Hire trusted appliance installation services in West Midlands

Set up the electric cooker

Cooker hood installation.

I need a cooker hood to be installed.

I have a gas cooker but changing to an electric cooker in need the old cooker taking out and the new electric cooker installing. I believe the photo I have attached is the electric point for the cooker to be hardwired to a 32amp cooker socket

Install Bosch DWQ66DM50B 60cm chimney cooker hood with ducting. Location: B30 2LH. Remove old extractor hood. Install new Bosch DWQ66DM50B. Run 150mm rigid ducting vertically from hood outlet. Fit one 90° elbow. Run flat-profile 220×90mm ducting left to existing wall vent. Seal all duct joints for maximum airflow. Align hood perfectly level between cabinets. Fit chimney section neatly and cut to correct height. Test extraction and check for leaks. I will supply the hood You must be experienced with rigid ducting, cooker hood installation, and precise alignment between cabinets. Please provide your price, availability, and photos of previous cooker hood + ducting installs.

Install designer radiator.

I need someone to install my electric cooker—remove the wiring from the old one and connect it to the new one.

installing a electric oven

Kitchen extractor fan caught fire. Needs taking out and installing new extractor.

Electric Cooker Installation and safe gas cooker disconnection.

Install an electric fire in set in chimney

Washing machine is slightly leaking want to have it checked by professional please

Hi, I have a washing machine that needs new longer tubes to be attached to the back and secured on the tap. The old ones don’t reach the drain and tap. I don’t know how to do it myself and cannot get the pipe off in the back as it’s on too hard. I need someone strong and possibly with a big wrench in case it is stuck. If anyone is close by the B74 area who could come over anytime today or tomorrow quickly, I’d really appreciate it. I’d give you £20 cash for your service. :)

My electric cooker needs to be hardwired to be used I'm unsure on doing it myself

I need a washing machine installed at my home. This is just for fitting the washing machine itself, including connection to existing water supply, drainage, and electrics if required. The machine is already on site and ready to install.

Pull out old integrated dishwasher & connect original pipes to new one.

I just purchased a new dryer and i need someone who’s well versed to help me install it

There's a new washing machine and need someone to install it. The plumbing connections are already in place — it just needs connecting and testing. Please bring your own tools and have experience installing washing machines.

Hi , I am looking for a specialist to carry out a "ductless-to-ducted" kitchen conversion in my new-build Taylor Wimpey home this February. The current setup is a recirculating Electrolux hood. I am looking for a professional "one-stop" service to vent this externally to a high standard. Technical Requirements: • Diamond Core Drilling: A clean 155mm hole needs to be drilled through the external masonry (brick/cavity/block). This must be done with a diamond core drill (no hammer/chisel) to ensure no damage to the external brick face or internal plaster. • The Ducting: I require 150mm rigid round ducting to be installed through the wall (cut to size). Please do not use flexible foil/hose through the wall cavity as I want to remain compliant with NHBC Section 8.3 standards. • Airtight External Vent: I will be providing a Naber Flow Star GTS 150 (magnetic airtight system) or Luxair automatic airtight system.This needs to be fitted to the external brickwork and sealed with silicone. • Internal Connection: My existing Electrolux hood has a 150mm outlet. I need the rigid ducting connected to the hood motor and sealed using aluminum foil tape to ensure it is 100% airtight within the chimney piece. • Weatherproofing: The duct must be installed with a slight (1–2 degree) downward pitch toward the exterior to prevent condensation or rain ingress. Project Scope: • Location: Kitchen is on an external wall (back-to-back install). • Access: Side elevation of the property. • Timing: feb Could you please confirm: 1. Do you provide the diamond core drilling as part of your service? 2. Are you comfortable installing the Naber magnetic vent system or Luxair automatic vent system 3. What is your estimated lead time and cost for this specific installation? 4. Will you guarantee that my existing MVHR system will not be impacted by the vent and will be airtight I look forward to hearing from you. Kind regards, Anam

New oven was fitted as I’ve had my kitchen installed recently. After new oven was installed the main fuse box keeps tripping.