Find an experienced flooring expert in North East Melbourne

The issue is minor in between the vinyl flooring boards and should be a straightforward repair using a suitable patching method such as heat / wax method. My budget for the repair is $200. Please let me know if you can complete the job within this budget. Eg: hard wax sticks with an electric heat pen or hot melting tool and smoothing the surface etc

Small two bedroom in reservoir needs full sand and varnish of timber floors. Please refer to floorplan. All rooms to be done excet bathroom/laundry. Coating to be waterbased clear matte Loba or similar. Thanks

Timber floor repair – plugs, inserts, sanding & colour matching Location: Ivanhoe, VIC Budget: $500 - open to reasonable offers based on the required work. Looking for an experienced timber flooring specialist to repair and restore the section of wooden flooring shown in the attached photo. There are several holes, damaged sections, and black and white patches. Work required: * Repair holes using matching solid timber plugs. * Fit matching timber inserts into gaps and damaged sections where appropriate. * Sand the affected area and treat staining as needed to remove or minimise the black and white patches. * Colour match and refinish the repaired area to blend as closely as possible with the surrounding floor’s colour and sheen. Looking for a neat, durable repair with careful attention to matching the existing timber and finish. Please advise whether the staining can be removed through sanding or requires additional treatment or replacement timber. Please include all labour, materials, equipment and finishing in your offer, along with your availability and photos of similar repairs you’ve completed.

Hello. I've got a couple of Merbau decks that need some TLC (one is 10x3.5m and the other is 4.5 x1.5m approx). They need a clean and oil. I'd also like the general clean on the deck, to clean and remove cobwebs. We have a poly carbonate roof on the deck that needs a clean - it has dirt build up on it. You'll need a big ladder.

Hi there, I am in the last push of house renovation in Preston (doing it my self) and looking for some one with a enough experience to quote the installation of skirting boards around 3 bedrooms, 36 linear meters in an old masonry Victorian house. Also, I am after the installation of the architraves in the extension of the house ( a average architraves from Bunnings)

Looking for an experienced flooring installer to remove existing carpet and install engineered timber flooring in four bedrooms and the upstairs hallway, approximately 60 m². Please note the home its less than 2 years old and on a concrete slab. • I will supply the engineered timber floorboards. • Full glue-down installation onto the concrete slab. • Installer to supply suitable adhesive and all other installation consumables. • Remove and dispose of carpet, underlay and carpet fixings. • Carefully remove and reuse existing skirting where possible. • Include necessary doorway trims and transitions. • All rooms are empty, with clear access. Please include labour, consumables and rubbish disposal in your offer. Any floor preparation or other additional work must be discussed and agreed before proceeding. Please mention your experience with glue-down engineered timber flooring and whether skirting refitting and touch-ups are included. Location: Bellfield, VIC Preferred timing: 06/11/2026

Please let me know availability - Looking for someone to stain the hardwood floors (living room, dining room, entry, hallway) to a dark brown (85 sqm). The floors are in very good condition (see pictures), just don't love the colour.

I am seeking a qualified vinyl flooring installer to replace the bathroom floor and repair water-damaged subfloor timbers. The bathroom currently has vinyl flooring with a long-standing crack that has allowed water ingress, causing damage to at least one timber near the waste outlet. The house is on stumps, providing access underneath the floor. Scope of Works * Remove and dispose of existing vinyl flooring and all related waste.
 * Remove and reinstall the shower screen after the new flooring is installed.
 * Leave the vanity in place where possible. Removal is only required if necessary to repair damaged timbers beneath it (unlikely and not to be included in the quote).
 * Inspect and repair/replace damaged subfloor timber(s). Based on my inspection and photos, at least one timber requires repair.
 * Supply and install 5mm exterior-grade underlay plywood.
 * Supply and install commercial/industrial-grade vinyl flooring.
 * Cut and fit vinyl neatly around the existing vanity.
 * Install vinyl cove/skirting to match the current layout.
 * Reinstall the shower screen.
 * Ensure the completed installation is fully watertight.
 Measurements * Total floor area: approximately 3.84m² including vinyl cove/skirting rising approximately 120-130mm up the wall. Total wall length for cove/skirting: approximately 4.9m.
 * Refer to attached photos for dimensions.
 Additional Information Photos are attached showing the damage discovered after I cut away a small section of vinyl near the crack. The area has been temporarily patched to allow continued use of the shower until repairs are completed. This is a rental property. I am looking for a contractor who can complete both the flooring replacement and timber repairs. Please provide your quote, any assumptions, and an estimated timeframe for completion. Thank you.

