

Find a professional hot water system contractor in Ryde
Fill in a short form and get free quotes for local hot water system contractors in Ryde
Great rating - 4.2/5 (11114+ reviews)
Looking for hot water system contractors?
- Gas system
- Electric systems
- Boilers
- … or anything else
Best rated hot water system installers near me

Latest Review
"This Plumber is very efficient,,so helpful and also very polite.We will definitely use him again for all our plumbing n..."
Verified Badges

ID Verified

NSW Plumbing Licence

NSW Gasfitting Licence

Mobile Verified

Latest Review
"Thanks for clearing the blockage"
Verified Badges

ID Verified

NSW Plumbing Licence

NSW Gasfitting Licence

Mobile Verified

Latest Review
"Great service awesome job"
Verified Badges

ID Verified

NSW Plumbing Licence

NSW Gasfitting Licence

Mobile Verified
Latest Review
"Azizuddin gave exceptional service. He was efficient, extremely polite and knew what he was doing. "
Verified Badges

ID Verified

Mobile Verified



Latest Review
"Professional and efficient! Highly recommend!"
Verified Badges

ID Verified

NSW Plumbing Licence

NSW Gasfitting Licence

Mobile Verified

Latest Review
"Amazing work!! Highly recommended Was very fast with communication and took pride in his work Thankyou again mate"
Verified Badges

ID Verified

Mobile Verified
Recent Hot Water System Installation & Repair reviews in Ryde
Promptly attended thanks. Polite and professional. Thanks Dean
Intermittent LOW hot water pressure
$150
Really good service from Abbas. He was prompt and efficient with helping us to install the washing machine, and even to clean up. Thank you!
Install hot water inlet for washing machine and drill waste pipe
$50
Abdul and Zac were right on time for the appointment and proved to be very reliable, friendly and professional knowing exactly what needs to be done in each situation. Did an excellent job, highly recommended !!!!!!
Check and Repair hot water system and supply
$100
Friendly and awesomely great work. Thanks so much!!
Replace leaking hot water pressure regulator valve
$250
Very promp, efficient, willing to check into a small unrelated query. Overall great service.
Replace non return isolation valve on the inlet of a hot water system
$100
Really friendly, punctual and reliable. Highly recommend.
Water leak from electric hot water tank
$150
What's the average cost of a hot water system installer in Ryde
$100 - $300
low
$100
median
$175
high
$300
Average reviews for Hot Water System Installation & Repair Services in Ryde
based on 30 reviews
4.93
What is Airtasker?

Post your task
Tell us what you need, it's FREE to post.

Review offers
Get offers from trusted Taskers and view profiles.

