Find an experienced flooring expert in VIC

I have removed my carpet my floor is concrete, I need someone to install laminate flooring that I will purchase

So I’ve got a carpet in a living room and I just need someone to add floor boards in a small living room NEED A FREE QUOTE ASAP

Lay new merbau decking boards. Boards already purchased.

A old caravan and need to install vinyl laminate flooring. Have the underlay the glue and the flooring ready to go. Just need someone who can do it. Either done today or tomorrow morning. Someone’s coming to fit out the inside tomorrow.

Supply and install 45.8 m of stick down non scratch floor boards

• Remove and dispose of old carpet and underlay from: • 3 bedrooms • Walk-In Robe (WIR) • Built-In Robes (BIRs) in 2 bedrooms • Prepare concrete subfloor before installation: • Clean and level surface • Remove old adhesive residue • Patch cracks and apply primer or moisture barrier if required • Install glued-down LVP (luxury vinyl planks) throughout the above areas • Fit neatly around skirting boards, wardrobe trims, and door frames • Ensure smooth transitions to adjoining tiled or hallway areas • Remove and dispose of all waste/debris after completion Room sizes: • Bedroom 1: 3.3m × 3.3m • Bedroom 2: 3.0m × 2.9m • Bedroom 3: 4.2m × 3.6m • Plus WIR and BIRs in all bedrooms Please provide a quote for both options: 1️⃣ Labour only (LVP supplied by owner) 2️⃣ Supply + install (please specify brand, thickness, and warranty of LVP you’d provide) Please confirm in your quote: ✔ Experience with glued-down vinyl planks (not click-lock)? ✔ Is floor preparation (levelling, primer, moisture barrier) included? ✔ Are materials and adhesives included (if supply + install)? ✔ Waste removal included? ✔ Warranty on workmanship? ✔ Can you quote from photos and room sizes, or would you like to visit to confirm measurements? Budget: $600 (labour-only starting estimate – open to quotes)

Install approx 8m of trim in Kitchen

Hello there! Looking for someone who can remove existing carpet and install vinyl planks in an apartment ( roughly 30sqm ) We can provide planks, or if you have an offer that comes with planks and installation we can work around that as well. Price is negotiable, please ask if there's anything that's unclear. Thanks!

Looking for vinyl floating floor boards to be installed in a small kitchen over existing tiling. Approximately 6 square metres. Flooring already provided. Floor is already level. Might need to even out some imperfections.

I need an experienced floating floor board installer to lay boards & quad that we will supply. Appx 32 sqms. We will remove the existing flooring & dispose of it. Job is in Richmond.

Need floor tiles to be installed, grouted and levelled with existing floorboards. Tiles will need to squared to floorboards

Pick up and pay for flooring underlay https://www.bunnings.com.au/qep-2mm-11m-silver-laminate-floating-floor-underlay_p6650148 From Bunnings and deliver to LOT 105 BUTTERCUP CRESCENT ARMSTRONG CREEK

Install Vinyl adhesive wallpaper on the concrete wall. Might need some extra adhesive so it stays on concrete. Size is 8x2.6m

Lay ikea Runnen floor panels in backyard. Total space is 6.5m x 3.5m. Will need to cut edges to fit to space and rubber mallet to click into each other.

If you need to inspect, it can be arranged after 22nd September. The floor space is roughly 160sqm (floor plan attached). Currently, part of the house is carpeted and the rest is old timber flooring. Advice on material selection will be greatly appreciated.

Please make an offer to Install timber laminate flooring in one room 3m x 3.5m including small robe 1.5mx1.5m. Remove and dispose of existing carpet. Timber laminate and underlay supplied.

Full installation of hybrid flooring to existing wooden flooring. Finishing it with caulking and the rest needed.

