Find experienced local carpenters in Pascoe Vale South

small studio room in my backyard. table inside the room which we can't take out. size is 2 m x 3m. need someone to put venyl sheet in the room floor. I also have adhesive to paste the sheet.

Need to build a new white cabinet for the kitchen area to replace the current one, which has a brownish color (as seen in the second photo). *Height: 2.52m *Width: 2.1m *Depth: 0.6m

Decorative cornice to be cut and hung. 6 lineal mts - 5 cuts. Materials are already onsite. Must have experience with decorative cornice as this is completing most visible wall in house.

Step length is 2725mm approx and height is 150mm approx and then gets higher to around 200mm. See images. My cats can't use the cat flap because it's too high for them to jump in and out. So maybe step needs to be around 270mm out. See photos. Materials can be maybe wood frame with engineered decking. I'm not sure. What ever is more reasonable but stylish

Have three window frames that need to be sanded down, stained (light colour) and polished. Stain/polish can be provided also. Must have previous experience in sand/polishing.

Looking at quote for supply and install of subfloor insulation of our one store home. Not sure of exact flooring space, see floor plan attached. Please advise the type of insulation you would be installing. Gate access to under the house.

Lifetime 2.1 x 2.1 x 2.7 plastic garden shed. I think it will take around 4 hours to complete and I can support at times when required (but not the full 4 hours). https://www.bunnings.com.au/lifetime-2-1-x-2-1-x-2-27m-desert-sand-polyethylene-plastic-garden-shed_p3318106

I have 4 10 mm toughened panels have some scratches can be polished. Want them gone ASAP 2@900x2050 1@1000x2050 1@1100x2050

Need some cabinets, benchtop and built in sink (I'll supply the sink) for laundry. Allow space for the washing machine. Small space. In Pascoe Vale South.

Hi, I need a step built here. Please see images. Length is 2725mm approx and height is around 150mm and then goes higher to about 200mm. My cats can't use the cat flap because it's too high for them to jump in and out. So like a step that's around 270mm out. See images

Marble stone is in Campbellfield. Needs to be picked up, cut up and installed in pascoe vale. The measurements of appliance bench are 1913mm (length) x 366 mm. The stone is: offcut: light emprador marble 2000x600x20mm (1.2m2) size: 2cm.

1) Remove the existing old carcass (450mm depth) and replace with 600mm depth cabinets. Sink already removed. 2) Extend wall cabinets to be higher. Keep carcass. Replace all doors. 3) Install new cabinets above the fridge 4) Install new void for dishwasher (no dishwasher currently) 5) Install new void for microwave (no microwave space currently) 6) Replace all doors and hardware (melamine for all) Sink, oven and fridge have already been removed. I will replace benchtop when finished. Job in Pascoe Vale South. Start asap. Thanks - Due date: Flexible - Due date: Flexible

Deck needs to be sanded back and then retained- would like the quote to include materials - Due date: Flexible

Sand and oil deck- repair if required in any section. 15 x 3 m approx. tasker to provide materials - water based oil preferred. - Due date: Before Saturday, November 25, 2023

I have instructions and materials to build a wooden compost bin. The wood may need to be cut down to fit specifications. - Due date: Flexible

Looking for a qualified cabinet maker to install a modular kitchen. (Not a custom kitchen) Kitchen is in sections of each module (pantry, fridge, drawers etc) and needs to be installed to fit the space correctly. Task will include: •Fit modules to kitchen space •Fit and install laminate bench tops to size •Fit overhead cupboards •Ensure kitchen cabinets are level •Fit kick boards to adjustable legs •Hang range hood •Fit shelving in pantry (interested in various options here) •We would like you to provide bin drawer options for a 30cm wide opening •May need to fill in a small gap in the cabinetry U shaped kitchen 3.3x3x3.3 Photo attached is of kitchen that will be installed in different formation - Due date: Needs to be done on Tuesday, 29 August 2023

I need a carpenter or someone with carpentry skills to replace round 4m of rotten fascia boards (provided) and prop up/pack out the corner of our roof to straighten out the roof line. - Due date: Before Saturday, 29 April 2023

Install 2 privacy passage sets and 1 regular passage set to internal doors that have old passage sets on them. Straighten 4 normal and 1 corner kitchen cupboard door. - Due date: Flexible

Have recently embarked on a renovation where a vanity is being installed underneath a staircase. Need to have the ability to gain access from the side, namely cutting a hole in plaster, affixing architraves and doors. All materials will be available. Photo of concept attached for reference. Approx width 1200mm with two swinging doors. - Due date: Flexible

Hi - I’m looking for a professional carpenter to install a stone bench on brackets on the exterior of my servery window and also install timber battens on my island bench - Due date: Before Friday, 10 February 2023