Find an experienced flooring expert in East Melbourne

Install direct stick engineered flooring to our bedroom. Floors will be levelled and cleared. Flooring is in next room ready to go. Works will include: -install of direct stick flooring to bedroom and WIR Room size is 3.6 x 3.1 and WIR is 1.3 x2.1 Supplied by me: -4 in 1 Acouslime Glue -Engineered timber flooring tongue and groove Thanks

Install hybrid flooring.

We had a water leak in our bedroom so we’ve had to do some renovations to repair it and I’ve decided to get rid of the carpet and replace with floating floor board. We would need someone that can match the floorboards as close as possible to the rest of the house . We are after the laminate type of floorboards You will also need to remove the carpet that’s currently there Can I please have a quote for the supplies and installation? About 18 m² needed including a small walking wardrobe in that

I need someone to install hybrid flooring in a bedroom; see circled room in the attached floor map.. roughly 4x4 Old carpet has been ripped off and floor is concrete.. just need sanding to remove old carpet glue. I'll provide the hybrid flooring materials

We want to put decking on a portion of our side patio area. Currently the area is a grass/garden patch. The area for decking is roughly 2.37 m x 1.05 m. 2.37 being the longest edge, noting the remainder of the area is less than this by about half a meter. We would also like the height of the deck to be roughly in line with the first or second step. We are looking for high-quality materials and workmanship and durability in the decking. We want the decking to match the existing decking as closely as possible and allow for rain water drainage. There is access to the underbelly of the house that will need to be retained. We are looking for someone to source the appropriate decking material and build the deck for us.

Looking for ekodeck installation. Composite Decking (EkoDeck) 44.5m2 total area. EkoDeck Designer Series decking boards - Construct Composite timber decking to Rear Alfresco and Front Porch. - 90/90 treated pine MGP10 bearers with 90/45 treated pine MGP10 joists to be fixed to existing concrete slab via M8

Need approx 6.5sqm of engineered floorboards put down in our kitchen. We have the floorboards already, but will need the thin acoustic underlay - I can arrange to get this / happy to pay extra if you provide. Ideally done in the next week or so. Apartment is on first floor.

I need someone to install temporary flooring on new floor boards for the ground floor of a new townhouse. I will supply all protective roles and sticky tape required. The temp flooring is the roll out plastic and ram board from bunnings All flooring should sit 50 mil off of the walls. You will need your own Stanley knife. Need it started at 7 AM on Tuesday

📍 VINYL FLOORING INSTALLER NEEDED Looking for an experienced vinyl flooring installer to quote on a residential job. Details: • Product: Armstrong Natural Creations — Milano Terrazzo (3L225884) • Job type: Install only — flooring will be purchased separately • Area: 3.24m² net (4.94m² total less shower cutout 0.636m² and bath cutout 1.066m²) • Location: Hawthorn • Timeline: Flexible, but looking to get done in the next few weeks What I need from you: • A quote based on the dimensions above (site visit welcome) • Your availability Please include examples of previous work and any relevant experience. License essential. Happy to arrange a time for you to come and assess the space. Thanks!

I have two areas that are damaged to burn marks! Looking for a repair of these marks or I’m considering purchasing the vinyl and relaying…

I have a laundry and toilet area to lay some Lino. I have the Lino. Around 8sqm. Thank you Going straight onto concrete

Hybrid Flooring Installation – Small Kitchen I’m looking for an experienced installer to lay hybrid click-lock flooring in a small kitchen. Details: * Location: Hawthorn, Melbourne * Room size: approx 7–8 m² * Flooring supplied (Floor Select hybrid boards from Bunnings) * Boards have attached underlay and click system Job includes: * Laying hybrid boards * Cutting boards to fit around cabinets/walls * Clean and neat finish Small straightforward job – ideally suited to someone experienced with hybrid or floating floors. Flexible timings.

some pavers need to be removed to install a merbau deck in its place 14m2.

We need 520 sqm of timber laminate flooring installed at our site in Ashburton, Need floating installation.

As shown in the pictures, ceiling beam is no longer connected and is sagging. To support the beam, instead of replacing, I would like a decking post replacement. The decking post we'd like replaced is circled in the pictures. From my measurements, we require: - Remove all screws and nails from existing handrail. - Remove the existing shorter post and replace it with a longer post to properly support the fallen external beam. - Supply and install 1x 90x90 treated pine laser-cut post @ 2700mm. Further details/pictures can be provided upon request. Please include airtasker fees in your quote

I’m getting a deck installed and need my heat pump lifted so they can build the deck under. I will need it uninstalled and reinstalled

Remove existing carpets on lounge and staircase and install laminate floorboards Lounge - 4.6 x 6.2

I have approximately 60 square metres of hybrid flooring i need help with installing over existing flooring. I have the flooring and all required tools. There will also need to be furniture moved around as the job progresses.

