A white van parked on a street, with a person standing next to it, ready to load or unload items.
A white van parked on a street, with a person standing next to it, ready to load or unload items.

Find a professional hot water system contractor in Parramatta

Fill in a short form and get free quotes for local hot water system contractors in Parramatta

4.5

Excellent rating - 4.5/5 (9200+ reviews)

Looking for hot water system contractors?

  • Gas system
  • Electric systems
  • Boilers
  • … or anything else
It only takes 2 minutes. And it's free.
Up to 50% cheaper than franchise dealers
No job too big or small
Free insurance coverage
Secure cashless payments
Same day or next day service at no extra cost

Best rated hot water system installers near me

Recent Hot Water System Installation & Repair reviews in Parramatta

Thanks a lot Ethan.

Hot water tank leak repair

$100

Thanks Johnny

Plumber hot water not coming

$80

Thank youuu !

Need Hot Water Pressure Increased bath+shower

$250

Bill came on time, completed the job well, honest and hard working guy. Would highly recommend and use again. Thanks for your help

Supply and Install 135l Gas Hot Water System

$100

Johnny is very efficient! Thank you!

Leaking hot water system

$5

Thank you Kevin. It's very good service with reasonable cost. Strongly recommend for those who really needs a proof of service.

Replace T&P relief hot water system valve

$100

What's the average cost of a hot water system installer in Parramatta

$104 - $210

low

$104

median

$150

high

$210

Low, median and high bar chart distribuiton

Average reviews for Hot Water System Installation & Repair Services in Parramatta

based on 60 reviews

4.87

55
4
0
0
1

What is Airtasker?

Post your task

Post your task

Tell us what you need, it's FREE to post.

Review offers

Review offers

Get offers from trusted Taskers and view profiles.

Get it done

Get it done

Choose the right person for your task and get it done.

Now Available
  • Get it done now. Pay later.
  • Repay in 4 fortnightly instalments
  • No interest
  • Available on payments up to $1,500

What do hot water system installation services include?

Hot water system installation services include all the activities necessary to put a reliable, safe hot water system in your home. This involves installing an unvented hot water system, inspecting the installation area, preparing materials, installing the cylinder or tank, then making the needed connections. After the installation, your plumber can test the system for flaws and address them as needed.

Inspecting installation area

Your water heater installation begins with a thorough inspection of the spot that will house the tank and its components. Your plumber makes sure that the floor is robust enough to support the cylinder's weight and complies with established building codes and safety rules and regulations. If the allotted space is deemed insufficient for the cylinder, your plumber can help you look for an alternative spot for the unvented cylinder service. 

Preparing for installation 

Your plumber makes the necessary preparations for the hot water cylinder installation. If necessary, some plumbers may offer to make an improvised platform of sturdy materials to support the tank's weight. Otherwise, you can hire a Tasker to handle all your carpentry needs.

When appropriate, your hired plumber shuts off the power, gas, and water supply before starting the job. They can take all the necessary measurements to determine the right amount of materials, then cuts and bends wires and pipes to the appropriate lengths and widths. Your plumber may also cut holes into walls or floors as needed to allow pipes or wires to run through.

Installing the cylinder

Once the cylinder's space is ready, your plumber can proceed with the unvented hot water cylinder installation. They can place the cylinder or tank onto its designated space and position. Your plumber takes care not to damage any of the components of the vented hot water cylinder or other pipes and wires in its surroundings.

Installing components and pipes

After the cylinder is in position, your specialist proceeds with attaching the appropriate pipes, wires and components like the Temperature and Pressure Release valve, expansion vessel, immersion heater, and any other pipes and valves. As with all other stages of the unvented cylinder installation, they use appropriate materials and techniques that are compliant with state safety and building regulations and industry best practices. 

Testing the system

Your hired plumber tests the system after completing the installation. They check that each tap and shower head provides hot water on demand and flows with consistent pressure. Should variations in temperature or pressure arise, your plumber can troubleshoot the system and do the appropriate fixes. 

They repeat this process until the hot water system works without any issues. And now that your home has hot water running through your taps, tubs, and showers, why not ensure greater warmth and comfort in every room of your home? On Airtasker, you can also hire an insulation installer who can help you cut down on bills and achieve year-round comfort.

Recent Hot Water System Installation & Repair tasks in Parramatta

Replace electric hot water system

$1,500

Girraween NSW, Australia

16th Jul 2024

Electric hot water system ( Proflo brand) is not working I would like to repair first else replace with brand new

Hi! Any one can fix our shower hot water is not coming?

