Find trusted curtains & blinds installation experts in NSW

I need one set of curtain rods installed

Need someone with a ladder to help hang 2 x curtains, window is 3.5m track & Curtains ready to go. 30 min job. Parking provided :) 3pm

Experienced Curtain Installer Needed – Brookvale NSW Looking for an experienced curtain installer to replace existing bedroom curtains in an apartment in Brookvale, NSW 2100. Job details: Remove existing custom-made double pinch pleat curtains. Install new Spotlight Gummerson Neutrals Blockout Pencil Pleat Curtains (Chalk colour). The existing ceiling-mounted curtain track is to remain in place. Spotlight has confirmed that the existing track is compatible with the new pencil pleat curtains. Gather the new curtains by pulling the heading strings to the correct width (Spotlight advises each curtain should be gathered to half the track width plus 5 cm). Insert curtain hooks approximately every 8–10 cm along the heading tape. Hang the curtains, adjust the pleats and ensure they open, close and hang correctly. Important information: The previous curtains were custom-made double pinch pleat curtains, and the replacements are ready-made pencil pleat curtains. A handyman previously attended but was unable to install them. Spotlight has since advised that the new curtains should fit the existing track with the correct gathering and hooks. I am therefore looking for someone experienced specifically in curtain installation, particularly changing from pinch pleat to pencil pleat curtains. The curtains are already at the property, and some hooks have been purchased. Please advise if additional hooks or accessories are required. Please only respond if you have experience with this type of curtain installation and are confident you can complete the job. Thank you!

I need three curtain rod brackets to be screwed into wall/ceiling please. I have all the brackets and screws. Just need a drill.

Install 1800x1800 blind Remove old blind and dispose of it

I have a linen curtain and Rod that needs to be drilled into a brick wall

I bought an outdoor 3 metres motorist curtain and I need to install it over the BBQ area to cover it from the rain, the problem is it need to be installed on the top of the out door roof area not the wall as there is a Callum prevent it from being installed on the wall, will provide more detail if needed, also it need to be connected to the power as it’s a motorist curtain. Please check the attached picture for the curtain, there’s also an insulation video available if needed

I need help putting up curtain rod hooks

Looking for help to professionally curtains installation. We have got the curtains rod and curtains as per the bleow photos. Please provide your owns tools and let us know your earliest availability. Thank you.

Just need curtain brackets drilled/installed for 5 windows (inc bay windows) I have x5 IKEA BEKRAFTA sets. Unfortch the rods are 120 cm min and a couple of the windows might be smaller. So would be a plus if someone can also shorten them! I live in an art deco rental so doesn’t have to be perfect. I think the walls are all solid/brick. But would still appreciate a neat job!

Looking for someone experienced with IKEA VIDGA ceiling-mounted curtain tracks to fix a recently installed system that has several installation issues. The tracks are already installed, but need to be adjusted/rectified: * Track joins are misaligned/uneven, which is stopping the curtain gliders from moving smoothly across the joins. Some curtains are already hung, but currently cannot be pulled properly across the full track. * In the main bedroom, the tracks have been installed right up against the side wall, leaving no access to remove the end caps. Because of this, we currently cannot insert the curtain gliders/hang the bedroom curtains. * Tracks may need to be partially removed, repositioned/aligned and securely reinstalled so all joins are smooth and the curtains can travel freely. * Bedroom track needs to be adjusted so there is proper access to the end cap for inserting/removing gliders. * Please also check the overall installation and make sure the tracks are secure, straight and functioning correctly before finishing. The tracks are ceiling mounted and already cut to size. We are looking for someone who is confident working with the IKEA VIDGA system and can rectify the existing installation rather than replace everything unnecessarily. Please bring appropriate tools and fixings. Photos of the current installation attached

- I need the old blinds removed and disposed of - New blinds installed. The space needs to be measured - I ideally want a blackout blind + a semi see thru blind for use during the day - I don’t currently have the blinds bc I don’t know how big the area is - The ceilings are quite high

Install curtain brackets, rod and curtains into bedroom. Will provide the above - just needs to be fitted neatly to a high standard

Installation of one Roman blind into a window recess. The blind comes with two brackets and screws and clicks into place.

Need to install some ikea curtains on ikea tracks/ racks. Possibly 6/ 7 tracks.

I am looking to have a 2.8 metre width curtain rod from Freedom mounted to the ceiling. Photos of ceiling area and rod are attached. You will need to supply your own ladder/tools. Please make offers :)

Hang roller blinds . 1 only as shown .

Just need someone with an impact drill to install a curtain rod (2 brackets) into concrete wall

Nine blinds have been purchased. Three need to be cut and all of them need to be installed.

Looking for a reliable handyman to help mount a curtain rod in my bedroom behind an already existing curtain rod. Wall Type: Solid concrete wall (requires a masonry drill and appropriate concrete anchors/screws). Materials Provided: Curtains and curtain rod. Requirements: Please bring your own hammer drill, masonry drill bit, and suitable masonry anchors/screws.