Find experienced local fencing contractors in North Melbourne

I need the existing chain mesh fence made good by installing a new post and the loose chain mesh fixed to it and an additional gate installed to match the existing gate- refer to photos. I believe the fence is 2.2 metres in height approx.

5m fence removal and placement

5m paling fence replacement. Can only consider trades with ABN and require written quote prior to engagement. - Due date: Before Sunday, 30 July 2023

4 metre timber fence to be installed - Due date: Flexible

Remove and replace one piece of timber. Attach new latch to new timber. Current gate won’t close properly and latch broken. Materials provided. - Due date: Before Thursday, 10 November 2022

Two fence posts’ tops have been snapped off. These two fence posts need to be replaced and possibly painted to look the same as the others. - Due date: Before Sunday, 24 July 2022

Demolish existing low brick wall and build 1.8 high brick fence. Situated in Brunswick, corner block. Happy for exisiting bricks to be reused where possible, new retaining wall on inside of fence may be needed to support garden bed. Approx dimensions 3.8 x 4.5m, looking for approx 1.8m high, + gate required. Task - Demolish existing fence - Insert garden retaining wall to stop garden pushing fence. - Construct a new brick fence + steel gate to be below listed dimensions. Fence to be either single brick with piers or double brick. Please specify in quote. Please quote for labor + materials. Proposed new fence dimensions are: Fence height - 180 above ground level. Gate width - 110 Brunswick road fence length - 445 Lane fence - 380 Thanks

Backyard fence between two adjoining blocks. Appro 180 height, 12 m long. Old wooden fence to be removed. New fence can be wood or steel. I am considering options - Due date: Flexible

Investigating replacing existing low brick wall with 1.8 high brick fence. Situated in Brunswick, corner block. Happy for exisiting bricks to be reused where possible, new retaining wall on inside of fence may be needed to support garden bed. Approx dimensions 3.8 x 4.5m, looking for approx 1.8m high, + gate required.

I need a handy person to mount several items onto a brick fence: - three wall pots - a foldable washing line - two strings of festoon lights - a shelf with hooks We will need to figure out how to hang the lights, and a trip to the (very closeby) hardware store might be needed. I don't think any of this is complicated but the brick is tough and someone with the right tools and some nous will be ideal. - Due date: Flexible

Remove fence and reposition a colorbond fence about 2metres - Due date: Needs to be done on Tuesday, 14th Dec 2021

Colorbond fence needs to be taken off and remove scissors sitting underneath and put the fence back.

Hello, I need a wire installed at height externally between a span. The wire needs to be able to support up to 30KGs. Both sides of the span are brick so I believe the ideal solution is to drill and install suspension anchor eye bolts at both ends, then attach the wire to these. Both sides must be at the same height (2.2m off the ground) and the wire needs to be removable. I am also happy to have someone simply drill the holes and I will install the anchors and wire for a reduced price. - Due date: Flexible

Hello I would love for you to build me a white picket fence! About me: I just bought a home in Yarraville! I’ve used Airtasker four time’s and always treat my contractors like gold! I’m very easy going, and won’t stress you out. About you! You please must have experience in building fences from scratch. I will please require a folio of your work. I am not a fussy person and know that things can vary slightly, but I will expect a high quality product and would like someone who’s been building picket fences for years. About the fence! - Windsor picket - Spiky fence posts per last picture - fence is 6 metres long and white - there is a pedestrian gate on left hand side. - there is a pedestrian gate on right hand side. - However, the right hand gate can’t swing inwards because there is a step. So it will either need to go over the step, or slide across. Or swing outward if that’s allowed. - I also need a 2 metre tall gate of same style put on the side of the house. Please see the diagram. - First four pictures are my house. Final two picture is what I want it to look like please. Picture five is the correct layout, except their fence is raised. I want my entire fence on ground level. Second photo is incorrect layout, but correct colour and fence post style and picket style. - thank you - job is ETA around July.

Brick fence shape changed

Need one fence installed to enclose the parking in North melbourne . Please message for further information.

Hi, I need help to convert the front porch fence into a openable double gate. Keeping the same appearance but a cut of the middle of the fence, add some hingers and a clip. The handiman will need wielding tool as the fence structure is iron. Location in North Melbourne.

replace wooden fence rail sections over 20 metres

Hi, I need a replacement fence put up at an unoccupied shop along the side as its falling down. Looking for the cheapest option as it's just to prevent squatters from entering my site. It will be around 7 to 10 metres long from the end of shop to gate