Find a local glass fencing contractor near you

Need one glass replace on our pool fence 1140x1120

Had a shotty trade put bad anchor bolts in, they have corroded. Urgently need 1 panel glass removed, new bolts put in, and glass panel put back (let me know exact bolts once you are here - I will go and purchase). Need someone with EXPERIENCE with this exact thing. Must know pool fences. Must be done by Tuesday

I've purchased the Enduroshield, looking for someone to clean the fence and apply it as per instructions. Approximately 25 meters of pool fencing.

I have 2 panels of glass fence to be removed and used in another direction. I have straight line fence and want to make a u shape return in middle to allow for a new sitting area. Will need be glass panels to fit 1200mm high and 3260mm total length. Also need one at 900mm wide. Spigets need to be core drilled into concrete .look at my picture the red line is marked for the new shape. Blue is to remove existing glass.

We require pool fencing glass panel to be cut into half to all for a 160mm gap and reinstalled as per red marking on the attached picture . So a carport can be installed Pool fencing will need new frame less mounts x 2 to cater for the new changes

I need to have pool fencing panels and gate installed to section off a put of my yard. I'm unsure of the measurements so I will need someone to come out and measure first.

We have a 10yo glass pool fence with polaris hinges. The Hinge spring has failed and require replacements and installation

Reinstall of frameless glass pool fence. 9 panels with base brackets. Installed on deck with wooden substructure. We have all parts and bolts etc. Requires 2 people.

I have a Highgrove frameless pool fence and need the glass resealed/re attached into the bracket on the ground and a replacement clip supplied by you if possible to join the corner together. Happy to FaceTime and show anyone what needs to be done but I’ve attached a couple of photos as well. At present the weight of the door which is attached to the next panel is forcing the Glass to fall towards the ground so resecuring the base will hopefully re-stabilise the pool fence. Thickness of glass appears to be different on each side of the corner.

Our glass pool gate hinge is not moving for us and therefore the gate has shifted and is hard to close. Need a certified pool gate / fence person to fix. Thank you

I am looking for someone to remove and dispose of existing wire/timber fence, and to then supply (pick up) and install new pool fence with gate (approx 7.5m) into concrete slab. Existing timber fence - this is easy to remove - needs posts to be cut at slab level and wire snipped. New fence - will join existing pool fence section and will go into concrete slab. Access to property is very good and I’d be happy to assist if needed. I’ll pay for the materials separately - the cost here is for your labour and disposal of old fence.

Silicone that’s holding glass pool fence needs filling/replacing. One glass panel has dropped so will need to be lifted before re securing.

Our glass pool fence gate is struggling to close so we need it adjusted

Hi I need someone to stick some polycarbonate to the pool fence only in 2 places where the gates are, the material needs cutting and glueing or can use zip. ties

I had a pool fencer come and install my glass pool fence but did not do a great job and is tilted. image attached,.

I have a pool gate which needs fixing . The paver the post sits on has moved and thus the gate now doesn’t close properly. Ultimately the post and paver needs removing , the paver re mortared down then post re fix and adjust to close property

Started installing the pool fence and have ran out of time All the parts are ready to go, its protector brand, aluminium pool fencing Just need to hammerdrill a few holes in concrete to install posts and fit the railings Have a hammerdrill but isnt the best, just an ozito brushless with masonary drill bit 6mm 1 may need to be cut to size (either grinder or have a hacksaw with metal blade) Have 6mm anchorscrews for posts, all other peices come with its own screws All tools and gear are here if needed, ready to go Send me your offers!

A 1m panel of our pool fence has fallen (during recent high winds), and needs repairing

Just need someone physical to help take off a pool glass panel then put back on a raised deck. A few other minor adjustments needed on the day but not a lot to do. About 6hrs I estimate. I’m driving down from the Kingscliff area so can pick up and drop off if needed.

I need a tradesperson to fix the pool fence gate hinges at my property in Kew (3101). The pool gate was flagged as non-compliant in a recent safety inspection. The issues are: The gate does not reliably close and latch from any position. The gate does not close properly when a small force (about 250g up or down) is applied near the latch. What needs to be done: Adjust the hinge tension so the gate self-closes and latches every time. If the hinges cannot be adjusted, they will need to be replaced with compliant self-closing pool gate hinges (hinges must be at least 900mm apart or fitted with non-climbable caps). Goal: Make the pool gate fully compliant with AS 1926.1 – 2012 standards so it passes reinspection before the due date. Please provide: A quote for the adjustment or replacement. Confirmation that you have experience with pool safety compliance.