Find experienced local fencing contractors in Bentleigh East

I need to replace the existing fence with the new timber paling fence. Standard height 1.8 m. Approximate length of the property boundary is 42.6 m.

We have a townhouse property and would like to get a quote for fencing installation. The project includes: * Front yard fencing * Driveway gate (manual operation only, no motorized or automatic gate required, lock and keys required) * Raising the height of the existing shared boundary wall with the neighbour by installing fencing on top * Pedestrian gate (no ring bell needed, but lock and keys required) *Please don't forget that the small section above the mailbox also needs to be raised to 1.5 m.In short, all visible parts should be built to a height of 1.5 meters. Requirements: * Total fence height not exceeding 1.5 metres * Black aluminium picket style similar to the attached reference photos * Durable and low-maintenance materials suitable for outdoor use Please provide an estimated cost, installation timeframe, and whether a site inspection is required.Because this involves a shared boundary wall, we need to obtain our neighbor’s written approval. If possible, could you please let us know what work will be done to raise the shared wall and what the finished result will look like? A rendering or visual mock-up would be greatly appreciated. The property is located in Bentleigh East, VIC. Thank you.

Our bamboo style fence has blown down in the wind, just needs to be put back up and fastened tightly so it doesn’t fall down again.

Replace fence (roughly 2m) with gate.

Need to build a boudary fence for a house in 3165 post code in victoria. Need a quote after visit site

Timber paling fence to be erected on 3 boundaries. Old one to be removed.

I want to install some type of fence that needs to be atleast 100cms tall with no horizontal bars for my kid to climb on, on an opening that is 250cm wide. I checked all the readymade fences and they are too short in height and not sturdy enough

Install the side gate. Only gate available and nothing else.

Install a Babelio baby gate with hardware at top of stairs

Replace timber fence post and also replace broken paling with new ones. Yellow metal post can stay

I need installation of a front gate at my house. I will source material Myself whatever you need for this installation and I will pay you labour for This task. It will Be sliding aluminium blade gate 1.5 high .with motor.

need a quote to install a **40 metre timber paling fence** for left boundary of the lot: - Height: 1.8m - Straight line - No decorative features - Ground: level - No complex site obstacles -removal of the existing fence -requiring you are fully insured

We currently need hire 1-2 tradies who have experience on timber / colorbond fence installation. Can do full time / part time.

Require an experience fencer to remove a section of property side fence and patch a gap in the same fence.

need to replace old fence as shown in photos below

X2 fence posts are leaning - need repair or replacement. One of them is inaccessible because of shed. Therefore need new one installed just before that one to take load.

I need a guy to give me a hand to install a front fence in Bentleigh East Tuesday morning. There is a sliding gate, pedestrian gate and one fence panel. Should take 6-8 hours and can pay cash $35/h. Just need a hand to help me put them in place. There is no need for a tool experience! Must be Tuesday morning around 8.30 am

We have no front fence and want a brick fence to match same used on the house. Its roughly 15m length would like a brink fence built. Will need to level grass. Flexible with date

Looking for a qualified or experienced fencer to replace a section of our side boundary fence. Scope of work: - Remove approximately 7.5 metres of old timber fence (existing section) - Supply and install a new 19.5m timber boundary fence - Minimum height 2.1 metres - Include a fence cap for a clean, durable finish - Ensure straight alignment, strong footing, and tidy workmanship Painting: - Paint the full 19.5m fence - 1x primer coat + 2x exterior top coats Requirements: - All materials, tools, and removal equipment to be provided by you - Remove and dispose of old fence materials Access: - Access along the side of the house is easy Timing: - Ideally completed in the next 1–2 weeks What I’m looking for: - Someone experienced with timber boundary fences - Good attention to detail (clean posts, even height line, neat capping) - Clear quote outlining labour + materials Optional (if you have the right equipment): - Remove 9 cypress stumps located along the fence line (Please let me know if you can include this in your quote.)

Need a steel fence installed between 2 townhouses , 4 posts , 3 panels , 5.4 m in length , 1.5 high , post 100mmx100mm