Get it done
Choose the right person for your task and get it done.
41+
Tasks successfully completed
5
Average amount of offers per task
2
mins
Average time to receive offers
Statistics from the most recent tasks on Airtasker over the last 3 years.
Related Services near me
Top Locations
Sunshine Coast Hot Water System Installation & Repair
Adelaide Hot Water System Installation & Repair
Perth Hot Water System Installation & Repair
Hobart Hot Water System Installation & Repair
Central Coast Hot Water System Installation & Repair
Newcastle Hot Water System Installation & Repair
Sydney Hot Water System Installation & Repair
Parramatta Hot Water System Installation & Repair
Ballarat Hot Water System Installation & Repair
Geelong Hot Water System Installation & Repair
Melbourne Hot Water System Installation & Repair
Canberra Hot Water System Installation & Repair
Brisbane Hot Water System Installation & Repair
Gold Coast Hot Water System Installation & Repair
What do hot water system installation services include?
Hot water system installation services include all the activities necessary to put a reliable, safe hot water system in your home. This involves installing an unvented hot water system, inspecting the installation area, preparing materials, installing the cylinder or tank, then making the needed connections. After the installation, your plumber can test the system for flaws and address them as needed.
Inspecting installation area
Your water heater installation begins with a thorough inspection of the spot that will house the tank and its components. Your plumber makes sure that the floor is robust enough to support the cylinder's weight and complies with established building codes and safety rules and regulations. If the allotted space is deemed insufficient for the cylinder, your plumber can help you look for an alternative spot for the unvented cylinder service.
Preparing for installation
Your plumber makes the necessary preparations for the hot water cylinder installation. If necessary, some plumbers may offer to make an improvised platform of sturdy materials to support the tank's weight. Otherwise, you can hire a Tasker to handle all your carpentry needs.
When appropriate, your hired plumber shuts off the power, gas, and water supply before starting the job. They can take all the necessary measurements to determine the right amount of materials, then cuts and bends wires and pipes to the appropriate lengths and widths. Your plumber may also cut holes into walls or floors as needed to allow pipes or wires to run through.
Installing the cylinder
Once the cylinder's space is ready, your plumber can proceed with the unvented hot water cylinder installation. They can place the cylinder or tank onto its designated space and position. Your plumber takes care not to damage any of the components of the vented hot water cylinder or other pipes and wires in its surroundings.
Installing components and pipes
After the cylinder is in position, your specialist proceeds with attaching the appropriate pipes, wires and components like the Temperature and Pressure Release valve, expansion vessel, immersion heater, and any other pipes and valves. As with all other stages of the unvented cylinder installation, they use appropriate materials and techniques that are compliant with state safety and building regulations and industry best practices.
Testing the system
Your hired plumber tests the system after completing the installation. They check that each tap and shower head provides hot water on demand and flows with consistent pressure. Should variations in temperature or pressure arise, your plumber can troubleshoot the system and do the appropriate fixes.
They repeat this process until the hot water system works without any issues. And now that your home has hot water running through your taps, tubs, and showers, why not ensure greater warmth and comfort in every room of your home? On Airtasker, you can also hire an insulation installer who can help you cut down on bills and achieve year-round comfort.
Recent Hot Water System Installation & Repair tasks in Ryde
Hot water tank/system fix
$200
Beecroft NSW, 澳大利亚
5th Jun 2026
plumber needed for leaking Dux ProFlo electric hot water system. We suddenly have no hot water and water is leaking from the top/inlet area of the tank. The unit is an electric storage water heater, around 315/321L, manufactured in 2013. Power has been turned off. Need someone to inspect ASAP and advise whether it can be repaired or needs replacement. Please include your fee and availability. Thanks
Urgent — Hot water system inspection & quote, Macquarie Park
$100
Macquarie Park, New South Wales
29th Apr 2026
Urgent — Hot water system inspection & quote, Macquarie Park My rental property in Macquarie Park has a burst hot water system that needs urgent attention. The unit is a Vulcan 80L mains pressure electric storage heater, approximately 93cm tall x 47cm diameter, believed to be circa 2003. I need a licensed plumber to: Inspect and confirm the fault (tank failure vs. valve/fitting issue) Advise whether repair or full replacement is required Provide an upfront quote on the spot for both options if applicable — including supply and installation of a comparable 80L electric replacement if needed Please note the unit is located inside the property, so access coordination with the tenant will be required. Happy to arrange access promptly given the urgency. Full replacement job to be quoted separately — please indicate your estimated replacement cost range when applying so I can shortlist accordingly.
Electric Hot Water System Not Heating – (Rheem 315L) Element faulty??
$200
Marsfield NSW 2122, Australia
30th Mar 2026
- Power supply is confirmed ON (no tripped breaker) - Tank is full (pressure relief valve tested) - No visible leaks - Thermal cut-out had tripped and was reset (clicked), but system still does not heat - No further reset click now - Issue started after a temporary water supply outage (possible element overheating/damage) I am seeking a qualified plumber or electrician to: - Diagnose the issue - Test heating element and thermostat - Replace heating element and/or thermostat as required Please include: - Your experience with electric storage hot water systems - Whether you can supply parts - Estimated total cost (labour + parts) Flexible with timing but prefer earlier rather than later :)
