Find experienced local fencing contractors in Cheltenham VIC

repair 6-7m fence 3 new posts and remove rubbish

looking for a quote on the cheapest fence. Just needs to keep a dog in and secure (so nothing with gaps please). Maybe wooden paling would be cheapest and best suitable. Please provide quote for the following two measurements: Will be choosing one of them. Carport: 309cm x 195cm High Courtyard: 113 x 230 cm High Hoping to get installed on Friday the 13th or Saturday the 14th September.

Set new 1.8 m fence & remove the old one roughly 6-7 m long.

Repair or build a new fence, approx 3-4m

Fix or replace an existing fence. Size is 17.2M approx 'Standard' 1.9m high fence. HWD posts. Treated Pine palings. - Due date: Flexible

Need to fix the side fence. Materials to be supplied.

Fence construction Corner block, so need fence on 2 sides plus the corner. Roughly 35 meters in total. A small section of fence was constructed previously using colorbond steel sheet, happy to keep going with colorbond steel sheet, flexible with switch to tall wood fence too. I will supply all material based on your ask. Please provide quote on whether your service include removal of existing basic fence. So fence construction, removal of existing basic fence, please advise if I need to cut down trees which is close to the fence. Will upload some photos later.

I would like to extend my existing brick fence which is 0.9m tall to 1.8m tall ( basically add brick pillars 3 or 3) , so I can add colour bond panels in the middle.

Remove concrete drive way 18m long x 4m wide . Half of the concrete section is under carport. Remove brick fence and footing 12m long x 1m high

Take old timber fence and install new one - around 40 m between 2 houses

Have a merbau fence with electric sliding driveway gate and pedestrian gate. It looks like some of the posts have rotted resulting in the fence leaning and the driveway gate not working as it hits.

I have two posts that the gate swings on that has rotted underground. I would like these replaced please. Height of post from ground: Between 130cm and 140cm

New aluminium fence being installed. PreWiring already done to the street. Run the cable through the post. Supply and install electric strike

Hi, Looking to have posts put in to build a 2.7 meter screening fence around the pool - in front of out existing 1.8m wooden boundary fence. 23 linear meters. Galvanised steel posts need to be 900mm apart per manufacturer advice. Fascia boards are WPC 5400mm long, 13mm thick, 98mm wide installed horizontally. https://www.ezywood.com.au/composite-screening.html Thanks, Richard and Tanya Vaughan 33 Swinden Ave Cheltenham 3192 0410 409 948 - Due date: Flexible

I need some child safety fencing (equivalent to pool fencing) installed. I will purchase all materials myself. Note: if you would prefer to quote for supply and instal that is also ok as I have not yet purchased the materials. Details: -total 21m of fencing with a gate at either end -ground surface is a paved carpark, mostly level, with a slight grade at end -type of fencing to be installed viewable at: https://www.oxworks.com.au/pool-fencing/aluminium-pool-fencing/ - Due date: Before Friday, 9 February 2024

Supply and install lattice privacy screens for fence. - Due date: Flexible

Front brick fence has broken due to roots in the ground and required to be fixed and repaired - Due date: Flexible

Mark the front part of boundary line. - Due date: Flexible

Im looking to have a front fence installed. I would like all my fences done however the front and side are the priority. I have listed the dimensions below. I am not overly fussed with materials as long as it is decent quality. I - Due date: Flexible FRONT FENCE Description: Supply and Installation of Front Feature Picket Fence: - 12.1m @ approx. 1.5m High - F7 Treated Pine Plinth Board 140mm x 45mm. - F7 Treated Pine Rails (70mm x 45mm) 3 Rail Framework. - Treated Pine Flat-Top Pickets 70mm x 20mm with Approx 10mm Spacing between pickets. Supply and Installation of Fence Posts - Cypress Pine Posts (125mm x 75mm) x 7. Installation of New Concrete Pad for Sliding gate track - Excavation and removal of soil - Installation of Re-enforced Concrete pad 3.5m long x 300mm wide x 150mm deep Cost includes installation of small Sleeper timber retaining wall behind concrete pad to keep debris away from track. Supply and Installation of Sliding gate. - Galvanised Steel frames clad in Treated Pine Pickets, F7 Treated Pine Plinth Board to match fence: - 3.2m wide x Height to match the rest of the fence. - Cost includes Metal Guidepost, Gate Track, Guide Block, Gate catcher and Gate stop. Supply and Installation of Motor to Automate Sliding gate. Side Fence Supply and installation of Treated Pine Paling fence along Left-hand side of property: - 39m @ 1.95m High - 1.8m Treated Pine Palings above ‘Fat’ Treated Pine Plinth Board 200mm x 50mm - Treated Pine Rails 75mm x 50mm (3 Rail Framework) Demolition and removal of existing fence. - Fence line to be cleared before commencement of work.

Need 5 broken fence palings to be replaced. We need the palings supplied as part of the job but NO PAINTING required. Supply and install only. Measurements of broken palings are: 2 Palings = 850mm x 150mm x 12mm 1 Paling = 1.3m x 150mm x 12mm 2 Palings = 1.8m x 150mm x 12mm Job location is Cheltenham. - Due date: Before Friday, 20 October 2023