Find a local Tasker to set up your internet in NSW

We are experiencing random internet dropouts that last about 1-2 minutes on our NBN HFC 500/50 service. The connection disconnects completely and then reconnects on its own after a short period. Sometimes it remains laggy until we restart the modem and then it is fixed for a short period. This instability was also present with our previous ISP (TPG), though it previously showed as ping spikes rather than full disconnections. After changing providers, the issue remains. Dropouts occur at various times of day and across multiple devices, and are not limited to peak usage. We are unable to determine whether the cause is modem-related or line-related, and would like signal levels, line stability, and HFC infrastructure to be checked to identify the root cause.

My laptop suddenly won’t connect to the Internet. Nothing has changed and all other devices in the house will still connect.

Set up internet and phone systems within the office

I have just moved to a new property which supports Opticomm. I have transferred my previous nbn modem to Opticomm but not able to get it working.

Someone who can run Ethernet cables to hard-wire our laptops in our office. We’d run four Ethernet ports from the area to the desk, use patch leads throughout. We may also need a 48-port switch and possibly Ethernet adapters for some devices.

We have just installed NBN in our home and have subscribed to TPG as our internet service provider. We need the Netcomm NF20MESH router and Netcomm CloudMesh Satellite NS-02 to be configured and setup

We need office internet setup at Marrickville office. - cabling to desks with labels to switches - procure and recommend router and switches (second hand if possible) - provide us with config files - failover / load balancing on WANs (FTTP DSL + 5G router) - neat install and documentation

Last night, the Wi-Fi in my home was working in the living room, but it wasn’t working in the master bedroom. So I tried turning the modem/router off and on again, but after that, the Wi-Fi completely stopped working. This morning, I bought a brand-new modem/router. I connected one end of the cable to the modem/router’s DSL port, and the other end to the wall outlet labelled “IN.” After connecting, only the power light and the Wi-Fi light turned on. The modem/router appears completely normal — it shows up in the Wi-Fi list, and I can even log in to the TP-Link web setup page without any issues. So the problem is clearly that the modem/router is not receiving any DSL internet signal. I have already tested every wall socket in the house, but none of them provide a DSL signal. I also spent about 30 minutes on the phone with TPG technical support, but they were not able to fix the problem. Given this situation, the only solution is for a technician to physically visit my home and check whether the internal cable is damaged, loose, or worn out — and then repair or replace it as needed.

Need to set up a d link mesh. Internet extender

I need someone who has experience with routers and switches to attend a site in Mittagong to diagnose an internet issue. It should be a 10-15 minute task.

I need someone to hook up a new router and set up a mesh network in my home. I have all the equipment, just need it hooked up.

Hi, issue is no internet on router. Showing connected to modem. Checked with provider TPG said everything ok still no internet. Help!! To configure the router. Thanks

Have an eero router, origin broadband Have had various issues and just returned from a month away working to red light that I can’t troubleshoot.

Purchased new modem and seeking help to set up and have internet working

Store internet is not working and require urgent assistance , price can be negotiated once task taken

I accidentally reset the Deco master that was connected to my landlord’s Deco app. He’s overseas and I can’t seem to get it back running. I am in desperate need to help from someone who is familiar with connecting Deco master, Nbn box and modem!

Need someone to fine tune internet network. Currently running 2 BE9300 Routers. I have FTTP with a 1GB connection but somehow my network drops to 100MB and after internal routers and network switch comes back at 1GB

Post blackout issues with connection between router internet and chrome cast. Have done multiple factory resets, called all relevant companies and can’t fix. Internet connection working.

Hi, I need help setting up user access and internet connection for my existing Hikvision CCTV system on the app. I dont have admin passwords for the system .all the cameras were installed a few years ago and are working fine — just need assistance with getting them connected them on internet and accessible through the mobile app as setup user and password..

My laptop internet speed is around 1.8 mbps yet every other device on the same wifi is 90 mbps, there is some issue with the laptop’s connection. It also won’t download the software update. It’s a Republic of Gamers laptop running windows 11.