Hire trusted appliance installation services near you

Cap off, disconnect and uninstall gas hob and install induction hob. Circuit for induction hob is already installed, so it just needs to be connected to it. There should be no need to alter worktop as hobs are same size Hob to install is Samsung NZ64H37070K

Install a smeg cooker extractor chimney hood There is already an opening in the brick wall and a plug, so cooker just needs to be mounted and wired to the electrics Smeg KATE600EX

there is an old electrical hob in my flat, I already purchased a new one on Amazon, I need someone who can install it for me and dispose of the old one.

I have an existing NEFF integrated microwave. This is hardwired into an isolator switch. I need this unit swapped out for the new NEFF microwave that I bought. I cannot do the electrics myself.

Install this cook hood www.ao.com/product/dfs067a51b-bosch-series-4-telescopic-cooker-hood-silver-85654-644.aspx at the place where the existing one is (photo).

I need a Bosch DWB66BC60B 60cm wall-mounted cooker hood installed in my kitchen in E1, London. The hood is 600 mm wide and requires a minimum clearance of 550 mm above an electric hob. There is already a switch labelled “cooker hood”, so I’d like the existing electrical supply checked and used if suitable. I’m happy for it to be installed as recirculating, unless external ducting is practical. Please include mounting, electrical connection, setup/testing, and let me know if any extra parts or filters are required.

I would like my hob and oven replaced. I have the new hob and oven so I’d like you to remove the old ones and install the new ones.

I have an induction oven, I need it installed to replace my old induction oven. The cable from my old oven can be used for the new one. I have recycling of the old one arranged. Looking for a qualified electrician please.

Install a new heater for the living room..not sure of what all parts you would need

Install a heater or radiator. Yet to decide which one I want

I need someone who is qualified to fit an electric cooker and remove and dispose of the old one properly

Install my electric heater today

We need help installing a wire-and-net divider across our outdoor football pitch at Beacon High School, N7. All materials have been supplied by the manufacturer (GS Products) — we need someone confident with a drill, hand tools, and basic cable/wire work to fit it correctly.

Height 84 cm width47cm depth 56cm

don't know anything about electrics so hopefully it can be installed like this

I’m looking for a qualified electrician to replace my existing hardwired ceramic hob with a new induction hob. Existing hob: Indesit RI 161 C ceramic hob (6.2 kW) New hob: Hisense Hi8 HI6443BSCWF 60cm induction hob (7.36 kW) The existing Indesit hob is hardwired into a dedicated cooker supply and will need to be safely disconnected and removed. The new Hisense Hi8 also needs to be hardwired, using the existing cooker circuit if it is suitable. Please check that the existing circuit, cable, protective device and isolation arrangement are appropriate for the new 7.36 kW induction hob before connection. The existing worktop cut-out should already be compatible (approximately 560 × 490 mm), so I am not expecting any worktop modification to be required. Scope: 1) Safely isolate and disconnect the existing hardwired Indesit hob 2) Remove the old hob from the worktop 3) Check suitability of the existing cooker circuit for the new 7.36 kW induction hob 4) Install and hardwire the Hisense Hi8 HI6443BSCWF 5) Secure the new hob correctly in the existing worktop aperture 6) Electrically test the installation and confirm safe operation 7) Dispose of the old hob as appropriate for electrical appliance if this is possible or alternatively, load into car for disposal at Raynesway Household Waste Recycling Centre, please let me know if disposal is included in your quote. Please quote for labour and any standard electrical connection materials required. If you anticipate that the existing circuit may require upgrading, please indicate how this would be assessed and any likely additional costs.

I need my new cooker hood installed in the kitchen

Electrician to install new Electric Cooker

Heya, I would like someone to install my new electrical cooker I have received today. I do not have any new parts or tools for it as it is a new built properly.

We have a robot lawnmower and the boundary wire is broken. I need you to reinstall a new heavy duty wire (you will need provide) and replicate the track that I’ve previously laid down. We have a worx lawnmower. The garden is roughly 30m x 30m so quite a long wire is needed with certain islands around trees etc