Find experienced local tradies in Ryde

Required plasterer or handyman to fix damaged board around the ducted fan and restore it back to original condition.

I need a gyprocker to sand and paint the patched area. They need to be finished properly so they blend in seamlessly with the surrounding surface

Outside wall in pool area and other areas around garden beds that have been rendered need a refresh (patch some cracks etc) and repaint (ideally with mould proof paint suitable for outdoor rendered walls).

Install a gyprock wall & door to a open area. Currently an open rumpus room we would like to soundproof and close it off. Maybe put a window to let natural light in also. Approx 3m wide and 2.65 high. Plus Door, & small cut in an area into wall.

I need more power outlets at 2 different locations. I have checked stuffs with stud locator and both locations are free from any obstacles. The details are below. 1. Kitchen Cabinet: I need 1 x power outlet (2 x outlets in single body) in the kitchen cabinet. It shares a wall with NBN cabinet behind the wall and there's a power outlet in there. The wall is gyprock. 2. Kitchen Wall I need 2 x power outlets (4 x outlets in a single body or 2 x separate bodies) near the light switch. We can connect to power in the light switch or to the power outlet on the same wall in the same alignment but 1-1.2m below. The wall is gyprock. Please check out photos and let me know if you have questions.

Staircase handrail to gyprock and plaster.

See the pictures of docutments below.

Need experienced plasterer to prepare interior walls ready for painting. Scope of works: * Patch holes, cracks, dents and damaged areas * Skim coat / smooth uneven sections where needed * Sand walls to a paint-ready finish * Leave area clean and tidy after completion Materials: * I will supply all plastering materials Requirements: * Must have own tools and sanding equipment * Must have experience with wall prep and plaster repairs * Attention to detail for a smooth finish ready for painter Please provide: * Your experience * Availability * Estimated time to complete * Quote for labour only Location: Epping NSW

Hi, I have a double power point in my kitchen that is broken. Looking for a licensed electrician to replace it with a new double GPO. I am located in Epping (near Rawson St). Preferably looking for Alan T. if available! Thanks.

I need to install 1/2 extra powerpoints in my garage.

I need a very experienced renderer to render part of a front beam Scaffold is there and labourer if needed

Looking for an experienced handyman or renderer to repair minor cosmetic damage to exterior render on a granny flat wall. Damage was caused by an item leaning against the wall. The wall itself is solid — this is surface render cracking/compression only, not structural. Scope of work: • Remove loose/cracked render • Patch and re-render damaged section • Match existing texture as closely as possible • Paint/blend repaired area to match existing colour Details: • Small area (approx. window sill width) • Exterior ground-level access • No structural or brickwork issues • Photos attached

Need an electrician to install one power point in our family room on the wall.

The bathroom exhaust fan has detached and fallen from the ceiling, resulting in damage to the gyprock. Repairs to the ceiling are required, along with the proper reinstallation of the exhaust fan.

We have a house which is about to go up for sale. The garage had a damaged dual electrical socket which has since been re-placed to another position but the old socket now needs filling and smoothing off. Completely flexible of time/date just let me know what suits you best.

Hi, need the holes patched in ceiling, sanded and be ready for painting.

New spa getting delivered Need spa PowerPoint extended from already 15amp outside PowerPoint as new spa comes with only 2.5 meter power cable Need extra 4meter extended

Seeking an experienced tradesperson to remove an existing timber balustrade and supply & install a new timber balustrade (white finish paint). Must be secure, neat, and compliant with Australian standards. Existing framing (treated pine): Posts 900x900 mm Ends 900x450 mm Handrail 900x450 mm Lower rail 900x250 mm 📍 Beecroft NSW 2119 | Complete before 23 Jan 2026 Site visits can be arranged. Please see attached current photos of balustrade (damaged) that needs to be replaced and measurements.

I need a licensed electrician to install a double power point in my apartment. The purpose is to have: • One outlet dedicated to the fridge, and • One outlet for a modem / router Currently there is only a single power point in this location, and I would like it upgraded to a double power point for safety and proper usage. The job involves replacing the existing socket and ensuring the installation is compliant with Australian electrical standards. Please quote including labour and materials. Note apartment is an old one built in 1970s.

Small gyprock/plasterboard wall repair needed (minor hole/dent – see photo). Job includes: 1. Patch and repair the hole 2. Sand smooth 3.Paint touch-up to blend with existing wall colour Damage is very small. Finish needs to be neat and suitable for rental inspection. I’m happy to Supply matched paint from Bunnings, OR Have you source a small sample pot / colour match (please include in your offer)