Find a local floorboard profesional in VIC

Refinishing of timber floors (downstairs) in a Reservoir townhouse. Approx 40m2. Refer floorplan I've highlighted in blue the extent. There are some gaps between boards that need to be filled in a few areas. Sand and refinish floors to new condition. Use hardy sealer / polyurethane coat. House has been recently painted and new carpets etc so dust suppression must be used.

The floor boards need repairing. When the heater vent was installed, it looks like they just cut the hole, which left the planks of wood between the vent and the doorframe not supported underneath. Someone stepped on it the other day, cracking a board and pushing it down. Likely just needs to be glued back together, then some pine wood put underneath the floor boards to support it and prevent it cracking again. The subfloor has enough clearance to walk around for the most part. Directly under the vent there's probably about 1m clearance

Our home is very old with wooden floorboards in bathroom. There are 3 small area of rotten boards to be replaced. Boards dont need to match as bathroom will be renovated in future. Biggest hole is close to toilet.

Supply & replacement of several damaged/rotted weatherboards. Also sanding back/patching of others.

We have several pine floorboards (150mm) that need to be replaced. We would like someone to come out and remove and replace the boards. Preferably if you have reclaimed pine floorboards that would be best to suit this 50 year old home. These are tongue in groove boards.

There is creaking sound coming from floorboardings at multiple areas around the house. Most spots are floorboards under a carpet. The carpet would need to be pulled off and relaid ensuring there is no tear and carpet is intact. This is a permanent carpet glued so no sure what can be done but would appreciate suggestion and quotes for options to fix those loose floorboards.

I need to polish flooring boards

Repair two holes in laminate floor board inc fill and level it, and match the colour, grain, and sheen as closely as possible.

Weatherboards to be sanded for me to repaint. It's a small 3 bed weatherboard, single story. Was last painted in 2014 so modern paint. Am open to doing this in stages, as I need to complete certain areas as a priority due to paint cracking. Property size 110m2/1180 square feet

I’m located in Frankston VIC and I’m looking for a team or experienced tradie to replace weatherboards on my property. Job details: Scope: Weatherboard replacement (full or partial – happy to clarify) Property: [House single storey] Access: Easy access to the exterior Timing: Looking to start as soon as possible Priority: Quick turnaround with quality workmanship Could you please let me know: Your earliest availability Whether you work as a team (for faster completion) An estimated price range (happy to provide photos or arrange a site visit) Confirmation of insurance and experience with weatherboards I've attached some images below. We can arrange a site inspection. Thanks, Zee

We some damage on some floor boards, looking for someone to fix asap. - no spare board available, about 2 meters from the wall,

Need to sand and polish 5 bedrooms, two living , rumpus , walkways. Need to retain the patterns. Refer to photos

Lay vinyl plank floorboards in two bedrooms kitchen area and living area for a granny flat approximately 36m2, need done Sunday

Replace 2x damaged floor boards in kitchen area, we have the spares which require cutting to size.

Remove carpet, sand and polish floorboards underneath. Dispose of carpet. Tools to be supplied by you. 2 bedrooms only, 27sqm in total.

Looking for vinyl floating floor boards to be installed in a small kitchen over existing tiling. Approximately 6 square metres. Flooring already provided. Floor is already level. Might need to even out some imperfections.

Need floor tiles to be installed, grouted and levelled with existing floorboards. Tiles will need to squared to floorboards

My flooring boards created gaps and need someone to replace the boards with new one and seal the edges with silicone seal. need I person inspection before job to fix route cause as I can see flooring level is abit irregular.

Remove skirting boards, around 10 pieces, throughout a 2-bed apartment, Little Lonsdale st, near Southern Cross

We have 2 floor boards needing replacing due to a bed damaging one and a sparkler damaging another. We have the spare floor boards for it, may need just a cm or two cut of to fit exactly in. We just need someone professional that knows what they are doing with flooring and can put them in for us completing the job correctly. I have added an extra 2 photos showing the distance from the wall to the individual floor board needing replacing.