Find experienced local carpenters in Inner South Melbourne

I require a experienced joiner to refresh outdoor cabinetry that is looking old and weather worn. Needs front surface of cupboards and drawers replaced and top of cupboards. Inside of drawers and structure seems fine. Would consider complete rebuild if absolutely required.

Looking for an experienced joiner or carpenter to build and install a new timber handrail and balustrade on an existing internal staircase. Job details: Solid workmanship and attention to detail required. Clean, contemporary finish preferred (open to design suggestions) Must have experience with detailed joinery and staircase work. $2,500 ~$3,000

fix a couple of self closing drawers and replace some broken hardware

Task Title: Joinery Install & Small Framing – Shop Fit-Out (8hr/day) Task Description: We’re looking for a reliable joiner or carpenter to assist with a shop fit-out in Highett. All cabinetry has already been CNC cut and is ready to install. Scope: • Joinery installation (everything pre-cut) • Small framing work • General carpentry tasks (onsite only) • 8-hour workday • Ongoing work available Requirements: • Must have own tools • Experience with shopfitting or cabinetry • ABN preferred • Must be punctual and professional 📍 Location: Highett VIC 📅 Start Date: ASAP 💰 Pay: 7-3.30 (depending on experience)

- Door frame needs fixing - Sliding door needs fixing - Outside cabinet door needs fixing

Just moved houses and my fridge is too high for the cavity. I need the cupboard above to be removed, cut down a further 60-70mm (from the top)to make it shorter, and reinstalled. Current dimensions are: 88w x 45h x 50d.

Existing rangehood to be removed. Existing kitchen joinery cabinet to be replaced with new to suit new rangehood. Rangehood to be installed.

I have just had my gas meter moved location. I am need of a plumber urgently to install roughly 1m of copper and joiner to hook up to the relocated meter. Needing done ASAP as my hot water is currently off. See pictures for reference.

SCOPE: Labour only. 1. Painting: Trims + skirting + kitchen bench/cupboards (outside only). refer to photos. 2. Protection: drop sheets etc must be protected to avoid paint / markings. 3. Access: Easy access, house is vacant. Offers: Fixed price offers only. Paint specification: ALL TRIMS & JOINERY. Use Appropriate primer over stained timber. 2x coats of Semi Gloss Finish - Berger / Dulux "Natural White" or equivalent Equipment Please use own drop sheets and equipment/paint brushes / tape etc. Materials Will supply / reimburse paint materials, please buy from trade shop (trade price) with receipt. Estimate cost prior. Note: House has recently been painted inside and outside. Floors have been newly sanded and stained. House has been cleaned.

Create steel sandwich bracket to connect Kings freestanding awning to steel flat rack on Toyota Prado. Awning in box, steel flat rack already fitted. Require brackets and Kings have said these need to be custom made

Patching up of a small post-water damaged joinery section.

Full Kitchen Installation for Artex Flat pack cargo. - Due date: Needs to be done on Monday, 4 March 2024

IKEA Joinery assemble and install: - Bathroom vanity unit (2). Side by side, same type. Install as first item of list. IKEA Godmorgan. - Desk to wall (1). Supply L brackets and piece of timber to fix to wall. Ikea laminate benchtop, minor cut to suit size of wall. - TV Unit (2). Side by side units, same type. Ikea Besta. - Robes (3). Fix concrete floor / stud wall. IKEA Forsand types, two larger, one smaller type. See images. - Small Laundry including Benchtop (two ikea laminate panels cut to suit) and basic metod cabinets (see image) with enhet overhead shelves (3). - Small Pantry including L shaped benchtop (two ikea laminate panels cut to suit) and basic metod cabinets (see image) and Enhet shelves (4). Date required: 6th December. 2-3 days work. See images. Would like to meet tasker there to discuss prior to make sure all clear on what is required. - Due date: Needs to be done on Wednesday, 6 December 2023

Did our caulking after building and want to fill some gaps that we initially didn't think were needed. Circa 50m worth total max, 50/50 internal/external, but includes: - Cupboards and shelves to plaster wall - Gaps between flashing - Brick wall to timber - Paving to brick wall - Timber to timber One area requires a ladder (provided) to access. - Due date: Flexible

Joinery tasks 1. Iron on laminate edging to 2.2M high cupboard door 2. Adjust 2 x kitchen cupboard doors that have sagged. You'll need to supply black laminate edging to suit 16mm thick 2.2M high door. Naturally I'll reimburse you for that cost. Due date: Needs to be done on this week, Tue (7th) or Wed (8th) or Thu (9th) between hours 7am-5pm. - Due date: Before Thursday, 9 November 2023

Currently building, have 2 bedrooms to put together carcases and install.. also vanity and 2 other boxes. No doors yet required. Price is for someone to come to site - Due date: Flexible

I’ve recently moved house and have a work bench and a set of pidgeon holes/shelving unit that by dimension fit in my new place but they are too big to go through the doorways. It’s above my level of skill to try and dissemble! I would like to make a slight modification to the shelving unit so that it can accomodate a TV. I’m wondering if this is something you could help with? Happy to send room/door measurements/further pics. If possible/ideally someone who has a van/truck - the shelves are in Fitzroy and are going to Caulfield North. I can otherwise organise that separately. - Due date: Before Thursday, 12 October 2023

I have an extraction fan that does not fit my kitchen cupboards, I need a joiner to alter my kitchen cabinets to fit the new extraction fan. - Due date: Flexible

Our vintage caravan (viscount ambassador 1973) reno is now in need of its joinery. The intention is to have it simple and lightweight (90x19/42x19 frame and ply). We have drawn up plan and elevations of what we are wanting and are flexible to work with what’s possible. Can be built in the caravan or made offsite and brought in to be fixed. We are happy with finish to be left raw which can then be painted. Include fixings, draws runs, hinges. I will supply all framing timber and ply. Looking for a reliable and quality finish. Any questions, let me know. - Due date: Before Thursday, 31 August 2023

Would like to get some quotes for a new kitchen island bench. We have a drawing of what we would like (attached, can provide PDF too) and are looking for an idea of cost to supply and install. Task Budget is not indicative of what we expect to pay (obviously, $5 will not cover a kitchen! - just not sure what price to put, hence just looking for quotes at the minute) - Due date: Flexible