Hire a reliable appliance service in Surrey

I bought a new bbq called a Fire Pit and assembled it this summer and it has worked until this week now it has two issues: one a faulty door which needs fixing and two the attachment to the gas cylinder won’t properly fit now

Last night, I noticed a clicking sound coming from my washing machine. It is a Hoover H-Wash 300 LITE. The clicking noise wasn't coming from anything inside the drum. Random and continuous. This was accompanied by my dining room light flickering. I had to turn off the machine mid wash and I've pulled it out and unplugged it.

During a wash last night, I noticed there was a clicking sound coming from my washing machine. I can tell it's coming from the circuit board and not from anything moving around inside the machine. I also noticed that everytime this clicking noise happens, my dining room light flickered. I turned off the machine and unplugged it as a precautionary measure.

Looking for someone experienced with Sage coffee machine repairs to diagnose and repair a Sage Barista Express BES870 with a water-flow issue. The original pump was not operating, so I have fitted a brand new replacement pump, which now runs strongly, but the machine still only produces a very small amount of water from the group head, hot water outlet and steam wand.

Hotpoint Aquarius+ WDPG 8640 - Wash cycle has completed and door will not open. Have tried switching on and off, the emergency release pull-lever, a credit card, but nothing will work.

Hardwire dishwasher into mains

Our dishwasher was previously fixed to an exterior wooden cupboard door by screws which have now come loose. The dishwasher is spring loaded so without the front door it just slams shut so it is not properly usable at the moment and is ugly and exposed. We are unsure how to fix it back as it looks like the hole is unusable now and there are no other spaces for us to put more screws.

MAKITA DHS 680 circular saw not working. When I pull the trigger, the blades do not spin. The battery indicator on the machine do not lit up either but the battery is working good. The possible reason maybe when I tried to fit the circular saw in a guide rail adapter, I hammered the saw softly with a rubber mallet. I am not sure if this could be the reason. OR maybe because of the dust, I did not use vacuum while cutting the decking boards.

Need to install a Haier slimline dishwasher. It requires some carpentry as well since it needs to be installed from scratch..we may have to cut few boards to fit in the dishwasher...the empty shelf you see is where it needs to be fitted..the place is fractionally small and that is where we may have to remove boards from either the left or right....there is an electric socket on the slab..may be it also requires installing a socket..post code is TW16 5JY Plz share how much it would cost to get the work done..and the availability

coffee machine Beko is not producing espresso hot water working and spent some time troubleshooting spout is ok have descaled and unblocked those bits don’t need to take apart for

I have a new washing machine but the measurements are different to the old one so I need help attaching the door to the new machine. The current fixtures on the door are out of place so they need removing and the new ones added!

Recliner not going up or down electric

Chair not going up or down no green light on transformer electric chair

the grinder on my Delonghi Dinamica is not turning. I have cleaned it out so I do not think it is a stuck bean.

Knocking noise from shock absorber treadmill I have a life fitness T3 model

Dishwasher isn’t draining, filters have been cleaned, it’s an F12 error. It might be the pump so a I’d obviously pay separately for any parts needed

My Smeg washer dryer has a E05 error code. Looking online could be a drainage issue. Appliance is only 5 years old, so could be simple blockage

I have a Echelon Stride 6s and the the motor belt has snapped so need replaced (Generic brand) and serviced

Bosch serie 6 washing machine does not drain. Error 36-10 notification.

I need and expirenced tradesmen who can help me get this nut off the angle grinder.