Outstanding. Communicated well (both SMS and phone calls) and arrived ontime as scheduled. Promptly identified the issue and rectified.
Fix hot water pressure in shower that decreases
$100
Hunters Hill, New South Wales
26th Mar 2026
The hot water pressure in the shower is ok when you turn it on, but the longer you run it, the pressure decreases. Its ok when you turn the cold water on with it but need the pressure fixed. The sinks seem ok with the hot water…. There are two hot water tanks (one upstairs and one downstairs. The smaller one is for downstairs. I cant seem to post the videos! Maybe i can post it when you comment? Thanks
Great customer service. Damien was actually there a lot earlier than expected and he was super nice and friendly and patient and knew what the issue was straight away. Appreciate Ben’s communication too. Whilst everyone was saying i needed to replace the water tank, it wasnt the case. Glad i wasnt ripped off and Damien was chill and a quick and efficient worker. Thanks everyone!
Solahart runs out of hot water quickly
$200
Ryde NSW, Australia
19th Mar 2026
I have a solahart which is 10 years or more old. And the thermostat has been replaces only 2 years ago. And we are still running out of hot water frequently and this is upstairs only. Especially in winter and cloudy daya
We recently used Diego and he is a hot water specialist which is very hard to find!! and couldn’t be happier with the service. From the first call, he was professional, responsive, and genuinely helpful. He arrived on time, quickly diagnosed the issue, and explained everything clearly without any pressure or upselling.
Relocating an electrical Rheem hot water system
$450
North Ryde NSW, Australia
29th Jan 2026
I’m seeking a to relocate an electrical Rheem hot water system between two houses in North Ryde that are approximately 1 km apart. Scope of work would include: Disconnection of the system Safe capping/sealing of water and electrical connections Removal and transport to the second property No reconnection required at the destination Access at both properties is straightforward.
Great customer service and great communication
Plumber needed tonight, no hot water
$250
North Ryde NSW, Australia
12th Jan 2026
Hi, AGL has confirmed the gas supply is active and the hot water system should be working, however we currently have no hot water. Need a licensed plumber to attend tonight to inspect the hot water system and diagnose the issue. Repair if possible on the night, otherwise advise on next steps.
Very easy to work with, super friendly
Hot water tank pipe leaking
$200
Marsfield NSW 2122, Australia
8th Jan 2026
Hot water tank pipe leaking
Kiosk hot water system for handwash
$500
Macquarie Park NSW, Australia
20th Dec 2025
Temporary hot water system for handwash with two cans - one for good water and another one for used water
Replace gas hot water
$10
Ryde NSW, Australia
9th Dec 2025
Please see picture. I live in a unit which iam the owner and the internal gas hot water seems to have died doesn’t turn on or clicks when turning the hot water on. But hard pressing the power on button the lcd comes on and says “FO” which google says stands for flame out. Please provide supply and install for new system or if the current one can be fixed or not which I doubt but you guys are the pro. Needs to be licenced and insured
Plumber - fix laundry tap (hot water) that won’t turn off
$200
Beecroft NSW, Australia
11th Oct 2025
Our hot water tap in the laundry won’t turn off.
Thanks so much for taking care of us!!! Looking forward to having you back soon!
Moving washing machine pipe from hot water tap to cold water tap
$20
Gladesville NSW, Australia
2nd Oct 2025
My hot water tank is being replaced and the washing machine was originally connected to the hot water tap. I need it shifted to the cold water tap.
Jeremiah was efficient, pleasant and did a great job! Highly recommended
Hot water system troubleshooting
$150
Beecroft NSW, Australia
1st Oct 2025
I need someone to troubleshoot an issue with our electric storage hot water system today in Beecroft. We have just moved into a new house. When we turn on the hot water in the shower, it works fine for about 30 seconds, then the pressure slowly reduces and goes down to almost nothing after about a minute. I think it must be something like a crimped hose along the line or a clogged filter somewhere, but I don’t have the expertise to fix it myself.
Diego was punctual, helpful and showed patience and initiative. Thank you Diego!
Rheem Hot water system repair
$100
Epping NSW, Australia
27th Jul 2025
Rheem hot water tank system is not working. Runs on gas. No hot water coming.
Mehmet came on time, helped me understand the problem and provided an effective solution. Look forward to working with you
Replace hot water tempering valve
$300
Macquarie Park, New South Wales
21st Jul 2025
There are two showers. We can only use one shower at the same time. Possible the blockage of tempering valve. Could be other issue. Has to be a licensed plumber. May refer more jobs later.
Easy to communicate and very patient to answer all the questions
Move my empty hot water
$100
West Pennant Hills NSW, Australia
13th Jul 2025
Move my empty hot water from my side house to front . 20 m
I am not hesitant to recommend him. He can do it.
Plumber - Hot Water Inspection & Tap Washers
$60
West Ryde NSW, Australia
13th Jul 2025
I need a professional to inspect my hot water system. Located in an apartment laundry room. There have been no issues with hot water supply, but we recently moved here and don't know about its maintenance history. Occasionally makes odd noises. Also to replace the washers and o-rings in two sets of taps.
Quote to see if can put in a larger hot water system in an apartment
$50
West Ryde NSW, Australia
9th Jul 2025
I currently have a small hot water system and want to see if it’s possible to change it/ change its location.
Punctual, lots of clear explanation and feedback for the job that was required.
Hot water heater replacement
$400
West Pennant Hills, New South Wales
9th Jun 2025
this Midea 190RDN3 needsto be replaced. it is currently installed in the backyard, with easy access to a driveway. needs a quote for a new unit.
Plumbing. Hot water flow on basin reducing to a trickle
$100
Epping NSW, Australia
1st Jun 2025
The hot water had reduced to a low flow and sometimes no hot water at all even when turned full. This is the bathroom washbasin
Chris was a good guy and ontime








