Find trusted local electricians in Malvern VIC

Licensed Electrician Needed To Repair and Rewire Several Lights I’m looking for a qualified and licensed electrician to complete the following work at our store in Malvern: Inspect and repair one ceiling light in the window display that is not working. Rewire five lamp bases from India that have been stored out the back for several years because the wiring no longer works. The cords, plugs or fittings may have been damaged over time from moving the lamps around the store and regularly changing the lampshades we sell. Please repair or replace any worn or damaged electrical components as required. Wire two decorative metal star lights imported from Mexico. These currently have no electrical wiring and will need to be fitted with wiring, lamp holders, cords and Australian-compliant plugs or connections. Test all items to ensure they are safe and working correctly. Please supply the necessary tools and standard electrical components. Any significant additional parts can be discussed before proceeding. Please only make an offer if you are a licensed electrician with relevant lighting and lamp-rewiring experience. Location: Malvern, Melbourne

Budget is indicative kindly share your quotes. I need a licensed electrician to supply and install three new smoke alarms in my apartment—one in the living room and one in each bedroom. The alarms must comply with current regulations. Please also remove and properly dispose of the old alarms.

Hi. Looking for someone who can install air conditioner.

Seeking someone that can safely change flickering down light in our double height entrance. Ceiling height is approx 6 to 7 metres high. Easy access to the entrance from the street front via double front door that open directly onto the street. I will supply the replacement light.

We have had 2 motorised blinds installed but the power cord that was wired up when we first built the house is different to the power cord installed on the blind. Job is to change the house supply end of the wire to match that of the new blind as seen in the pictures.

Walls are exposed - need sparky to install 4 down lights and relocate power point prior to walls being sheeted in bathroom - have keep budget small as to quote on arrival or via phone call

Hi seeking licensed electrician to repair or replace a light fitting with electrical certicate ( globe pushes in but doesn't hold ) with similar as possible - please include when you can do it - will accept first reasonable offer - thank you

Need 5 down lights with new globs and two are broken. Install two power outlets maybe UBS . Power to show fan problem.

Electrical Requirements -Install Nobo heater in bathroom (power supply to be chased into wall). -Remove and replace light fittings in the sunroom and dining room. -Remove existing light fitting in the living room. -Remove kitchen downlights and install strip lighting. -Relocate power outlet in bedroom (solid wall). -Install additional power outlet in the kitchen pantry. -Remove existing bathroom exhaust fan and install a new fan ducted to the roof. Install rangehood. -Remove existing bathroom heater. Owner-Supplied Items - Lights -Nobo heater -Exhaust fan Electrician to Supply -Power outlets and associated electrical materials.

An electrician with long ladder to supply and change a shop LED panel light 1195x295mm 4-5m high with warranty

Ourdoor light fitting has fallen off hanging steel rod and needs to be attached in and clipped on.I have attached pic.You will need high ladder.Need a handy man

Put in 4 double power points

The cable on our blender got burnt by a toaster - we need someone to supply and replace the plug and wiring

Hello! Looking for a friendly electrician to do some final jobs at my office! - remove a GPO from wall (see photo) - install a pendant light (wires are ready to go) - install a wall sconce (wires are ready to go) - install a pendant light (wires need to be done, there was new down lights put in the roof so should be easy to access) Being done safety and correct and supply an electrical safety cert!

Replace broken electrical switch with a new one.

Socket switches on 2 lamps broken and need replacing. The switch is broken- won’t click out to switch on light.

Our switch board flicked the safety switch overnight. We flicked it back but it only lasts 10 minutes. We think our fridge is dying but we aren’t sure.

Looking to have a sauna assembled post-delivery. https://alpinespas.com.au/saunas/traditional/lucca-sauna-3-person-outdoor-traditional-finnish-sauna Electrician enlisted to do the wiring separately, this is purely assembly. Has been indicated that the sauna will need rubber under it to support and level it +/- plastic shims, as the bluestone is slightly uneven. Photos of the area attached - Bikeshed has been removed. Sauna comes with all requisite parts.

I need an electrician to run a new circuit for a split system. Appx 8m run, external in conduit is fine straight from switch board. Terminate next to existing systems isolator where I'm installing new unit. There is room in existing switchboard. Please bid with your total including materials and date you can come asap.

looking for a licensed electrician / experienced technician to complete the following work in this order: 1. Install a new double power point (double GPO) behind where the TV will be wall mounted (centre of wall) 2. Relocate the existing TV antenna socket upward to the same location behind the TV 3. Wall mount a 75” Samsung TV using an existing fixed wall mount (if you are able to do this) 👉 If you are not able to wall mount the TV, please still provide a quote for the power point installation and antenna relocation only. Details: • Apartment in Malvern 3144 • Wall is plasterboard with metal studs • Existing power point and antenna are lower on the same wall • TV wall mount will be supplied • Looking for a neat, compliant, child-safe finish Please include: • Your qualifications (electrician licence if applicable) • Availability • Quote (electrical work only vs electrical + TV mounting, if applicable) Thanks!