Find experienced local fencing contractors in Beaumaris VIC

We have the paint but need both side of one boundary wooden fence painted - just the new replaced wooden slats. We also have a section that needs replacing with wooden beams or secured back in. Total of 55 wooden beams to be painted on both our side and neighbours side.

I'm looking for someone to build a new simple picket fence with gate as per picture. 18m wide and looking to have simple squared off pickets ~1.4m height (not pointy like they are now (have attached a photo of what we would like them to look like) ideally hard wood e.g cypress.

Supply and install a 1.8 height corrugated fence and auto-gate as per picture using Stratco, Colorbond or similar suppliers. The fence material is either corrugated iron or steel. Attached is example of how the fence should look like.

Backyard fence need replacing. High as possible. Black / monument. Task is to assess and quote.

Looking for someone to help build a timber frame for screening in my backyard. It will be a 9m x 1.8m frame, and will also need assistance with attaching the screening. I will purchase materials and arrange to be ready, however will require assistance with exactly what needs to be purchased. There is an exisiting frame that this new section needs to attach too and finish at the edge of the alfresco wall.

Fence is leaning after heavy winds and rain. Hoping this fence can be saved. Setting budget low as I don't know what needs to be done. Feel free to make an offer at the price to fix or keep the offer low to win the job and quote the work in person.

Replace back fence specification: Supply and install 15m treated pine fence 2m height, use 7x100mm square treated pine posts set in 600mm deep concrete at approx 2.2m apart. 3 sets of railings, bottom railing to be 50mm off ground, 100mm treated palings secured by treated pine green screws. Remove old fence and clear site.

Remove fence one (grey, horizontal slats), including posts. Remove fence two (black vertical slats) and reinstall it where fence had been.

Put up chicken wire on bottom of gate to prevent dogs getting out

Gate needs to be lifted slightly -using the hinges? to stop it dragging on the ground

Build 6 metres of fence standard height :: see picture = also remove and dispose of all existing fence materials. The job is replacing the current black fence in the picture.

Build an L shaped deck on aluminium posts/base with composite boards approx 1ft off ground & 38sq metres total. Trees and area will be already cleared.

Install garden gate. I have the two slat garden gates here; other materials will be reimbursed. Installation on the side of the house. 2 panels for one gate. One panel needs to be static and the other panel is the gate opening and closing.

30 m of wooden fence with lattice on top with Jasmine wound through, jasmine heavy and now lattice leaning and needs support to straighten.

We have 2 house posts that connected to an upstairs deck that have rotted at the bottom and need to be replaced. Airtasker will need to arrange the replacement posts / parts to replace it with.

Scope of works: Remove and replace 6 palings on back fence that was damaged due to bad weather. Remove existing trellis and re-install 15m of trellis. Trellis will be provided and any other materials needed (nails) No painting needed No rubbish removal needed

Repair or replace timber paling fence between 2 units Single story. Existing fenceMeasure: width 3m length 2m Removal of existing fence and posts if replaced

New/second hand posts needed. 1.95 metres high.

7 metres of fence at 1.9 metres high. We want to have palings face our side of fence.

install 15 metres of fence extension to a paling fence. extensions are 2400 x 400 and have the verticaql pieces already attached.