Could you please let me know how much you charge per metre to install laminate flooring. I’ll supply the underlay, laminate and scotia. 62 square metres and removal of carpet

Hi there. We are looking at a quote that will include removal of carpet and remove of partial laminate floating floor, as well as a small section of tiles. And install Tasmanian Oak timber flooring that will be supplied (we may need additional however). It will be just for the hallway and living / kitchen area for a small cottage. Specs to follow.

We have a small area of 6 sqm to be floored with engineered timber. It was carpet before and has been removed. It is next to existing floor boards. See pictures

Hi all, Keen to get a quote pls for sanding + polishing 80 sqm of pine floorboards across 4 rooms + 1 hallway. Floors are in reasonably good period condition (Victorian weatherboard) but have an orange tint to them. Would like them finished to a clear mat finish. Pls see images of current floors (1st photo) and what I'd like them to look like (2nd photo) Thank you!

Remove carpet, sand and polish floorboards underneath. Dispose of carpet. Tools to be supplied by you. 2 bedrooms only, 27sqm in total.

Polish timber flooring and lacked

Geelong Empty House No Furniture Remove carpet and polish floorboards in 3 x rooms

Need floor boards polished

I need someone to lightly sand and repolish 3 boards under the sink. They are not damaged just lost polish. 3 metres in total

Require 38 sqm grind and polish clear

Keen to have my floorboards vacuumed, mopped, and polished, and in particular — need help with some strong carpet tape residue left on the timber. We’ve removed most of the actual tape, but there’s still a fair bit of stubborn sticky residue left that’s proving tricky to remove. Looking for someone with experience in floor cleaning and gentle adhesive removal who can get the boards looking clean again without damaging the varnish or timber. Ideally you’ll bring your own supplies (e.g. mop, polish, adhesive remover, scraper, cloths, etc.). I have a vacuum for use. The job covers around 50m² of floorboards across the dining, lounge, hallway, kitchen and entrance areas. 📷 photos of the rug tape residue

polished concrete flooring in garage. it’s already concreted needs to be buffed rocks added and materials to be polished

Sanding and polishing of 100sqm of internal floor boards

hi i need the kitchen floor to be polished. it is for the area of 5m x 5m atm, it is old vinyl flooring, needing to: - remove the old vinyl flooring - re-polish the hardwood timber

Existing garage floor is smooth and intact. No repairs necessary. The epoxy coating is peeling and needs to be removed through grinding. Exposed concrete should be polished to shine. Work site is covered and enclosed. Water and power available.

140 sqm of showroom floor to be sanded. I don't want this cut right back, but rather remove current coatings enough to stain 2 X coasts of Japanese black and then finish with 2 X matte protective coats. Wood is Jarrah. All furniture has been removed and ready to go. Need done by end of month please.

Im having the ducted heating system removed and i need these floor vents filled in with timber, sanded down and varnished / polished to match the surround. There is 6 of them to do. Roughly 300 x 100 mm

We are looking for a floor expert to sand and polish our floor boards in our living areas, kitchen, entry way and hallway.

Sand and polish floorboards 11.2 square meters

Lookig for an estimate for repairs on floorboards where there have been some scrapes and scratches caused by a fridge moving in the kitchen. I've attached some photos.

Sand and polish 25sqm of flooring Including lounge, dining, hall, butlers pantry. Wanting to keep similar warm brown and pictured in the polished boards in these pictures. But make consistent with the secondhand boards that have been installed. Needing done after first week of November.

I have a single garage looking at getting polished concrete looking for quote

Sand, stain and polish wooden kitchen floor to match living room floor. Currently it is a bit darker, and has some light areas due to kitchen remodel. No nails and fairly good condition floor. Quote should include all labour, materials and equipment.

