Find experienced local roofers in South East Perth

I have leaks on roof and need urgent

Refer to photos of en-suite build. Price should be to supply and install etc 1. Window wall: the window will not be removed and want sheeting put up to cover and possibly behind/ external? Add a timber shelf in the bottom right hand corner and cover to allow a shower niche etc Window winder will be removed. Wall2 - install water proof board on all ready for water proof/ tile Other walls are brick/ cement so assume no action required. Thank you Dimensions 2.6L 1.7W 2.45H

Gutter is rusted. Downpipe is not big enough and overflowing with heavy rain

I have a minor Roof leak Vent pipe needs re silicone. Wanting to get done before rainy season starts doesnt need doing immediately but soon

Looking for a qualified roofing expert to get few roof small job Riverton Tin roof We can meet on site wnd discuss, please quote yiur hourly rate and we can access the job and take it from there

The roof batten that supports the tiles has come loose and needs to be replaced.

Need someone to professionally seal off gap into alfresco eaves. Also need gap at front of house sealed. See pictures as reference

We need our old gutters removed and new ones installed. We live in a 3 x 1 small house in Roleystone. I put $100 because I have no idea about the price.

Painting Job - 3 x 2 patio interior roof Interior patio roof, posts and beams painting job – approx. 3m x 2m. Seeking a qualified painter. All materials supplied. Clean down with Selleys Sugar Soap wipes and apply 3 coats of exterior paint.

Gutters of 3x2 single story home to be cleaned.

I need a muller type pvc air vent supplied and installed to my aluminium ute canopy roof for ventilation. They can be purchased from several suppliers in Perth including dunn and watson, bull motor bodies etc. Requires holesaw/pop rivets & sealer for installation.

Installing a kings rooftop tent onto a car

Roof is currently experiencing water ingress during windy rain due to deteriorated gable ends and barge boards. This task is to complete a professional inspection and provide a quote which will ensure the scope prevents any future leaks in the roof. What I had as previous scope details for reference only if helpful: - Close in two gable ends (east and west) using weather-proof cladding. - Install new flashing at the gable-to-tile junctions, installed under lifted tiles with correct lap (no surface-mounting). - Seal all new cladding joints, edges, fixings and penetrations with exterior-grade polyurethane. - Paint the gable face/barge/fascia after the work – plain white colour. - Re-seal and paint barge boards/fascias. - Chimney: clean and reseal flashing/penetrations, including lifting tiles to inspect the under-tile soakers/back-tray; quote separately if re-flash is required. - Install 2 whirly-birds on the tiled roof to provide ventilation, including proper flashing and seal around base. Property is rented so I'll help to coordinate with property manager for access (internal & roof). Conditions I'll need please: - You have your own public liability insurance. - I need a tax invoice on completion. - Work must cause no damage to existing roof tiles. - Before and after photos required please. I am open to other ideas or methods to achieve the same result - refer to attached photos.

NBN technicians advised that a conduit is required for the NBN box to be installed in a specific room. It needs to be run through the roof or along the wall. Possible 10m

I have the shade sail ready to go, set up on 3/4 points. Just need the last point attached via the D shackle and then to my roof. Everything is there ready to go. Should be less than a 30 second job. Unfortunately the only ladder I have just isn’t quite tall enough to reach the loop on the roof. Ideally if someone can come today.

A section of my roof trim has come off during the recent storm. I need someone who can fix this section exposed to look like the correct finish in the second image.

📋 Job Description: Split System Aircon Installation (Gosnells) Hi, I have two brand new Fujitsu split system units (still in box): 3.5 kW unit 5 kW unit Property details: Single-storey home with a tiled roof Front wall: easy access Back wall: easy access but opens into patio/garage — prefer not to install there as it may heat up the sitting or car space Switchboard: single phase ~2m from the 3.5kW unit location ~10m from the 5kW unit location I can provide photos of the front and back walls and switchboard for reference. Looking for a licensed air-conditioning installer (ARCtick certified) to complete the job. 📍 Location: Cleve Way, Gosnells

Plumber removed the connection for solar water heater a while back. Just looking at getting this system removed from the roof to free up space.

The roof is leaking after the recent rains and need help to fix that

Replace damaged Downpipe , need to supply.