folding-arm-awning-motorised-sunshade-4-5mx3m-grey-white_p1161177

Take down awning fabric.

Need an experienced handyman to install a retractable side awning at my front fence for privacy. The awning is 200 × 1200 cm and needs proper mounting.Scope:Install the end post (may require drilling into concrete)Ensure the awning pulls across smoothly and locks in placeLevel and align the unit so it operates cleanly. Bring all tools, including hammer drill, drill bits, fixings, and hardware

Detach the awning from my house and dispose. We are on ground level. Awning length is 5 metres.

Need this installed- someone handy with a drill and follow install instructions. See all pictures of parts included and how it looks. A local tradie in Cheltenham

Looking for an experienced trade painter to repaint the exterior architectural trims, gables, and fascias of a single-storey weatherboard home in Thornbury (see attached photos). Scope of Work: Front Facade: Paint front gable trims/battens, window awning/hood, timber window frames/sills, and lower plinth baseboards in a heritage muted olive green (per mockup image). Rear Facade: Paint rear roofline fascias, gable cladding/trims, window/sliding door perimeter trims, and lower baseboards. Side Laneway/Path: Paint metal/timber fascias, gutters, downpipes (changing over from burgundy), and lower baseboards along the side pathway. Prep Work: Light sanding, cleaning down surfaces, scraping loose paint, and spot priming where required. Materials & Requirements: Paint (Supplied by Painter): Painter to supply premium exterior acrylic paint (e.g., Dulux Weathershield or Taubmans All Weather) tinted to agreed olive/green trim colour (e.g., / Olive Leaf). Equipment: Painter to supply all brushes, rollers, masking, drop sheets, and ladders/step platforms. Access: Flat, clear ground access at front, rear, and side brick pathway. Please state your experience with exterior timber and metal trim painting and include links/photos of past work when submitting your offer.

Need a painter to paint over awning facia and sides. Colour is Monument. I think it would need two coats. Need it done on Sunday 16th August so not many cars and people about to get in the way. I think it's just a morning's work and the paint job only needs to last 2 months.

We have assembled a 3m x 2m manual awning bought from Bunnings, we just need help to drill holes in the brick and mount it Make ur best offer

Need an awing installed at rear of property

Looking for an experienced handyman or carpenter to install a Canopia Sophia awning (1.6m x 0.9m) over my rear door entrance. Awning materials & assembly instructions are supplied in kit. Will need to bring own tools & appropriate heavy duty timber screws, washers & weatherproof sealer. The awning will be attached to 50mm (approx) thick timber, which sits behind grey mini orb cladding. Happy for the awning brackets to be neatly pre-drilled and mounted using standard spacer sleeves/washers to keep the mini orb flat.

I need help lifting a motorized awning your job help me measure and helping installing the awning. I will provide all the tools

Our motorised folding arm awning is not retracting as it should, and we have been advised it’s likely because the motion sensor batteries need replacing. We require someone with a ladder and tools to locate the awning’s motion sensor/s and replace the batteries (3x AAA batteries, provided). Instructions included in the photos section. Would prefer someone with experience in servicing motorised awnings in case other repairs may be necessary.

I have a van with an awning but it’s too small so I bought a bigger one to install. I want to then move the smaller awning to another van i have. Both have roof racks to attach to

Metal fastening of external awnings loosened from brick wall

The awning window highlighted in yellow is what needs to be replaced to a fixed window. This is to stop the glass door getting smashed if the awning window is open and someone opens the door into it.