Installing of new floor boards, the space is approx 46 square meters. All on ground floor. I’ll remove current flooring so the job would simply be to install the new flooring. Would be happy to discuss via a call or you could come out and see before preparing quote! I’ve uploaded a photo of current flooring, and a picture of the sample I have of the flooring I’m going to purchase! Thanks!

I need about 160 lineal meters/25sqm of Baltic pine floor boards installed. The space currently has carpet on chipboard. Boards will be provided.

I need the flooring sanded and repolished to remove some of the surface scratches

Requiring sanding and polishing of floorboards

Task: Floorboard Prep Sanding & Polishing Brief description: Lightly sand, prepare (take out any random staples/leftover nails from carpet removal if any, fill any cracks or holes), and polish floorboards of 3/4 of a house (see floor plan red circle area). Please apply x3 coats of polyurethane as per usual standard. Details: • Location: Doncaster • Access: Easy driveway access, single story, no furniture or obstacles • Tools/materials: You’ll need your own tools and products for prepping, sanding, polishing. Scope: • 3/4 of house (see picture floorplan) • Vacuum/clear up sanding dust before polishing Timing: Around 12 - 21 June. Please quote your total price and confirm availability around 12 - 21 June. Experience with similar timber floor jobs required.

Polish floor boards -128m^2 in total.

I have just removed old carpet and would like to have the floors polished. The floors are quite old, and there are some holes and gaps in certain sections of the rooms that will also need to be filled and sealed.

Need wooden Floor Buff and Polish, including stairs and front door.

Currently polished wooden floor needs to be sanded and polished with matte finish! Area 75 sq m

I need to polish flooring boards

We have 2 small store rooms around 2m x 1.5 meters approx that need the floor grinded down and repainted with a non slip product as it’s a store room for a cafe

Needing the floor sanded and polished in my one bed apartment as the floor is getting water marks from drops of water and anything that moves on it leaves a mark wanting a freshen up

I have 2 bedrooms, both have grey carpet. I found floorboards underneath. Need someone to pull up up the carpet, sand the floorboards and apply varnish to them, to make them look nice. Also will pay extra if you can take the carpet with you to the tip. Thanks

Outdoor decking clean, polishing and oiling

Calvary marble top around 4.5 meter on 90cm

Football Retail Store requiring some construction work. 3G Astro Turf carpet to be removed, and under floors to be polished and treated to match the rest of the store.

Experienced floor sander/polisher to refinish hardwood boards in lounge, stairs, kitchen and possibly light sand and polish to original part of house to refresh boards.

The backyard deck floor got damaged and needs new planks + polishing. No work needed on subframe or joists. Deck floor dimensions 2.3m x 4.6m 8 x floor planks need replacing (90mm wide) Can you also purchase the materials and I will reimburse you. The wood is Merbau.

Sand and polish 75m2 timber floor

I have purchased a property that requires 70 square meters of sanding and water based polish across 5 rooms. Carpet (currently in 2 bedrooms) and tiles (in 1 small office) would be removed pre-sanding. I do not take possession until 7 November but looking to understand cost and and how long this would take. Current timeline of work to be done is Nov 10-14. Quotes are to include all costs including equipment, materials and labor, please let me know if you are available on the proposed dates.

Requiring an experienced floor sander and polisher to restore original floorboards Approx 45sqm Currently covered by floating floor which will be removed prior to needing the floors sanded and polished. Know floors are in good condition underneath (floating floors was a cheap solve to sell the house) Hoping to complete floors prior to move in early Nov. Will have access to the house from mid-October, roughly a week prior to needing the job started.

I have just purchased a property that requires 70 square meters of sanding and stain/water based polish across 5 rooms. Carpet and tiles would be removed pre-sanding. I do not take possession until 7 November but looking for quotes to understand price and how long this would take as we can perhaps get this done before we move our furniture in. Quotes are to include all costs including equipment, materials and labor.

Timber floorboards in small kitchen area need revarnising and a light buff/sand as varnish worn away in high traffic areas Room measurements: 1.9mx 3.6m - Due date: Flexible