Find professional garden shed repair in NSW

Build flat pack garden shed. 3m x 2.25m https://easyshed.com.au/products/gable-roof-garden-shed-3m-w-x-2-25m-d-classic?variant=40701714137247

Small garden shed installation

Need a garden shed installed. Also need concrete flooring to be layed before the garden shed is installed.

Garden Shed Assembly & Installation Hi, I need someone experienced in assembling flat-pack garden sheds. I have one garden shed that need to be: • Fully assembled • Properly levelled • Anchored to the ground • Weather sealed so they do not leak This is important — I am not just looking for someone to “put it together”. I need someone who has installed sheds before and understands levelling and sealing. Details: •The shed is new in the box size 1.52m x W 1.48m x 1.90 H • Location: residential backyard with easy access • Ground area is already prepared (flat surface) • You will need to bring your own tools • Silicone sealing required around roof joins and screw points Please only apply if you have done shed installations previously. Photos of previous work would be appreciated. I’m flexible on day/time. Thank you!

I recently purchased a garden shed from easyshed. Dimensions are 4.5 x 2.25. I need a quote for installing it on a concrete slab in my backyard.

Need to replace the old garden shed with installaing a new on. Please see the photo attached. Kind regards, Jay

Concrete slab for garden shed. Drive through garage for access or 900 side gate.

Need an EasyShed 2.25m × 0.78m Flat Roof Garden Shed assembled in our backyard Paving slab already in place To be installed at the corner of the fence (easy access) Shed to be assembled, positioned & anchored on pavers (Btw I assembled the roof section of the shed but no additional manpower to do the rest 😂) Pls bring your own tools esp. Pop Rivet Gun & Drill bits. Looking for someone reliable & have experience with metal shed installs (preferably EasyShed) Happy to answer your questions.

We need garden shed to be built outside on concrete slab the shed model is below https://easyshed.com.au/products/gable-slider-garden-shed-3m-w-x-1-5m-d-classic?srsltid=AfmBOoonZ7TO7KCFBGCG3uULE4_1p_-ZKGR5XqklQlz62MJHwjNcKj6S

Task Description: Looking for a reliable person to assemble a new Keter Darwin 6x4 plastic garden shed. The work is located in. Video : http://www.youtube.com/watch?v=dfq4rz80Mgg Key Requirements & Steps (Detailed Scope of Work): Step 1: Land Preparation (Critical): Step 2: Shed Base Assembly: Connect the two-part plastic base and secure it with the initial screws once the ground is level. Step 3: Panel Installation: Slot in the ~20 plastic panels, including corners and back pieces. Step 4: Roof Assembly: Assemble the two-piece roof with the strengthening bar and center joining strip. This part requires perseverance and detail to ensure it is watertight. Step 5: Door & Hardware: Install the two doors, including the hinges and the locking mechanism, which can be a bit fiddly and requires manual assembly. Correct ground leveling is essential to prevent doors from misaligning. Step 6: Fixings: There are hundreds of screws involved in this build to fully secure the joints and the base. Keter Storage Shed Shelf Kit × 1 needs to be installed inside at the end Tools Needed: Shovel/Rake/Levelling tool (for land prep). Electric Drill/Driver (highly recommended due to the large number of screws). A ladder for reaching the roof panels. Additional Details: Location: [ Austral/Sydney NSW 2179] Timing: Flexible, but would prefer completion in a single session, given the sequential nature of the ground-to-shed build. Pro-tip from the video for the Tasker: If you find the hinge holes difficult to line up, try driving a "pilot" screw in and back out first to clear the path. Please also ensure the outer door trims are perfectly aligned so the doors shut correctly.

Put up a new garden shed up

Dismantle and remove garden shed and contents. Access via side gate. Located in Nowra

Need 2 garden sheds assembled tomm (between 1030am and 1pm) It’s a 2 person job (I will be around moving stuff - so can lend a hand to position panels)

I have a small metal garden shed that needs building. Its 0.72mW x 2.1mD x 1.8mW. It has full instructions and a build video.

20 yr old shed damaged by recent winds need a repair to keep most of the rain out.

Need someone to come Assemble our new shed ASAP please

Pour a 1.2m x 3m concrete slab for a garden shed Wheelbarrow access is okay.

I am looking for a reliable Tasker to completely dismantle and remove a small metal garden shed located in Toronto, NSW. The shed will be emptied of all contents prior to your arrival. The job requires dismantling the structure, loading all materials, and disposing of them legally. Shed Details: Material: Metal/Colourbond steel Approximate Dimensions: 1.5m (width) x 0.78m (depth) x ~1.8m-2.1m (height) Location: Toronto, NSW (easily accessible) Date: TBA Disposal & Payment Arrangement: The agreed-upon price will be a for labour only. The successful Tasker is permitted to keep all the metal from the shed for scrap/recycling purposes. This arrangement avoids tip fees for me and provides an incentive for the Tasker. Local recyclers (e.g., in Teralba or Charlestown) are nearby. What We Need: Safe and complete dismantling of the shed. Clean up the area afterward, to remove any debris or screws etc. Removal of all shed components from the property. Legal disposal/recycling of all materials Please bring all necessary tools for dismantling (drills, screwdrivers, angle grinder if needed, safety gear, etc.). Photos: Please refer to the attached photos for a clear view of the shed. Feel free to ask any questions.

Need garden shed demolished and the materials removed

Fix small garden shed: remove flaking paint, rehang door so it can open the other way/ replace door if needed. (Currently the door opens inwards so there's no storage space!).It's possible it has led paint due to age. Paint shed door.