Find experienced local carpenters in East Melbourne

Install cornice(provided) roughly 4m - corners need to be neatly cut as they are already installed

Treat timber fungus and rot on external deck stairs.

Hi I need an outdoor two seater hanging seat frame reinforced at the top (currently wood but concerned about rotting so thinking steel) and then the hanging chair attached to the frame then sanded and painted. I also need wood deck fence railings nailed down as they are wobbly.

A building surveyor has informed me that I need make sure the weight of the roof is being distributed evenly. Requesting a qualified carpenter to supply and install 3x (or your recommendation) of roof struts from the internal top wall to the roof purlins. After works are complete this will be signed off by a surveyor.

if i provide under floor insulation for 35 sqm what is cost for installing poly foam

Need a small office kitchen fitted with cabinets, bench top and splashback

Hi, I want to get a garden shed installed. The shed is 1.76m x 2.1m (3.7m^2) with steel frame floor. See image attached. The shed is flat packed.

Build a table for jewellery making

I need someone with a table saw and experience with woodworking to help me cut some wood I’ve already purchased. If possible, help fitting threaded insert into the wood is preferable too. The initial quote request is arbritrary as I will need to talk it through with the person to figure out how it can best be done/what needs to be done.

I need some to assemble the following shed & 2 x 3 tier shelving to be placed inside shed . Shed is to erected on pavers against side of house as per photo. Cloths line will have to be removed also https://easyshed.com.au/products/narrow-slider-garden-shed-3-75m-w-x-0-78m-d-classic?_pos=1&_sid=0c5368d80&_ss=r

Hi, I have just completed constructing a tall 4.5 x 3.75 easy shed (workshop) on a concrete slab. I am up to completing the doors but I have ran out of time. Are you by chance able to finish the door assembly for me?

Need an experienced carpenter to fill up existing weather boards wall down to the ground as in the photo without any gap left, the length is 4 meters, highest side is approximate 470mm. Also need a new metal frame wooden lockable fence gate about 900 L x1500 H mm to replace current broken one, locker much be accessible from both sides. please quote for them separately. Price includes all materials, labour and disposal please, thanks.

Experienced Door Carpenter - ABN required 3 French doors to be “shaved” so they open easily as they are currently “sticking”. 2 x 2.5m & 1 x 2m A secondary job to align a cavity door so it locks as it once did. $ estimate is obviously not correct. - Due date: Flexible

I have made a cantilevered bench which is approx 8m long and 300m deep. We bought the terrazzo (30mm thick) and it is being precision cut to size, including mitres. Basically it needs to be precisely stuck down. The front face of the bench is 160mm deep (pre-cut, too) - which is mitred and is to be joined to the flat. There is also a base plate under the seat which is 200m (terrazzo) and this is to be stuck under the seat the whole length.

Looking for someone to measure and build cabinetry/benchtops in a laundry.

Fully sand back and re-stain (in a lighter colour) a 1.2m x 2.4m solid dining table. Can provide space in our garage for you to do the work there over a few days or as required.

We would like our garage door fixed and sealed. It has water damage.

Need carcass framed out under custom concrete bench and doors framed for inbuilt bbq (for our clients). Also attaching timber radials to door frames. All materials will be provided / at site for you.

Few things need doing - 1. The existing wooden window frame needs to be shortened. Nothing too fancy. We are going to put a shower enclosure and it will go over the window - which is fine. But from aesthetics point of view will need about 60cm of the window covered vertically. Architaves need to be placed back on after the work. Adjust the fly screen as well. We are not touching the glass. 2. Take the electrical plate (no wires or connections sit underneath) and place a wooden patch over there. The surface is required to be even basically. 3. Cut the kitchen cabinet in whatever way is cost effective. So that I can accommodate a 1710mm fridge. The current space from the floor to the ceiling is 1700mm.. just those 10mm. Don't mind loosing the last rack of storage.

We had our weatherboard house re-stumped and to do so they removed the base boards off the perimeter of the house. I would like a qualified carpenter to come and replace them for us. Price is negotiable, I am happy to pay for the wood separately. - Due date: Before Sunday, 11 February 2024