Find experienced local carpenters in Fitzroy North

Four years ago I got the bright idea to grind the interior floors of my apartment myself. The results were.. mixed The slab was ground down to expose the aggrigate and several coats of a clear self-levelling epoxy were applied. As you can see in the images, there are grinding marks in some places, with the kitchen where I first started, being the worst location. The floor is also uneven to a degree, the self levelling epoxy did not eliminate this and many of the edges of the rooms are slightly higher than the centre. How much of an issue this is, im not sure. I am looking for a professional who would be able to provide a solution, preferably several options to choose from, to improve the appearance of the floor. This would include quoting for an entire apartment refinish/refurbishment of floors to section based refinishing for the kitchen and/or hallway areas. I have included some images as well as the floor plan of the apartment with the flooring present in all rooms minus the bathroom and toilet. Please also note the apartment is on the second floor of a 1970s brick walk-up. Thank you, Adam

I need: Front gate fixed - has swollen and now doesn’t shut easily. When it rains it doesn’t shut at all. Two longer back gates also sticky. Want these fixed so they open and close easily. Part of Planter pallet wood needs replacing. Sheeting along back fence needs to be reduced in places. Happy to pay / reimburse for any materials purchased. Can provide videos

I need a wall-mounted melamine particleboard cabinet in my laundry narrowed so I can stack a 600mm washer-dryer on top of my existing washing machine. The cabinet's side currently protrudes into that space and blocks it. The clear width beside the cabinet is 596mm. A 600mm appliance won't fit, and it needs clearance to slide in and not transmit vibration into the cabinet. I need the clear opening increased to at least 615mm, ideally 640mm — roughly 25–45mm off the cabinet's width. The job as I understand it (tell me if you'd approach it differently): 1. Take the cabinet off the wall (I'll empty it first) 2. Cut down and narrow the cabinet and reseat the side panel 3. Rehang and refix securely (it sits above head height over the appliances) Photos attached showing the cabinet, the gap, and the measurement. In your offer, please tell me: whether my scope is right or you'd do it differently and rough time on site.

garage work bench (fixed in place) has 3 rails (75 w x 35 thk) under benchtop - need to trim 20 mm off thickness (x 600 long) underside of 2 front rails to fit appliance

Rebuild a cupboard and a wardrobe

As per discussion in our chat

Requiring a reliable cabinet maker for our house renovation. Kitchen cabinetry which flows through to our lounge room and also two bathroom cabinets. Measuring up the space required end of May, with install June / July timeframe

Looking for someone to fit magnetic cabinet catches to 4 kitchen cupboard doors. All hardware supplied and ready to go. You’ll need to provide tools to complete the task. The doors are birch ply and sitting slightly out of alignment, so I need the catches positioned carefully to ensure a firm close. Straightforward job for someone with a drill and a bit of cabinetry experience. Should take 30–45 minutes. I will be home to show you the job before you start. Photos are for reference only.

A shelf to be added to a hall stand for shoes Blackwood or tassie oak Need to asses 1400 x 600 x 20 With Brass pins

Supply and build ledge - approx 2 m x 350 deep in solid timber and stain to match other

Hi, I’m looking for someone to install a simple vertical moisture/splash barrier around parts of my house perimeter as per the attached markup and photos. Currently have re-stumping failing due to moisture ingress in the soil and need to stop water ingress from driving rain etc. Scope is: – Install HDPE/PVC vertically along soil and concrete edges respectively. – Approx. 27m fixing PVC into concrete – Approx. 5.9m fixing HDPE into soil – All fixing into concrete – Fixing approx. 450mm into soil where it is soil – Cut in PVC sheeting to allow ventilation under floor. – Some minor soil reshaping reinstatement – Fixings and materials will be supplied. House is in Fitzroy North. Are you able to quote cost and hours please. Keen to have this completed next week (w/c 04/01/26) Thanks

Few odd jobs for carpenter 1) trim bathroom door by 15mm and hang and install hardware. Same frame: patch old latch holes and previous hinge cut outs 2) make new window sill for back window (about 1m long) 3) add hardware to kitchen door 4) Adjust bedroom window to put it back in place 5) add more secure ledge holders for the timber bench in laundry

I have two sheets of 19mm STRUCTAflor Yellow Tongue (3600mm × 600mm) and need each one cut down to 2100mm in length. That’s one straight cross-cut per sheet. The width (600mm) does not need to be changed. The boards are already at my home in Fitzroy North, and the cuts can be done out the front. I don’t have the tools, so you’ll need to bring a circular saw with a guide or a track saw to ensure clean, straight cuts. This is a quick job for someone with the right equipment. Budget: Listed at $50 as a starting point — open to reasonable offers.

Demolish original cupboards in photo and construct a built-in desk and further cupboard space.

5 m back fence both sides (new) Size fence 10m Few m of the other side fence Old fence needs to be washed with hard bristled brush the day prior. Two coats of resene bark to be applied with brush. New fence may need extra 1/2 coat in Order to match the old fence (ie. 2 coats vs 1.5 coats) height 2-2.2m

Unloading wood fire first floor - View all the details of this offer: https://www.airtasker.com/offers/01JY39QS5Z3NAN54N403243P22

I need a wardrobe cabinet carcass built. See design and dimensions attached. Please provide a quote for the carcass only from standard 16mm Melamine panels. Doors are separate and can be discussed later. Thanks, Stephen.

Unloading wood fire upstairs - View all the details of this offer: https://www.airtasker.com/offers/01JXF2Z8MX8MZD7XSJMYVBM61V

Our builder didn’t finish the job properly with our renovations and left gaps in the skirting board around the house and in the tile walls in the kitchen which has given ants a perfect entry into our home. Looking for a handy man (or woman!) to help and fill the gaps in our home. Our home isn’t large (town house) but happy for you to come and see what needs to be done and to quote us. You will need to bring the required gap filler and tools to complete job etc. happy to pay for it if you need to go Bunnings

I have two shelves that need to be hung.