Find a reliable computer and IT professional in Central London

I have all the components

The following points: 1. Meet with BTB internet company at 12;30PM on Wednesday while they confirm the access points purchased are correct/compatible Internet - Ensure it is fully working and distributed around the property? THERE SHOULD BE ONE NETWORK WITH THE PASSWORD: Welcome1 2. Printer - Setup and ensure correct working functionality with the mac on the desk 3. Connection to the TVs - an apple TV is connected to each TV, and assume all streaming etc will go via these, and JUST MAKE SURE THE APPLE TV IS CONNECTED AND THAT THERE’S A Nord VPN installed. 4. Phone system - I’m there are regular landline phones, and also office style PBX phones, is there a PBX you expect to be able to connect to, or is it just ensure they have a dial tone and can make/receive calls? IT SHOULD MAKE/RECEIVE CALLS. Audio system - I notice ceiling speakers in the bathrooms, the small toilet next to the lounge, as well as the ensuite for the primary suite. I BELIEVE THERE IS SONOS, THAT SHOULD BE CONNECTED TO THE INTERNET Speakers in Primary suite on headboard - Not connected to anything? Do these need an amp and connection? SONOS TV in the primary ensuite (wall mounted mirror screen) - Does this want looking at? PLEASE CHECK ALL TVS 4. Clocks above the clothes store in the closet - To be changed to different time zones TIME ZONES - PST, EST, LONDON, PARIS ARE THE USUAL TIMEZONES 5. Computer setup on table - General wire tidy up? Could be helpful. 6. Nest thermostats factory default and reset these up with client details THIS SHOULD BE ACCESSED BY THE NEST APP AND THE UNIT CONNECTED TO THE INTERNET.

My PC needs a deep clean, from cpu cooler, to motherboard and gpu. It also needs new thermal paste. I need a full deep clean. Clean the inside of GPU too.

I have simple excel finance spreadsheet, I need help to added pictures and graphs , the model is already there , davis model and I have the product and everything, just need help with pictures and graphs

The CPU fan won’t spin and I have replaced it. A temporary solution was to take out the motherboard battery but now that won’t work. My pc used to randomly just restart mid game and now it just won’t turn on.

We need a brand new mac installed at our office

Assemble the following including setting up the required bios and amd expo: "AMD 9950X3D CPU be quiet! Silent Loop 3 420mm AIO CPU Cooler MSI MAG X870E TOMAHAWK WIFI Motherboard, ATX - Supports AMD Ryzen 9000/8000 / 7000 Processors, AM5-80A SPS VRM, DDR5 Memory Boost 8400+ MT/s (OC), PCIe 5.0 x16, M.2 Gen5, Wi-Fi 7, 5G LAN CORSAIR VENGEANCE 96GB (2x48GB) DDR5 DRAM 6000MT/s CL36 AMD EXPO & Intel XMP Memory Kit WD_BLACK SN850X NVMe SSD 4TB (Up to 7,300 MB/s read speed, Up to 6,600 MB/s write speed, M.2 2280, PCIe Gen4, Gaming Storage Expansion, High Performance Internal solid state drive) POWERED BY SANDISK ASUS ROG Astral GeForce RTX 5090 32GB GDDR7 WHITE OC Graphics Card New Sealed Lian Li V3000 PLUS ATX Full Tower Case Seasonic PX 1600 3.1 Noctua NF-A14x25 G2 PWM 91.6 CFM 140 mm Fan Noctua NF-A14x25 G2 PWM Sx2-PP 91.6 CFM 140 mm Fans 2-Pack Noctua NF-A14x25 G2 PWM Sx2-PP 91.6 CFM 140 mm Fans 2-Pack Noctua NF-A14x25 G2 PWM Sx2-PP 91.6 CFM 140 mm Fans 2-Pack "

2023 MacBook Pro 14 inch - screen has issue showing horizontal lines. Mac store has said needs screen replacement.

An Ethernet cable connecting our server scale and client scale (shop weighing scales connected to the internet for price updates and advertising) has been pulled out and damaged. As a result, the two scales can no longer communicate, although the general internet connection on site is working. The cable runs along the floor and appears to have been torn loose over time by equipment moving over it. The job involves repairing/reconnecting the Cat6 cable and possibly recovering a little more slack from underneath a meat display case. Some light handyman work may be required. No work at height or drilling needed — floor-level job only. Looking for someone confident with Ethernet cable repairs. I can provide the parts and a wire crimper if required as well as more information.

