Hire a professional washing machine services in West London

Looking for someone experienced with washing machine repairs to replace the rubber door seal/gasket on my Bosch washing machine, as the existing seal has developed mould. Model: Bosch WAQ283S0GB/12 I will provide the replacement door seal. Looking for someone to remove the existing seal, fit the new one correctly and check that the machine is watertight afterwards. Ideally someone who has replaced Bosch washing machine door seals before. Based in Fulham. Thanks!

Had new washing machine delivered today when connecting they have seen a small leak at the connecting pipe which they say is from the connection not the pipe. Looks like the connector needs replacing and it’s a pushfit type connection

Hinge broken on the door covering the washing machine, change toilet seat cover and another small task

I need the door seal/gasket replaced on my Candy Smart Pro washing machine (model CSO14103TWCBE-80). A drawstring from a pair of shorts got trapped in the door and tore the seal. The machine works normally otherwise, but the seal now leaks. I have already purchased the correct replacement seal, so I just need it fitted.

Rubber seal to be replaced on washing machine

- Existing washing machine is still in position and hardwired - Supply is via a switched fused spur labelled “Washing Machine” above the worktop - Behind the machine is a white appliance flex outlet plate located centrally behind the appliance - New appliance is a Hisense washer dryer with a standard 13A plug I need: 1. Isolate and disconnect the old hardwired washing machine 2. Replace the existing flex outlet plate with a low\-profile 13A socket 3. Leave the socket ready for the new appliance installer to plug in the new machine

The rubber seal on my Samsung WD80TA046BE washer/dryer has ripped and it leaks when it is being used. I have the replacement seal, and would like somebody to fit it for me. The W/D is in a stack, underneath a tumble dryer, in an appliance cupboard. I assume the TD needs to be taken off and moved first, and then the W/D can be moved out of the cupboard to have the sides / top removed (I believe this is the only way the seal can be replaced). They are quite heavy so it may be a 2 person job.

Bosch serie 6 washing machine does not drain. Error 36-10 notification.

I bought a new washing machine and I need it installed. I tried to do it myself but I’m not strong enough to open cold water valve to attach the pipe

Bosch WIW washing machine showing E23 error. Have done the basic stuff like checking filters and tipping it up but the error prevails.

My washing machine stopped working and is broken now. I need someone to disconnect my current washing machine from my house, and then install a new washing machine. I have bought a new one, so I will need the new one to be brought in and set up.

A karcher water pressure washer stopped working maybe due to overheating after machine was mistakenly left on without water not connected

So I need a replacement rubber seal installed on my clothes washing machine. & there is a drip sound coming from the toilet bowl in the bathroom and it’s driving me insane!

We’ve just moved into a new house, and the old washing machine is due to be collected. The new washing machine is currently in the hallway. The apartment is on the first floor, and the machine is a heavy Miele. It will need to be brought in via the rear entrance and carried up the staircase. Please note that it will not fit through the kitchen, so that route cannot be used. Two person lift required. The apartment lift is old and not suitable.

*price is reflective of not needing disposal services* We need someone to disconnect and drain our washing machine ahead of our new one coming

Just need someone to fit/plug my mothers new washing machine in. You do not require to take away the old washing machine. We only need this new one to be installed.

There was a pipe issue above washing machine that caused water leaked. This has gotten fixed but since then everytime we plug the washing machine the whole house electricity falls.

My Indesit washing machine is stuck heating to boiling temperature regardless of which programme or temperature setting I select. I’ve tried switching programmes and it happens across the board, so I suspect it’s either the temperature selector switch, thermostat/NTC sensor, or a stuck heating relay on the control board. Looking for someone experienced with washing machine repairs to: • Diagnose the fault (dial/selector switch, thermostat, or PCB relay) • Source and fit the replacement part if needed • Test the machine runs a full cycle at the correct temperature afterwards Ideally someone with appliance repair experience and their own multimeter/tools.

Bosch Washing Machine - Clean the washing machine thoroughly. Check the filter, detergent drawer, seal, and hose connections. Make sure it is draining and operating properly. Advise if anything looks damaged, blocked, or incorrectly fitted. Type of clean: End of lease Number of bedrooms: None Number of bathrooms: None Equipment and supplies: Tasker must provide

new washing arrived there wasn't a proper drainage system so Currys could not install.