Find an experienced flooring expert in Marrickville

Sand existing finish and oil merbau decking boards on fence. Approximately 30m2 of timber. Oil supplied. Will require belt sander and orbital/finishing sander, oil applicator (Lambswool Applicator/Pad, Soft-Haired Decking Brush for edges, corners, and getting between the decking boards).

**Relay Existing Laminate Flooring** Laminate flooring was pulled up to repair a leak and now needs to be reinstalled. All boards are already cut to size and ready to go. Looking for someone experienced with laminate flooring to put everything back down and ensure the boards are properly fitted with no gaps.

2 rooms small hallway small living room

Floor has been fixed leveled and laid. Except for two bedrooms and skirting. And only one row left in living room. Pic attached. It’s about 2.5 meters long I think. Some skirting is done but not all. Rooms are roughly 3x3 Ones smaller than the other. The team doing it were great but can’t return to finish it till the end of the week and we need it finish asap. Can anyone come tomorrow? The boards and the skirting is all there . It should be all done in less than a day.

Install new skirting boards 230x18 Pine fj yarrow 5x external corners 7 internal corners

Outdoor deck - replace 1 rotten beam and rotted set lengths (up to 20 connected to beam, not all require replacing). Sand and varnish deck - total area approx 22m2

Hi everyone, I'm looking for someone to manufacture and install a custom timber floor in my **2020 Suzuki Every** in **Marrickville, Sydney**, and would love to get a quote. **Requirements:** * Custom-made timber floor. * Waterproofed/sealed for durability. * Installation completed over a **weekend**. * Floor to be made in **two sections**, connected by a heavy-duty hinge. * One section must lift to provide access to the storage area underneath, while the other section remains securely fixed to the van. * **Four heavy-duty D-rings** securely mounted to the floor as tie-down points. I've attached: * Photos of my **2020 Suzuki Every**. * Example photos showing the style and functionality I'm after. The work will need to be carried out in **Marrickville, NSW**, or I'm happy to bring the van to a nearby workshop if preferred. If you're experienced in van fit-outs, camper conversions, or custom cabinetry and are interested in the job, please send me a message with your availability, experience, and an approximate quote. Thanks in advance!

Need someone to repair a failed patch in an old timber floor in a bedroom. A fireplace was removed previously and the area near the wall was patched, but the current piece appears to be soft timber and has shifted/sunk, leaving a gap. I’d like the existing patch removed and replaced with a proper solid timber floorboard or suitable timber infill, fitted neatly and securely. Looking for someone with carpentry / floor repair experience rather than just general handyman work.

Hi mate, I have a client asking for floor sanding and polishing. They’re hoping to start around the end of next week, beginning of the week after. Access for inspection/quote can be arranged from July 2 through someone who has the keys. Can you please let me know if you may have availability around that time, and what info you need from me for a quote? The total area approximate 50 sq.m. Thanks, Alex

Need to replace a section of heavily damaged carpet within my wardrobe. Size is roughly 1m x -0.55m Do not have a replacement carpet. Would need to be supplied, as close to the 2nd picture as possible.

I need these boards cut in half - no removal no additional work. Just down the middle doesn’t need to be perfect.

Remove and replace vinyl floorboards 100sqm salon Quotes to remove and install And quotes to remove and install and supply please

Install approx 6 Lineal Metres of skirting board in small kitchen & laundry. Skirting already purchased.

Small crack/chip in a single floorboard. Looking for a minor repair only (fill and colour match), not replacement. Just need a quote or someone who can complete the repair.

There is a small burn around 3-4cm square of the carpet. Need a quote to fix it, not sure if it can be a square cut out and replaced or if it needs to be relaid? I look forward reply Have put $10 minimum as payment can be sorted on the day

My outside deck is really warped and hasn't been oiled in a few years. It needs a refresh before the wet and cold winter comes. The last two winters it has swollen up causing water to pool on top of it. It will need cleaning, sanding (if you think appropriate) and finishing/oiling. I'm open to other suggestions on what you think might work. The work should be undertaken on a hot sunny day to make sure everything dries quickly. I will reimburse you for any materials (e.g. deck cleaner and decking oil) but not equipment. The deck is around 40-60sqm.

Must be able to provide material They are from Bunnings and are the glued vinyl floor planks. Just want to replace the ones that have lifted in the photo.

Looking for someone to install around 6 m^2 of flooring. Around 6 rubber tiles and 1x1x0.1m at our Killa boxing gym in Marrickville nsw 2204. We have around 4-5 tiles that are under the boxing ring but might need 2-3 more for installation. We want them glued to the concrete floor if necessary. I need an aluminium step around the water bubbler to avoid spills damaging the rubber flooring. Price includes any extra tiles required if you can supply, Aluminium step around 3m long if necessary and glue

Looking for a handyman to repair a small section of glued vinyl plank flooring A few planks have lifted, separated and need spot replacing. I’m looking for someone who has experience with vinyl plank floor repairs Happy to purchase the material from Bunnings .

Sand and polish hallway floor due to cub boards being removed and floor being repaired. Water based varnish used in the floor. By Friday 13th March, but preference for earlier availability.