Find a professional heating and cooling technician in East London

The Problem: Hot water stopped working recently after a circuit trip Hot water runs for ~1 minute then goes lukewarm/cold System pressure is fine (topped up to 1.5 bar) ViewSmart controller is on and set to Comfort mode Heat meter shows good inlet temp (65°C) but poor output temp What I've Already Done: Checked and adjusted system pressure Confirmed KWF mode is set to Comfort Attempted power reset Likely Issues (to save you time): Based on troubleshooting, the problem is most likely: Failed/stuck PICV actuator (Item #2) - not opening properly after power cut Clogged Y-strainer on primary circuit (visible corrosion from an old leak present) Scaled/fouled plate heat exchanger What I Need: Gas Safe registered heating engineer with HIU/district heating experience Diagnosis and repair of the faulty component(s) Service/clean the corroded Y-strainer while accessing the system Test to ensure hot water is restored Access: Easy access to HIU in utility cupboard Flat is in a managed building with district heating Please include in your offer: Your experience with HIU systems (especially Evinox ModuSat) Estimated time to complete Whether parts (actuator, strainer seals) are included or extra Your Gas Safe registration number Looking for a professional who can get this sorted quickly. Happy to provide more photos or details if needed.

Hot water from the Ecodan works for water (shower, taps) but for some reason, no heating coming out of the underfloor heating. The pump flow looks like it is working. Room thermostats are working. But- pipes not hot, control system seems stuck on standby for calling heat from the boiler. Could be a need to replace or rewire the motorised valve actuator. Maybe be something to do with the boiler. Maybe something simpler and I’m being slow. Need a heat-pump heating engineer or plumber-electrician. Suggested price for call-out, first 1.5 hrs, diagnostic and simple fixes. Let me know if you can bring spares, and what additional costs may be. We will reconcile after.

My radiators are not working with my usual settings on the thermostat panel. The hot water and Towel rail are working very well. It might be a problem of boiler setting/connection.

Unable to make the smart thermostat for Tado work. Certain tech related errors - E0, E2 and E4. Need someone with a knowledge of smart devices

i think the element on our immersion heater has broken and we have no hot water. im looking for an electrician to take a look and repair ASAP. Please send quotes if available. thank you.

I’d like to have my conservatory insulated with plywood or plasterboard and insulation sheet where the window are so is going to keep more the warm in. It’s a 12m2 room

Need someone to install Hive thermostat. Conventional boiler. Two channel. Hive equipment on site. Must bring tools and complete the work neatly. Must have experience with Hive installation.

Relocation of Boiler 1 mtr away where it is and change require pipe work.

Having issues with my boiler it’s showing E133 error which is gas supply fault. I’ve fixed pressure but still getting errors

Had our bathroom and kitchen re-done 2 years ago and still have about four holes in our external brickwork from where the old pipes were, most quite small apart from the boiler flue hole. Just need someone with a long ladder and brickwork experience to come and fill the holes professionally for a clean and long lasting fix

Got my hive hub, receiver and thermostat. Boiler has an existing next connection, so this just needs replacing Boiler is a Vaillant eco tec plus

My combi boiler is not working - I have no hot water or heating. It’s tripping out my lights upstairs and my fuse box

Issue with central heating not turning on

The thermostat not working, screen all black. There's no batteries in it to be replaced. No problem with hot water.

Our boiler (Potterton Promax System HE) is not working and the pressure is gone. We've tried adjusting the valves but they seem to be stiff or maybe stuck. On the brass connection on the braided metal hose underneath there is water dripping out slowly.

Hi. I live in Walthamstow E17 8BX and need a mixer changing in our shower and our external boiler flue straightening as it is currently leaking. We have a new mixer so we only need it installing. Would you be able to let me know if you’d be free any time soon to come round and have a look at these, please? I’d like this done as soon as possible, as we’d have guests staying this weekend. Thanks

Floor heating in one of the rooms doesn't work while the others are fine.

Boiler leaking water - needs a service and leak fixing

Hello there, We need help replacing the radiator valve. The current radiator is constantly heating and won’t turn off, the valve seems to be stuck or faulty. It’s essential to stop the radiator from blasting heat, so this needs to be fixed as soon as possible. Please include your availability and offer on this task. Thanks, Victoria

Top heating element is stuck and wont unscrew i have tried but not moving, the tank has been drained down as far as the top element, only contact if you are 100%, you can remove, boiler is a pulsa coil model, drain valve also broke at the bottom, new elements are on site, if you can replace both that would be great