Find professional garden shed repair in NSW

Assemble 3m x 1.5m garden shed as per picture

Need a 3x3 aluminium garden shed slab done allready

Looking for someone to help assemble a 3x3 garden shed (from Bunnings). I’m after someone who’s confident with this type of job and ideally has experience assembling similar sheds before. The concrete slab is currently being organised, so the job will likely be ready in a few weeks. If you’ve done this kind of work and have your own tools, please get in touch with your experience and availability. Specs to shed - https://www.bunnings.com.au/absco-sheds-3-0-x-3-0-x-2-06m-monument-premier-double-door-garden-shed_p0084389

Assembling Garden Shed in backyard 3mx1.5m shed

am looking for someone to assemble and install a garden shed, including constructing the timber floor/base and securing the shed in place. All materials will be supplied, including four 3m lengths of timber, three 80cm support pieces for the floor, and the shed kit.

Need a 3.75m x 1.5m Skillion Roof Shed install from easy shed It’s on a clean concrete slab Lincoln street belfield

4.5 by 2.5 wide by 2.3 high Easy shed as thats what im planning to buy Slab will will be done Parking on site plenty parking as its a cul-de-sac street If someone can recommend a supply and fit that would also be an option so please provide that as a price or requote Also need to dismantle the shed i have 2.2wide by 1.5 deep as i had it installed and will sell it separately

We need to have a garden shed put together

Hi, looking for someone experienced to assemble garden shed on my backyard I need Full install shed with anchor shed to the slab

Build 3.75 x 3 m flat-pack EasyShed Gable Roof Shed Requires two people

Dismantle and dispose of metal shed Approximately 1.5 m wide x 2 m high

Looking for someone to assemble a small flat-pack metal garden shed (robot lawn mower shelter). Approx size: 97cm (L) x 92cm (W) x 63cm (H) All parts and instructions provided Needs to be assembled outdoors in backyard Ground is flat and ready This is a small unit but has multiple panels and screws, so experience with similar sheds or flat-pack builds is preferred. Requirements: Must bring your own tools (drill, screwdriver, etc.) Experience assembling metal sheds or flat-pack items Take care to align panels properly and ensure it’s sturdy

Remove old garden shed and Install a new shed in the backyard

Garden shed demolition of a small old shed Take away all rubbish including the whole old shed Take away all rubbish inside the old shed so that is nothing left behind We need someone that will be careful with rubbish removal as we just refurbished the entire pathway in the front yard we do not want this damaged please

Garden shed double doors need fixing. The doors are not fitting properly and are currently not bolted in place. It’s a double-door shed and we already have all the tools required for the job. Looking for someone who can come and properly align and secure the doors.

We need garden shed to be built outside on concrete slab the shed model is below https://easyshed.com.au/products/gable-slider-garden-shed-3m-w-x-1-5m-d-classic?srsltid=AfmBOoonZ7TO7KCFBGCG3uULE4_1p_-ZKGR5XqklQlz62MJHwjNcKj6S

Task Description: Looking for a reliable person to assemble a new Keter Darwin 6x4 plastic garden shed. The work is located in. Video : http://www.youtube.com/watch?v=dfq4rz80Mgg Key Requirements & Steps (Detailed Scope of Work): Step 1: Land Preparation (Critical): Step 2: Shed Base Assembly: Connect the two-part plastic base and secure it with the initial screws once the ground is level. Step 3: Panel Installation: Slot in the ~20 plastic panels, including corners and back pieces. Step 4: Roof Assembly: Assemble the two-piece roof with the strengthening bar and center joining strip. This part requires perseverance and detail to ensure it is watertight. Step 5: Door & Hardware: Install the two doors, including the hinges and the locking mechanism, which can be a bit fiddly and requires manual assembly. Correct ground leveling is essential to prevent doors from misaligning. Step 6: Fixings: There are hundreds of screws involved in this build to fully secure the joints and the base. Keter Storage Shed Shelf Kit × 1 needs to be installed inside at the end Tools Needed: Shovel/Rake/Levelling tool (for land prep). Electric Drill/Driver (highly recommended due to the large number of screws). A ladder for reaching the roof panels. Additional Details: Location: [ Austral/Sydney NSW 2179] Timing: Flexible, but would prefer completion in a single session, given the sequential nature of the ground-to-shed build. Pro-tip from the video for the Tasker: If you find the hinge holes difficult to line up, try driving a "pilot" screw in and back out first to clear the path. Please also ensure the outer door trims are perfectly aligned so the doors shut correctly.

Put up a new garden shed up

Looking for experienced, reliable Taskers to assemble a large garden shed approximately 3.62m Wide x 3.57m Deep x 1.95m High This is definitely a two-person job. Details: • All shed components are on site • Instructions included • Brand/model: stratco handy mate • Location: Blackheath • Base: concrete slab Scope of work: • Full assembly of shed (walls, roof, doors) • Ensure structure is square and level • Secure/anchor to base • Clean up and remove packaging Requirements: • Must have experience assembling larger sheds • Must bring own tools • Attention to detail is important – want it done properly and securely Please quote a flat rate for the full job. Flexible with dates but would like completed within the next week.

Dismantle and remove garden shed and contents. Access via side gate. Located in Nowra