Find experienced local tradies in Sunshine Coast

A kings 270 degrees awning to be installed on a ute

Render block wall. Supply render and labour. Approx 3m x 2.4m minus the window. Ideally match existing render.

Block layer/ renderer required to build a block retaining wall. 6m long. 800mm high. 90 degree returns on both sides -4m long by 800-200mm high.

Hole in wall needs repairing

Crack running the length of the lounge room.

I recently bought a Kings RTT and Awning but wont have time to fit it. Have bought the mounting brackets and everything just need it fitted. Currently isnt mounted to my car but sitting on cardboard in the garage. Plenty of working space and easily accessible. Want it fitted to the left hand side of the tent (see photo)

The ceiling has sustained significant water damage due to a leak. I’m looking for a plasterer to remove the damaged section, replaster and repaint the affected area. The damaged area is approximately 2 m². The property is located in Aroona. I’m currently seeking quotes.

towel rail has been pulled out of a plasterboard wall, leaving a damaged/partially blown-out area and needing the towel rack re mounted. I need the plasterboard damage properly repaired and the existing towel rail secured but not simply screwed back into the same holes because it was never actually installed properly there was no timber or anything it was screwed into and very poor quality plastic anchor things. I am very picky and I need this done correctly. Please only make an offer if you can confidently get this job done with a flawless finish 💁🏼‍♀️ Ideally looking for someone experienced with plasterboard repairs and wall-mounted bathroom fixtures. If you have a brilliant idea on how to fix this without just chucking the screws back in the wall I’m open to hearing them. Happy to purchase and supply anything needed.

I need a small area plastered in the kitchen. It’s approx 60cm by 70cm. Unfortunately the newly installed Benchtop isn’t quite wide enough and there’s a bit of a gap, I’m hoping an experienced plaster can fix this issue. Plasterboard has already been added so it just needs plaster.

I have a 11x13cm hole needing repasted due to moving house and a knee going through the plaster wall. Dates are anytime between Friday 25-28 Sep 26 or prior to 25 Sep 26

Looking for someone to help tidy up the pillars around our outdoor patio area in Birtinya. At the moment the rendered pillars stop short of the roof, with the narrower metal posts continuing above them. We’d like to box out the top sections so the pillars look like they continue all the way up to the roof. I’ve attached a photo of how it looks now and a mock-up of roughly what we’d like to achieve. There are 4 pillars to do and we’d like the finished result rendered to match the existing house as closely as possible. We will paint and clear waste. Budget is just a placeholder as I don’t know what this should cost. Open to offers. Located in Birtinya.

Want to install a power point in living room and linen cupboard + fix a switch on a PowerPoint in bedroom and the switch on a 15amp plug in backyard (see images) Please make offer.

I have two large holes in my drywall that I need patching. It needs to look seamless as my new tiles won’t cover the whole area.

Two square metres of drywall to be replaced and painted in garage

To plasterboard around blueboard and continue match the pillar post

Plaster finish newly installed bulkhead. 3700x2400 size ceiling with a 3700x600 face return. Plaster and sand required. Job is in an office building in Buderim.

Handy person wanted for the following tasks: 1. Assemble 2 person sauna (on pallet) 2. Assemble queen bed (in box) 3. Hang double roller blind (in box) I’ll be helping since two set of hands are better than one (I’ll be your quasi trade assistant/apprentice), but I don’t have the skill set nor the tools to get this done on my own. I have budgeted 1 hour for the sauna set up and 1 hour for bed and blinds. Budgeted $70 per hour + $20 service fee. Required: Need to bring own tools Date: Sunday 19th July Location: Woombye

Renderer wanted, Tewantin Small job at a lowset home in Tewantin. Need 1 window sills knocked off and rendered back flush to match. Must include flashing and sealing at the window bases. Budget up to 300. Send a couple of examples of past work and your quote.

Looking to have some gyprock repaired on stairs where damage was caused from removal of previous floorboards.

Install aluminium balustrade inc. collection from Bunnings We need someone to collect and install an aluminium balustrade. Materials purchased by us upfront — you will not be out of pocket at any point. What you need to do: - Collect ProtectorAl aluminium fencing components from Bunnings (we will purchase and arrange) - Install on site: 2800mm straight run + 1000mm return at 90°, mounted to top of masonry wall (approx measurements). - 4 flanged posts dynabolted to masonry, 3 panel sections (2 panels cut to size between pickets) Tools required: hammer drill + 10mm masonry bit, angle grinder or hacksaw for cutting aluminium, level, basic hand tools. Materials: Purchased by us upfront Please check the photos before quoting.