Find a trusted local electrician in Brixton

I have an old flat with some areas missing plug sockets and some sockets badly installed (crooked)

Our electrician has unfortunately left the job unfinished, so we’re looking for someone to come in and complete the remaining work. The whole kitchen needs painting, including the ceiling. I’ve attached a photo showing how we’d like the finished kitchen to look. Once I find someone suitable, I’ll upload some photos of the kitchen’s current condition so you can see exactly what needs to be done. If you have any questions or need any more information, please feel free to ask.

Hello, I'm looking for a qualified electrician to replace an island kitchen hood/extractor fan.

Need 10 minutes of electronics soldering for LED strip - black and red strip have come loose from LED wire on back of LED bathroom mirror.

Emptying the bath last night tripped the electrics. The mains-powered smoke alarm would not switch off. There is not a separate fuse for the smoke alarm. We need to isolate the smoke alarm to prevent electric fire. Will also need a plumber to check for leaks.

Need an electrician to please replace my heat alarms (2) as they are beeping

I’m looking for a quote to inspect a shared electrical intake/meter cupboard. It includes multiple meters, service heads, fuse boards, and shared earthing. There’s a label showing inspection is overdue. I’d like: • Inspection + safety/compliance check • EICR (if applicable) Before proceeding, can you confirm: • You’re NICEIC/NAPIT approved (ideally Approved Contractor) • You have experience with communal/multi-occupancy supplies • You carry out EICRs on this type of setup • You have public liability insurance Thanks

**Description:** We’re looking for a qualified electrician to carry out some work in our flat before Friday (ahead of decorating). **Scope of work:** * Install 3 new plug sockets * 2 in a bedroom * 1 in a cupboard * Run cabling for 2 wall lights (sconces) above the bed (installation of fixtures not required at this stage, just wiring) **Timing:** Ideally completed before Friday **Location:** Flat next to Brixton O2 Academy **Additional details:** * Access is straightforward * Happy to discuss best positioning if needed * Please bring all necessary tools and advise if any materials are required **Requirements:** * Qualified and experienced electrician * Able to complete work safely and to standard Please get in touch with availability, a rough quote, and any questions. We don't have materials.

I have two lamps which need re-wiring with clear cables/switch.

Hang 3 items in my flat with an electric drill (I do not have a drill but have the screws needed)

7 ceiling light bulbs fixing Investigate a broken extractor fan :)

The switch turns on the light but the dimmer doesn’t work. Normally by turning it either left or right the lights gets brighter or darker.

Hi! 1. I have two ceiling lights that are out on extremely high ceilings and need to be replaced. *I’m not sure a tall enough ladder can fit up the stairs in my building. 2. The kitchen ceiling lights are dimmable lights that don’t seem to respond correctly to the dimmer and light switch. They struggle to turn on and don’t go to full light capacity. Would love to get these issues fixed!

We have a fairly tall kitchen ceiling (see photo). We need someone with a tall ladder to change 3 of the ceiling lights and also fit a smoke alarm battery.

My electrical cooker needs to be installed properly

Currently no socket in the bathroom. Need to install a shaver/toothbrush charger in the bathroom.

need a brand new electric cooker connected

The blind fell out from the holder in bloc blind (electric version)

H! Are you available for the fix of electric (motorolised) blinds by blocblinds? When we get the platform / tubus with the roller inside out of ceiling, unscrewed it to stick the white blind to the black, the roller was working and taking the blind. But when the platform is being hung on the top of window and we press the button at remote controller to roll it in back, the blind doesn’t come in. So it seems something is in the roller’s way when the platform is being hung, like squeezing the roller. Can you confirm you’re able to pick this task based in your experience with the motorolised / electric blinds? And if you’re available tomorrow 28/11 from 11:30 to 2:00 pm to come at SW2 5TA Or on 29/11 (Sat)

I have a 240 volt kiln which needs installing and connecting to the power in my residence. You will need to verify my power supply, ensure compliance, and properly connect. This has been done before at my precious address and I have disconnected to move