I want my cabinets to sit flush against the wall but I’m having trouble removing the skirting board myself. The cabinets cover most of the wall there is about 20cm on either side that I want the skirting board to stay/ get put back to sit around the cabinet and into the corners. The power plugs and antenna won’t be needed anymore as they’re getting moved to behind the tv too.

I have a laminate floating floor in my apartment where a few boards near the bathroom door have separated, leaving visible gaps. The paint at the base of the door frame is also chipped and peeling. I’m preparing the apartment for sale and want it to look clean and seamless. Looking for someone to: Tap the separated boards back together and close the gaps Trim the base of the door frame if the floor is pinched, so it doesn’t separate again Fill any remaining small gaps with colour-matched laminate filler If a board needs replacing, swap one from a hidden area (e.g. a wardrobe) so it matches. There are no spare boards The apartment is vacant and access is through my real estate agent, as I’m overseas. Photos attached. Please include photos of similar work.

I have a stained carpet in one of the bedrooms that's needing a re-patch. Unfortunately, I don't have the offcuts, I'm not sure if you can take one from closets etc. Alternatively, I can have you source it. We can work on the price including sourcing.

I have new carpets and bedroom/ensuite doors are too long for these so need them cut and resealed at the bottom. The three doors are already loose/taken off the hinges. Getting these done is a priority. My laundry door on the other hand is too wide and long and needs hinges looked at. Door is still intact. Might be a tricky one.

I’m looking for someone experienced with flooring/subfloor repairs to inspect and fix an issue with the first floor of my double-storey home. There are noticeable squeaking, creaking and popping noises coming from sections of the first-floor flooring when walking across them. I believe the issue may be related to the subfloor, but I’d like someone experienced to properly diagnose the cause. Task includes: * Inspect the affected areas and identify the cause of the noises * Check for movement or loose sections in the subfloor * Repair/secure the subfloor where required * Eliminate or significantly reduce the squeaking and popping * Advise if any additional work is required The home is relatively new, so I’m looking for someone who has experience with subfloor/flooring repairs and squeaky floors, rather than just general handyman work.

Looking to have hybrid flooring installed instead of carpet. I’ll need two rooms to be done. One is 2.8mx2.8m and one is 3.2mx3.8m so both rooms are quite small. Looking to get this done within the next week and a half before I have to go back to work again. Not sure about what colour to get at the moment as I want to match it with my existing white tiles that I have near the living room. Looking for both service and materials within the price. Please contact me if interested, thanks.

Sand and stain deck, front step and outdoor steps x2

Looking for someone experienced with decking/carpentry to carefully dismantle an existing low-level deck & timber framing underneath surrounding the pool. Please note this is a dismantling job rather than destructive demolition. Materials need to be kept for possible future re-use.

Small deck 1.3m x 1.2m Need to replace the timber boards

We have pulled up tiles in the toilet powder room. There is a big hole underneath, and surface is overall uneven. Needing someone to help repair floor to make flat. Approx 2 square metres. Price is per hour. Please quote per hour and how many hours you estimate. Will it for materials seperately. Also need help working out in storage room How shelving is attached to the wall. Nothing to do to uninstall it, just help us work out how it is attached!

Plinth boards needed around small deck to stop puppy getting under house.

Looking for an experienced carpet repair specialist to repair a small burn mark in our carpet (see photo). We have spare carpet left over from the original installation, so the repair can be patched using an exact match. Job details: * Remove and repair small burnt/damaged section * Use supplied matching carpet for patch/plug * Match pile direction and blend repair as seamlessly as possible * Ivanhoe, VIC Please provide your quote and confirm you have experience with invisible carpet patch/burn repairs.