Find professional garden shed repair in Sydney Eastern Suburbs

I have ordered a garden shed from Bunnings that I need built and bolted to the ground. Please see image for specifications of shed and where it needs to be placed. Needs bolting into concrete slab as per photos. Keen to get it done asap and will prioritise someone who can do it soon.

Come to the house and put together an easy shed 2.25m x 2.25m gable roof garden shed to sit unattached on a concrete block

Dismantle, remove and dispose (take to dump) small damaged garden shed in our backyard. Must be fit - many steps!

Considering installing this shed inside an existing narrow carport space and looking for advice on feasibility plus installation quote: * MIGHTYMO 1.8m x 4.2m skillion roof shed. * https://shedsandcarportsonline.com.au/product/garden-shed-1-8wx4-2dx2-0hm-skillion-roof/ Space dimensions: Width between posts: 2.35m Rear height clearance: 2.07m (increases throughout carport) Depth under roof: approx 5.07m Flat concrete slab No obstructions Main concern is whether assembly is practical within the confined space and whether there are any clearance concerns. Would appreciate: * feasibility assessment * approximate installation cost * any concerns with this setup Can provide photos if needed.

I have two garden sheds, approximately 2m x 1.3m. They're sitting on the side of the house. I need the sheds and their contents temporarily moved in to the backyard - 20m away I've attached photos of the sheds, their contents and one photo of how the metal shed is attached to the ground (needs to be disconnected before move).

New garden shed 3.75 m x 1.5 m On concrete

I need to assembly my garden shed

I need to disassemble a garden shed, 220cm W x 125cm D x 180cm H. Not completely, into 4-5 part to be able to move it out, it’s a 4 months old.

Install a Stradco garden shed

Need to remove a gate and in its place build an EasyShed

Assemble Absco 3.0m x 1.52m Garden Shed (on existing slab) I need someone experienced with flat-pack sheds (preferably Absco or EasyShed) to assemble a brand new Absco 3.0m (W) x 1.52m (D) x 2.08m (H) Monument Space Saver Double Door Garden Shed. All panels are still boxed. The shed will be installed outdoors on an existing concrete slab/base. Job includes: • Unpack and sort parts • Assemble wall and roof panels • Install sliding/double doors • Ensure doors open/close smoothly and structure is square/level You must have: • Previous shed assembly experience • Own tools (drill/driver, step ladder, clamps recommended) • Able to work safely — metal sheets have sharp edges Details: • Parking available on site Please confirm in your offer: 1. Your experience with similar sheds 2. Whether you can supply dynabolts/anchors Photos of the shed and dimensions are attached. Thanks!

To assemble an outdoor storage 2.38x1.31M Giantz Garden Shed w/Metal Base Sheds Outdoor Storage Tool Workshop Sliding Door. I have done half of it and half way to go.

I need someone to complete the installation of a flat-packed garden shed that is currently half assembled. The shed was partially put together but couldn’t be finished due to incorrect parts being supplied. Details: •The shed is already half built and located on-site (flat ground). • All correct parts, tools, and instructions are available. • Task involves completing the frame, securing the roof and doors, and ensuring everything is aligned and stable. • Prefer someone experienced with Absco, EasyShed, or similar flat-pack sheds.

Assemble flat pack garden shed

I would like someone to level the brick pavement and install a 2.25m x 0.78m Narrow Slider Garden Shed at the rear of my property

Assemble new garden shed from Easyshed. 3.75m x 0.78m. This also includes anchoring the shed to concrete driveway.

Build a narrow garden shed with a sliding door. Size: 2.25m x 0.78m x 1.98m We started building it but turned out harder than anticipated. Can assist with building and putting together. I have a basic tool kit and small drill bit if you have better tools please bring them with you. I’ll be home Thursday morning and pretty much all Friday but can work around that. Please help!

We need a garden shed to be deconstructed and taken apart. Then we need the concrete slab the shed is currently on to be removed with a jack hammer so that grass can be placed there instead. Concrete removal also required.

We need an EasyShed Garden Shed assembled outside our house. The dimensions of the shed are 1.5m (L) x 0.78m (W). Tools you will need to bring to assist assembly; - Power drill -String line - Phillips Head Screwdriver - Pop Rivet Gun - Drill Bits 3mm Steel https://easyshed.com.au/products/narrow-slider-garden-shed-1-5m-w-x-0-78m-d-classic?syclid=dfd0147e-6907-4ffa-9e1f-da063cd4587d&utm_campaign=order-confirmation-email&utm_content=product&utm_medium=email&utm_source=OrderlyEmails

Keter garden shed requiring assembly