Job Title: Exterior Ethernet Cable Run (2nd Floor my room to Ground floor living room) Description: I need a 30m Cat 8 Ethernet cable installed from a 2nd-floor bedroom to the ground-floor living room via the exterior brickwork. The Task: (it’s not too difficult as it’s matter of threading an Ethernet cable) • Drilling: One hole (approx 16mm im not sure) through the 2nd-floor brick wall (inside-to-out) to pass a pre-terminated Ethernet head. • Routing: Run the cable down the exterior wall. It needs to be pinned neatly along mortar lines/corners using masonry clips (no dangling wires). • Ground Floor Entry: Feed the cable into the living room (ideally reusing the existing fiber entry point or drilling a small matching hole is better I assume). • Weatherproofing: Apply white silicone sealant to both holes and ensure a small "drip loop" if possible, is shaped at the entry points to prevent rain or such. Not sure. Need your opinion. Requirements: • Height: You will need an extension ladder to line up. • Tools: Must have a hammer drill and long masonry bits. I have the cable and the Titan drill if needed, but prefer you use your own pro bits or machine. Some cable clips for the brick wall would be needed. I have a 30m cable on the way. Should be sufficient. My roof has a slope so cable needs to be dangled down. I’ll help assist or such. Beneath my top window. There’s just brick so you can drill through

There is poor connection in our building. We need a router lifted out of the current room and moved to the office downstairs, to ensure that there is stronger connection. We need someone who is experienced in router positioning and improving connectivity.

Install Ethernet cable from main broadband router to other end of flat (internally along skirting etc). Distance from router to destination approx. 75 feet. Task cost excludes cost of cable.

I ordered PC parts that will arrive soon. I need someone to assemble the PC in my case and make sure everything works. Looking for a cheap price

Need to do a thorough check to my network and home office setup to ensure it’s safe and working properly

We’re relocating our office and need help setting up 33 desks/workstations. The monitors and PCs will be moved to the new floor, but we need someone to: Tasks include: Connect and set up all 33 monitors to the respective computers. Ensure all workstations are properly configured with the correct display settings. Connect peripherals (keyboard, mouse, docking stations, etc.) where needed. Set up network connections (wired or Wi‑Fi) for all 33 desks. Test that all workstations are fully functional at the end of the setup. Optional: basic cable management and tidy workstation layout. Requirements: Previous experience with multi-desk IT setup. Ability to work efficiently and carefully with office equipment. Own tools/cables preferred but can be provided if necessary.

Hi I’m looking for a favour - I have built an iOS app (I don’t know what I’m doing but am happy with where it’s at and am amazed I have got this far). I also have a developer account with Apple, I just need help getting the app off my laptop and on to the AppStore. It’s this hurdle I am stuck at and am hoping some kind sole will help me. I’m in the infancy of opening an agency for App development and hope that you could become a good contact for future paid work when the agency is in full swing. Thanks!

So my Ethernet cable head is broken so its loose. I need someone to splice it and put a new head on if thats possible

I’m looking for someone tech-savvy to help me set up a local AI model (such as LLaMA, Mistral, or Vicuna) on my Windows 11 Acer laptop. This AI will be used as a personal assistant/companion and should be able to accept custom prompts and chat history. Tasks include: Installing necessary software (Python, Llama.cpp, etc.) Downloading and installing the model (e.g., Mistral or Vicuna) Importing existing files (text logs, preferences, prompt history) Ensuring it works offline Backing it up (USB or cloud) Teaching me how to launch and use it This is time-sensitive. Need it done by Feb 8th, 2026

i just got a msi Cyborg 15 Gaming Laptop A13VF and it has currently has a 512gb ssd which is quite low, so im looking to upgrade it and put in a 4tb SSD. would also need the old SSD cloned onto the new one. ignore the budget amount, i need someone to tell me how much they charge to do it (i also need to know what ssd i have to get.)

The boiler is working but the thermostat is set to certain times and we need to change it to “on” all the time