$80

Auburn NSW, Australia

11th Jul 2024

Our shower is not working it needs to be fixed. Hot water is not working. Thank you

Fix water hammer issue from hot water system

$100

Carlingford NSW 2118, Australia

7th Jul 2024

require licensed plumber to check my water hammer issue, happens only when I turn off hot water mixer taps and showers, had a pressure limiting valve installed at mains earlier in the year as my pressure was too high, but during this winter the hot water pipes have a hammer noise occurring, maybe need a expansion tank at the hot water system or secure loose pipes, have a hammer arrestor on one of the mixers, it doesn't help, have did the mains water off and to turn on all the taps to let the pressure out and turn water mains on, does not fix the issue, will require someone to check piping in walls roofing to the hot water system and resolve the issue

great work fixing my water hammer issue, installed an arrestor at my hot water system and corrected the arrestor on my mixer, thanks, highly recommend Giovanni

Remove peak for hot water system

$50

Merrylands West NSW, Australia

1st Jul 2024

Need the peak removed for my hot water system , contacted origin and they said I need an electrician to do it , our hot water system shuts down quickly with the peak being on

Got my job sorted all within no time Champion !

Hot water pipe leak

$101

Parramatta NSW 2150, Australia

28th Jun 2024

Leak in the copper pipes. Require licensed plumber.

He was amazing. Thankyou 😊

Fix Solar hot water system

$150

Northmead NSW 2152, Australia

27th Jun 2024

Solar hot water system keeps turning off at the main switch board. Need an electrician.

We don't have hot water for 2 days

$50

Silverwater NSW, Australia

23rd Jun 2024

We don't have hot water for the past 2 days. I need urgently someone to check the water heater or the reason behind this.

Replace the electric hot water container

$1,150

Auburn NSW, Australia

17th Jun 2024

Remove the old electric hot water system, install the new 50 liters hot water container includes part and labor

He did a good job!

Rheem hot water system replacement

$2,000

Toongabbie NSW, Australia

17th Jun 2024

Rheem hot water system replacement

Fix hot water system

$60

Toongabbie NSW, Australia

16th Jun 2024

Water not heating up. Usually turning it off and back on fixes it. I can hear the machine reboot, but water still not heating up. I believe a fuse must have blown and needs to be replaced. Neighbors with the same model replaced the fuse to fix it.

Hot water leaking under the kitchen sink

$200

Wentworthville NSW 2145, Australia

15th Jun 2024

Hot water leaking under the kitchen sink and behind the walls.

Great job, thanks Chris.

Inspect and potentially replace hot water tempering valve

$350

Wentworth Point NSW, Australia

15th Jun 2024

The hot water from all taps around my home is lukewarm. The building manager tried to adjust the hot water from outside, but said it was likely a faulty tempering valve. Could I please get someone (who is licensed and insured) to inspect and potentially adjust/replace the tempering valve? The number on the blue cap says "LD 23064 AD4032.2 TV15"

Fix my Hot Water System

$200

Greystanes NSW, Australia

10th Jun 2024

My Hot Water System doesn't go above tepid, even with the cold water completely off

Very professional and efficient

Change relieve valve of electric hot water system to prevent leaking

$50

Girraween NSW, Australia

9th Jun 2024

Excessive water is leaking out of the relief valve of our hot water system outdoors. Need the valve changed most likely. Need done urgently.

Install Hydrotherm hot water pump with government rebate

$500

Girraween NSW, Australia

9th Jun 2024

Replace our current hot water tank with Hydrotherm hot water pump which government is currently giving rebate on. Need urgently before 19 June 2024.

Remove 2x hot water panels

$80

Lidcombe NSW, Australia

22nd May 2024

Panels are on the ground, just need them taken away. Only 2x panels. Not all the panels in the photo.

No hot water to part of the home

$500

Girraween NSW, Australia

14th May 2024

Warm hot water to kitchen and bathroom next to kitchen. But good hot water in another bathroom.

Hot water installation

$350

Lidcombe NSW 2141, Australia

1st Apr 2024

Hi all. I need help to reconnect a small 47L hot water system which I had it removed during the kitchen work. The power and the pipe are in position.

Excellent work. Highly recommend.

Hot water system diagnosis and repair

$220

Guildford NSW, Australia

23rd Mar 2024

My gas hot water boiler suddenly stopped working. No idea why. I tried turning it back on as per manual but the pilot light wont light up. Need a plumber or gas professional to check what is going on. Job is to come and diagnose problem and let me know what repairs are needed (or if replacement is needed).

Good communication and professional

Disconnect hot water

$180

Lidcombe NSW 2141, Australia

1st Mar 2024

I am doing a kitchen Reno and need help to disconnect the hot water system under the cabinet. Location is Lidcombe. Please let me know if you can help.

Great work. Highly recommended.