A white van parked on a street, with a person standing next to it, ready to load or unload items.
A white van parked on a street, with a person standing next to it, ready to load or unload items.

Find a professional hot water system contractor in Adelaide

Fill in a short form and get free quotes for local hot water system contractors in Adelaide

4.5

Excellent rating - 4.5/5 (9200+ reviews)

Looking for hot water system contractors?

  • Gas system
  • Electric systems
  • Boilers
  • … or anything else
It only takes 2 minutes. And it's free.
Up to 50% cheaper than franchise dealers
No job too big or small
Free insurance coverage
Secure cashless payments
Same day or next day service at no extra cost

Best rated hot water system installers near me

Recent Hot Water System Installation & Repair reviews in Adelaide

Jack was fantastic. Did a great job. Would definitely recommend him

Roof plumber to remove solar hot water service

$500

Russell did an exceptional job with the replacement and installation of a 50L Hot Water System for my business. Highly Recommend.

Replace 50L hot water system

$350

Great job thanks

Change pressure valve on hot water system

$50

Well done and on time

Ceiling fan and PowerPoint for hot water unit

$200

great job completed quickly knew exactly what the problem was

Hot water not working in kitchen. mixer tap

$50

Punctuation and reliable.

Inspection for my current hot water system

$10

What's the average cost of a hot water system installer in Adelaide

$90 - $150

low

$90

median

$129

high

$150

Low, median and high bar chart distribuiton

Average reviews for Hot Water System Installation & Repair Services in Adelaide

based on 7 reviews

5

7
0
0
0
0

What is Airtasker?

Post your task

Post your task

Tell us what you need, it's FREE to post.

Review offers

Review offers

Get offers from trusted Taskers and view profiles.

Get it done

Get it done

Choose the right person for your task and get it done.

Now Available
  • Get it done now. Pay later.
  • Repay in 4 fortnightly instalments
  • No interest
  • Available on payments up to $1,500

What do hot water system installation services include?

Hot water system installation services include all the activities necessary to put a reliable, safe hot water system in your home. This involves installing an unvented hot water system, inspecting the installation area, preparing materials, installing the cylinder or tank, then making the needed connections. After the installation, your plumber can test the system for flaws and address them as needed.

Inspecting installation area

Your water heater installation begins with a thorough inspection of the spot that will house the tank and its components. Your plumber makes sure that the floor is robust enough to support the cylinder's weight and complies with established building codes and safety rules and regulations. If the allotted space is deemed insufficient for the cylinder, your plumber can help you look for an alternative spot for the unvented cylinder service. 

Preparing for installation 

Your plumber makes the necessary preparations for the hot water cylinder installation. If necessary, some plumbers may offer to make an improvised platform of sturdy materials to support the tank's weight. Otherwise, you can hire a Tasker to handle all your carpentry needs.

When appropriate, your hired plumber shuts off the power, gas, and water supply before starting the job. They can take all the necessary measurements to determine the right amount of materials, then cuts and bends wires and pipes to the appropriate lengths and widths. Your plumber may also cut holes into walls or floors as needed to allow pipes or wires to run through.

Installing the cylinder

Once the cylinder's space is ready, your plumber can proceed with the unvented hot water cylinder installation. They can place the cylinder or tank onto its designated space and position. Your plumber takes care not to damage any of the components of the vented hot water cylinder or other pipes and wires in its surroundings.

Installing components and pipes

After the cylinder is in position, your specialist proceeds with attaching the appropriate pipes, wires and components like the Temperature and Pressure Release valve, expansion vessel, immersion heater, and any other pipes and valves. As with all other stages of the unvented cylinder installation, they use appropriate materials and techniques that are compliant with state safety and building regulations and industry best practices. 

Testing the system

Your hired plumber tests the system after completing the installation. They check that each tap and shower head provides hot water on demand and flows with consistent pressure. Should variations in temperature or pressure arise, your plumber can troubleshoot the system and do the appropriate fixes. 

They repeat this process until the hot water system works without any issues. And now that your home has hot water running through your taps, tubs, and showers, why not ensure greater warmth and comfort in every room of your home? On Airtasker, you can also hire an insulation installer who can help you cut down on bills and achieve year-round comfort.

Recent Hot Water System Installation & Repair tasks in Adelaide

Pilot light for gas hot water system

$60

Hyde Park SA 5061, Australia

4th Feb 2024

We've an issue with a pilot light consistently going out and now being hard to relight. Looking for some early diagnostics and potential easy fix e.g., - Check for Drafts - Inspect the Thermocouple. - Pilot Light Orifice or Tube Cleaning - Check the Pilot Flame - Control Valve Issues - Due date: Needs to be done on Monday, 5 February 2024

Ceiling fan and PowerPoint for hot water unit

$200

Rostrevor SA, Australia

19th Jan 2024

To remove existing ceiling fan and install with new one, new will be provided To install new PowerPoint for hot water system with material - Due date: Before Tuesday, 16 January, 2024

Well done and on time

Rinnai B1200 heater making loud noise when using hot water

$100

Paradise SA, Australia

15th Dec 2023

The heater makes very loud noise after using it for a couple of minutes It is also leaking a little bit - Due date: Flexible

Fix hot water service

$150

Glenunga SA, Australia

3rd Dec 2023

No hot water in kitchen, laundry or second bathroom - Due date: Needs to be done on Monday, 4 December 2023

Bosch classic dishwasher no hot water.

