Hire trusted experts for dishwasher repairs in East London

The dishwasher and / or sink drain pipe is clogged by grease and food remains, causing the drain to become blocked. There is backflow (water coming back up to the sink). Methods like pouring hot water after mixing vinegar and soda, pumping with a pump into the sink can't solve the problem, but worsen the situation. It happened 2 days ago. The dishwasher is located next to the sink.

Need a standpipe installed

Hi, I’m looking for a qualified plumber to correctly connect my table-top dishwasher under the kitchen sink. At the moment: • The dishwasher water inlet hose is connected via the tap • The waste hose is too long and currently sits in the sink What I need: • Properly connect the dishwasher water supply to the same cold-water supply as the washing machine, using correct fittings • Tidy, shorten, or reroute the dishwasher waste hose and connect it neatly to the correct waste outlet under the sink • Ensure hoses are not under strain • Test the dishwasher and check for leaks Important notes: • Dishwasher and washing machine will remain in their current positions • Professional plumbing work only (no temporary or DIY solutions) • Happy for the plumber to supply any small fittings required • Please bring your own tools Dishwasher: electriQ XL Mini Table Top Dishwasher (Model EQDWTTXL) Photos of the current setup are attached. Budget: £50 Thank you.

We’ve had a new integrated dishwasher installed but because it’s an Ikea kitchen the cupboard door to go on it has to be attached using brackets and frame. Brackets and frame already here - they were used for the dishwasher that came before

Our dishwasher is not heating up, it still runs but we know the water isn’t getting hot as we have opened it mid run. This also means that the dishes are not dry when the cycle is finished and the dishwasher is not washing anything oily well. We suspect a faulty heating unit. Price indicated is labour only (we will pay for any parts required)

I need a door put back on an integrated dishwasher. Perhaps we need to put on longer screws.

dishwasher button is stuck. Needs disassembly - and possible replacement of PCB buttons

IKEA dishwasher has come away from IKEA kitchen and needs reattaching. Sealant in bathroom needs replacing (toilet, shower/ bath (just the one corner near shower head and where the bath attaches to the wall tiles). We have the sealant for this.

Cut to size door panel and attach to integrated dishwasher. It is an ikea cabinet

I had a leak from the dishwasher which went to the flat below which now I need to repaint but it's just one area of the kitchen ceiling not all of it. The new dishwasher came without the ability to install the sliding door, so we need to adapt the door to be fixed. The door is not a bit too long and need to be trimmed before attaching it to the dishwasher.

I need assistance with reattaching a dishwasher door panel. I believe we need longer screws put in. Please assist with reattaching the door with a permant fix.

1. Moving integrated fridge 2. Moving integrated washing machine to existing location of fridge and reconnecting it 3. Installation and connection of new freestanding dishwasher in existing location of washing machine 4. Cutting kitchen plinths to fit new placements

We could do with a few checks - the main issue today is a blocked dishwasher which we're unable to resolve ourselves, but we have a new leak in our bathroom sink as well. The dishwasher is the most pressing but we could do with some other basic checks and help as well.

Belling fitted dishwasher keeps showing an E4 error message – believe to be a small leak dripping into the base plate and triggering the flood sensor, as the water seems to be flushing through the pipes as it should otherwise.

change rubber seal of neff built in dishwasher

Dishwasher needs to be installed however side panel and cupboard will also need to be removed.

I need someone to inspect the area to ensure I can fit a dishwasher. Then, it will be removing a cupboard and possible side panel to fit it, and then to install the dishwasher

My dishwasher is causing the kitchen circuit breaker to trip. When the dishwasher is turned on, the circuit trips almost immediately. After switching off the dishwasher at the wall, the circuit breaker can be reset and works normally. This suggests there may be an electrical fault within the dishwasher (possibly heating element, wiring, or internal component). I need a qualified appliance technician or electrician to: • Diagnose the cause of the fault • Confirm whether it can be repaired safely • Provide repair if possible, or advise if replacement is required

The dishwasher starts but then makes a humming/buzzing sound and stops mid-cycle. The control panel shows a water/tap warning light, indicating a drainage or water flow issue. Likely causes are a blocked filter or drain pump, or debris stuck in the pump impeller. The filter and sump area may need removing and cleaning, and the drain pump checked for obstructions. Reset has been attempted but issue persists.

Put door/install integrated bosch dishwasher ,have got it in just dont have the torx 20 screwdriver