Find experienced local fencing contractors in Frankston

Looking for an experienced fencer or handy tradesperson to build a new timber front fence with a pedestrian gate and to pour the concrete footing for a rolling gate I’ll install later. The job: Build a new front fence about 11m long and 1.95m high on flat ground Install a pedestrian gate Pour the concrete footing for a rolling gate. I’ll install the gate myself later so for this job I only need the footing done (no gate or motor installation). The opening will be about 4meters wide and I’ll confirm the exact footing size before work starts. I’m happy to take your advice on it. Fence style: 125 x 125mm cypress pine posts set in concrete, three rails a plinth along the bottom and 100 x 12mm treated pine palings in a single layer with small gaps (not overlapped) I’ll remove the old fence and trees before you start so the site will be clear The land is flat and soil is sandy easy to dig. Materials: I’ll buy and supply all the materials posts bagged concrete rails plinth palings and screws Please bring your own tools and equipment including something to dig the post holes I’m happy to help with labour for the days required such as carrying mixing concrete and holding rails so please factor that into your quote. In your offer please include your price for labour when you could start and photos of similar fences you’ve built if you have them.

I would like a gate built and installed please see photos. It needs to go close enough to the ground so there is no gap where the steps are. I just want it to blend in the with fence. It needs a high latch and I only want to be able to open from the inside. I do not need it painted - I will do this myself.

Install new fencing to part of boundary Option2 price 39m of new fencing

2 x fencing jobs. First to install a fence and simple gate across a 5 foot width at side of the house. Second to repair this other side fence that is currently leaning to one side.

Fence needs fixing repaired stability

Fence needs stability and repair

Need to put fence post in and cut it

Looking for a quote for someone to construct approximately 5.5 metres of fence for a chicken run, including attaching a gate which I have. See mock up.

My neighbour and I are looking to share the cost of a new fence. The original one there is 2m. There is a small section at the bottom acting like a retaining wall 1, sleeper that goes for about 15m There is about 15m of fence lattice The fence is 24ish m long

Our dog has chewed at the fence and we’re moving out - Need to get it repaired just enough for it to not be an issue with the landlords, if that’s just making it look presentable from the property’s side of the fence or replacing the fence piece open to suggestions.

I clipped the post with my ute and it’s ripped a section out of the face. It’s not load-bearing since the gate is sliding, so I’m after a clean repair—either cutting in a new piece or rebuilding the section—and matching the paint so it blends in properly.

Base panels on fence either side of a gate have separated from fence. Need to be reattached. The soil may need to be pushed back inside the fence. Panel along the side of front porch has dropped off, but still attached at one end. Needs to be reattached.

We need a compliant pool gate, exactly like the one shown in the first image. The last two pics are where it needs to go. Approx 148cm. Any questions please let me know! $$ is only for labor and will pay extra for material.

Want to install electric driveway gate Fencing will be done eventually, however looking to only install gate Will need to dig a trench 60cm deep, approx 10m for electricity to connect Just putting feelers out at this stage. See first two photos for photo of gate (since dismantled) and third photo for where it will be installed

Need quotes for front fence/gate and 1 x side fence. Interested in a few different timber options for front.

see prior note. Main thing would be to check if you can use the posts still. The fence is tapered to the front. Current fence is probably 165cm height in the rear half. ?Much more cost to make taller

Front part side fence needing replacement, approx 20 meters.

Front gate supply and installation for child safety

I would like a front fence with gate I can supply Merabu

Looking for someone to build and install a small waist-height pedestrian gate (around 1 m high) with a short matching fence section between a brick wall and fence post, roughly 2.1 m across. The gate will go where the red line is marked in the photo — the spot where the photo was taken will be a dog area, and the section on the other side of the new fence will be decked. Gate should swing toward the dog side and use a simple lift-up latch. Treated pine or similar outdoor timber is fine — just needs to look tidy and functional. Please supply all materials