Find experienced local carpenters in Caulfield South

In my old house, the kitchen cabinet doors are faded and loose. I need someone to replace all of the kitchen cabinet doors.

Repair and finish installation of skirting boards. • Install bottom cabinet panels (toe kicks). • Add a finishing cover/panel to conceal the skirting boards neatly.

I have 2 wooden trestle tables that I want to make 15cm wider by adding additional wooden pieces to existing table top. each trestle table is approx 175cm long. You will may need to pick up tables but perhaps can do the work on site.

Hello, I am looking for a painter or handyman to refinish my front door. The work includes: * Full sanding * Surface preparation * Primer and exterior paint * Finish in a similar colour to the current door I am planning to proceed soon and wanted to check if there is any flexibility on the price. If we can agree, I can confirm the job immediately. Photo is attached. I look forward to your reply. Kind regards, Tonny

We need a timber base frame of 4mx4mx0.25m H to place a cool room of 800kg weight in the backyard. Note that the timber frame needs to be levelled with existing ground. Budget is a placeholder, please provide your inputs

This platform needs to be completely removed . It is nailed together using pellets. All nails, wood and all its remains need to be taken away as part of the job . Fake grass and potted plants , pots and wood burner stay .

We require timber (blackbutt) decking to be built at one side of the house and existing deck at the back of the house to be sanded and oiled

Handy man needed to fix wood panel in front of gas heater that’s weather worn. Structure still sturdy.

From chat gpt: 1. What they’re called: Broken wooden corbel/bracket under the window sill outside house. 2. Fix suggestion: From the picture, it looks like the corbel has split away where it meets the wall/sill — probably from age, weathering, or moisture. Here are your options: If the piece is still intact: Remove any loose paint/wood fragments. Apply a strong exterior wood adhesive (like Titebond III or similar). Reattach it firmly into position and use exterior-grade screws or nails angled upward into the sill to secure it. Countersink the screws slightly and fill over with exterior wood filler.

A small burn mark (see photo) on a cabinet door needs sanding, filling, and painting to match the existing surface.

Task 1: Burn Mark Repair on Cabinet Door A small burn mark (see photo) on a cabinet door needs sanding, filling, and painting to match the existing surface. Task 2: Repaint Above Cabinet Area The section above the kitchen cabinets has some black marks/discoloration Needs cleaning, light sanding if needed, and repainting with matching white/off-white paint.

I need a cabinet maker or someone with the skills to build a flight case for a PA system. I will supply (cut to size) MDF and all of the hardware.

Build a "lift off lid" road case using pre-cut panels and supplied aluminum trimming. Aluminum edges will need cutting to size and fitting. All wood, hardware, rivets, tape and wheels will be provided. - A rivet gun will need to be supplied by you. - The wood panels will come pre-sanded and painted. Sizes Lid & Base: 1316 x 676 Front & Back: 850 x 1280 Sides: 850 x 676

It is a end of build clean site already cleaned . There is stains on a couple of tiles maybe 3 tiles

Table needs a facelift. 1200 (W) x 2260 (L) x 680 (H) Sand, stain etc. Please quote accordingly. Price is a placeholder.

Wooden window area of about 30cm rotten. Needs repair.

I am looking for help with the following woodwork restoration project. I have these 8 wooden legs (see picture) that have been out in his backyard for decades, but apart from some rot at the tops, they are in very good condition. I would like to have them resanded, and then glued into 2 decorative totems, 4 legs for each of the two totems. Hopefully lining up some of the circumferences on each so that they can join smoothly, and then using long metal dowels or similar to strengthen each join. Then maybe a white wash/stain finish to bring out the grain further. Thanks for your time!

We are looking for someone to build in a simple, small desk and shelving in a bedroom. Includes covering cement sheeting with floor boards and replacing skirt where previous shelving has been removed. Happy to use recycled wood if you have a supply we can select from (or we can source). Straight lines, not fancy. Desk 102cm long and 46 cm deep. Whilst we have suggested $500, we have no idea what something like this costs so keen to hear from anyone who is interested and discuss cost re labor and wood etc.

I have a cupboard. I would like shelves built into the shelves need to be 120 x60cm 3 shelves in total Reinforced underneath so they can take some weight off

Looking for someone handy and experienced to help with a small balcony setup at my apartment. It’s a rental, so everything needs to be removable and damage-free when I move out — no drilling, nothing permanent. What I need done: • Install fake grass (need to purchase or happy to follow your guidance) • Add vertical timber-look panels against a section of the wall for aesthetics + storage potential • Ideally get advice on how best to secure everything down (grass, panels, anything else) in a way that’s solid and clean, but won’t leave marks or damage when removed • Bonus if you can help me level it out neatly or suggest mats under the fake grass for grip and bounce Balcony dimensions: • Bigger section: 510cm (L) x 268cm (W) • Smaller section: 360cm (L) x 191cm (W) Everything will be going on top of outdoor tiles (can show original + AI pics). There’s an outdoor aircon unit that’ll stay where it is. Open to ideas or smarter ways to do it, as long as it looks clean and modern when finished. Ideally looking for someone with attention to detail and experience doing this kind of thing on rentals. Happy to supply the materials if you can guide me, or we can work out a total price including labour + materials if you prefer. I’m based in Caulfield South, working in office 9-5 but either way will make sure someone is here and can work with timing. Cheers! Aron