Existing timber floor requires sanding back and refinishing with water based coating system. Approx 147m2 in total Quotes welcome

Floorboards need refinishing - looking for quotes

Seeking someone to buff/polish roughly 40 square metres of floorboards. (Wormy chestnut) Per the floor plan only the hallway and living area. Bedrooms and bathrooms are carpet or tile. Floors were fully sanded back 3 years ago with water based clear coat applied. Floors are in good condition with light scratch marks. I am not seeking perfection. Some marks may remain. But I won’t have a full re-sand done so soon as one was only done 3 years ago. I am seeking quotes. I will remove and replace my own furniture. Thanks

Open plan Living Kitchen Hallway -- wood flooring - needs sanding back and then varnished again

Sand old polish off and refinish floor boards in one medium sized room, one small room, small corridor and small foyer

We’re moving into a new office space that has 110m2 of existing engineered timber flooring. The current finish is too dark so we would like the floor sanded back to oak and then re-stained in a light lime wash finish. All existing furniture items in the space will be removed prior to works commencing.

Require sand refinish with satin varnish 80sqm of timber flooring

Bamboo flooring has a couple of marks that need refinishing 1. heat from the fridge has led to a scorch mark (see image) 2. water marks in other areas from pot plants 3. scratched floor from a desk chair

Urgent time sensitive. Need asap start. Just bought house, have 10 days before need to move in. Floors need work. Description of task: EXISTING FLOOR: - have 46 square meters of chevron timber floor in apartment. Don’t like the colour - need floor sanded and refinished to match lighter Color of timber flooring in bedroom Install New Timber Floors in Bedrooms - have all materials purchased - would like to remove carpet in each bedroom (each room is 10 square meters) and install new timber flooring (materials provided) - the living room refinishing of floor should match the new floors for the bedroom as close as possible - plank installation concrete stick - linear pattern (not chevron) Whoever can start first is who I will book Cost being offered based on what I have been quoted by a company but they can’t start until later New floor installation: 50 per square meter - 20 square meters = approx 1000 AUD Existing floor sand and refinish 34 per square meter - 46 square meters = approx 1,500 Happy to negotiate Need someone who can start asap

25sqm living room area timber floor. There are stains soaked in so it needs sanding + staining + coating. Maybe just half of the area as the rest are covered by sofa and carpet.

Recently entered into contract for 2 bed apartment and preparing for the impending renovations/touch ups required before I can move in. Currently tenant in place for next 45 days so trying to secure everything in advance. Would like to have the carpet in the bedrooms removed and replaced with chevron engineered timber flooring (to match the living room). Also need to have the entire floor refinished. Its currently a dark brown/wood colour and I would like to change it to be like a grey frost. - Due date: Before Thursday, 2 May 2024

Kitchen Floor Refinish - ~56 sqm Sanded back and protective coatings Budget amount is just a place holder. - Due date: Flexible

Hey there, my name is Jeremy . I need to hire a handyperson to help me in Noble Park VIC, Australia. What do you need done? Floorboard sanding and polishing in Noble Park What is the type of property? House Which areas of the property need work? Roughly >100m2 What would you like the handyperson to work on? Hiring a machine to sandback flooring and polish either entire floor with spot treatment. Thanks in advance! - Due date: Flexible

Sand, counter sink nails and clear finish 120sqm flooring - Due date: Before Saturday, 8 July 2023

We require ~65sqm of vic-ash floorboards to sanded in a 2-bedroom house (with vic-ash stairs also needing refinishing). The wood has discoloured orange so we'd like to use a water-based finish eg. Bona traffic HD I have calculated floor areas (excluding bathroom & balcony and kitchen joinery) as follows; Ground Floor: 31m2 Upper Floor: 30m2 Stairs: 4.5m2 Total: 65.5m2 Start date: 01 February 2023

I have a vintage bamboo small stools and table i need sanded, stained and varnished - Due date: Flexible

Timber floorboards in small kitchen area need revarnising and a light buff/sand as varnish worn away in high traffic areas Room measurements: 1.9mx 3.6m - Due date: Flexible

I have recently installed a new floating floor. There are two rooms either side of the new floor that have carpet in them. The carpet needs to be refinished up to the floating floor in the doorways using new smooth edge, there is no need for any metal trim as the floating floor has a trim already. One doorway is 800mm the other is 1500mm. - Due date: Flexible