$200

Athelstone SA, Australia

28th Nov 2023

Bosch classic model SMS50E not getting hot water. Possible heater element problem - Due date: Needs to be done on Thursday, 30 November 2023

Pilot light is out on hot water system

$75

Fullarton SA, Australia

13th Oct 2023

We need someone to check the pilot light and relight it. - Due date: Needs to be done on Friday, 13 October 2023

Hot water system

$600

Payneham SA, Australia

6th Oct 2023

the hot water system issue need to replace the of THERMOSTAT AND ELEMENT COMBO under no upgrade COMPLETE SINGLE PHASE S/B 7C - Due date: Before Tuesday, 10 October 2023

Exchange hot water system

$5

Myrtle Bank 南澳大利亚州澳大利亚

17th Jun 2023

I need someone to give a quotation with changing an electric hot water system Either replace or Change to gas hot water system due to consistent problems Would like to test it out see if any repairs can be done License plumber needed - Due date: Before 2023年6月24日 星期六

Roof plumber to remove solar hot water service

$500

Beaumont SA, Australia

11th Apr 2023

Removal of solar hot water service pump, and matting from roof - Due date: Needs to be done on Thursday, 13 April 2023

Jack was fantastic. Did a great job. Would definitely recommend him

Service gas hot water

$50

North Adelaide SA, Australia

18th Jan 2023

Have a gas hot water system that needs servicing - Due date: Before Sunday, 22 January 2023

Hot water shower issue; Water coming up from bathroom room

$75

North Adelaide SA 5006, Australia

30th Nov 2022

1. Shower has issues - hot water pressure not good 2. Shower water comes later from the bathroom foor vent - Due date: Needs to be done on Thursday, 1 December 2022

Plumbing work - toilet flush & hot water pressure

$100

Adelaide SA, Australia

28th Nov 2022

Toilet flush does not work properly. Hot water pressure not adequate.

Hot water not working in kitchen. mixer tap

$50

Magill, SA

16th Jun 2022

hot water not working in kitchen. mixer tap not two seperate taps for hot and cold

great job completed quickly knew exactly what the problem was

Shower Head Hot Water Leaking

$50

Adelaide SA, Australia

14th Jun 2022

Hi,my shower head has hot water leakage even we turn off the tap tight. Looking for cost-effective services to fix this,looking for best quote and time can be flexible. - Due date: Flexible

Gas hot water fixing

$60

Prospect SA, Australia

19th May 2022

Light goes off inside the gas hot water meter box which stops the heating of water. Need to check it and fix it. Offer me reasonable price - Due date: Flexible

Identify gas leak/relight pilot light (hot water)

$150

Adelaide SA, Australia

30th Apr 2022

Lost hot water this morning, need to know if there is a gas leak or if pilot light simply needs re-lighting Located Everard Park

Installing and connecting a Hot water tank

$400

Adelaide SA 5000, Australia

4th Jan 2022

Need help installing and connecting a hot water system under the kitchen cupboard. Need to do this on two different rooms - Due date: Flexible

Plumbing - move pipes from old hot water system

$250

Stonyfell SA, Australia

30th Dec 2021

Hi, I'm looking for a quote to set some hot water pipes into the wall in my laundry. I have already removed the plaster and cut a channel, I just need the copper pipes bent and welded. The pipes were originally for an old hot water system that's been relocated outside the house. A new hot water feed comes in and connects where the HWS used to. Please see the picture. There is also the cold water feed and bleeders that need to be cut off and sealed (see bottom of photo), as well as a galvanised gas pipe that has been capped just outside the wall that I'd like to move back / remove. All have plaster / brick work already removed around them. Thanks! - Due date: Before Saturday, 8th Jan 2022

Replace 50L hot water system

$350

Adelaide SA 5000, Australia

18th Nov 2021

I have an existing 50L Rheem hot water system that needs to be replaced. There is already a new replacement system on site. - Due date: Needs to be done on Monday, 22nd Nov 2021

Russell did an exceptional job with the replacement and installation of a 50L Hot Water System for my business. Highly Recommend.

Hot water system changeover

$300

Prospect SA, Australia

18th Oct 2021

Old Bosch 16P to new Rinnai Builders 60°C 16L Instant Hot Water System B16N60A B16 *NATURAL GAS*, already here - Due date: Before Friday, 22nd Oct 2021